Avoid cluttering the Kconfig space with debug options that are rarely
used. These can now be enabled and disabled by patching the "#undef DEBUG"
in the source files with "#define DEBUG", conforming to the practice for
the rest of the linux-omap code.
Also, while we're here, some lines in plat-omap/Kconfig use sets of
leading spaces when those lines should start with tabs. Convert most
of them to use tabs.
Signed-off-by: Paul Walmsley <p...@pwsan.com>
Cc: Tony Lindgren <t...@atomide.com>
---
arch/arm/mach-omap2/clockdomain.c | 6 +---
arch/arm/mach-omap2/powerdomain.c | 4 +-
arch/arm/plat-omap/Kconfig | 62 ++++++++++++-------------------------
3 files changed, 23 insertions(+), 49 deletions(-)
diff --git a/arch/arm/mach-omap2/clockdomain.c
b/arch/arm/mach-omap2/clockdomain.c
index fcd8232..1a45ed1 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -2,7 +2,7 @@
* OMAP2/3 clockdomain framework functions
*
* Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2008-2009 Nokia Corporation
*
* Written by Paul Walmsley and Jouni Högander
*
@@ -10,9 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#ifdef CONFIG_OMAP_DEBUG_CLOCKDOMAIN
-# define DEBUG
-#endif
+#undef DEBUG
#include <linux/module.h>
#include <linux/kernel.h>
diff --git a/arch/arm/mach-omap2/powerdomain.c
b/arch/arm/mach-omap2/powerdomain.c
index b6990e3..9708f12 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -10,9 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#ifdef CONFIG_OMAP_DEBUG_POWERDOMAIN
-# define DEBUG
-#endif
+#undef DEBUG
#include <linux/kernel.h>
#include <linux/module.h>
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 64b3f52..b6edaf6 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -42,28 +42,6 @@ config OMAP_DEBUG_LEDS
depends on OMAP_DEBUG_DEVICES
default y if LEDS || LEDS_OMAP_DEBUG
-config OMAP_DEBUG_POWERDOMAIN
- bool "Emit debug messages from powerdomain layer"
- depends on ARCH_OMAP2 || ARCH_OMAP3
- help
- Say Y here if you want to compile in powerdomain layer
- debugging messages for OMAP2/3. These messages can
- provide more detail as to why some powerdomain calls
- may be failing, and will also emit a descriptive message
- for every powerdomain register write. However, the
- extra detail costs some memory.
-
-config OMAP_DEBUG_CLOCKDOMAIN
- bool "Emit debug messages from clockdomain layer"
- depends on ARCH_OMAP2 || ARCH_OMAP3
- help
- Say Y here if you want to compile in clockdomain layer
- debugging messages for OMAP2/3. These messages can
- provide more detail as to why some clockdomain calls
- may be failing, and will also emit a descriptive message
- for every clockdomain register write. However, the
- extra detail costs some memory.
-
config OMAP_RESET_CLOCKS
bool "Reset unused clocks during boot"
depends on ARCH_OMAP
@@ -78,28 +56,28 @@ config OMAP_RESET_CLOCKS
config OMAP_MUX
bool "OMAP multiplexing support"
- depends on ARCH_OMAP
+ depends on ARCH_OMAP
default y
- help
- Pin multiplexing support for OMAP boards. If your bootloader
- sets the multiplexing correctly, say N. Otherwise, or if unsure,
- say Y.
+ help
+ Pin multiplexing support for OMAP boards. If your bootloader
+ sets the multiplexing correctly, say N. Otherwise, or if unsure,
+ say Y.
config OMAP_MUX_DEBUG
bool "Multiplexing debug output"
- depends on OMAP_MUX
- help
- Makes the multiplexing functions print out a lot of debug info.
- This is useful if you want to find out the correct values of the
- multiplexing registers.
+ depends on OMAP_MUX
+ help
+ Makes the multiplexing functions print out a lot of debug info.
+ This is useful if you want to find out the correct values of the
+ multiplexing registers.
config OMAP_MUX_WARNINGS
bool "Warn about pins the bootloader didn't set up"
- depends on OMAP_MUX
- default y
- help
+ depends on OMAP_MUX
+ default y
+ help
Choose Y here to warn whenever driver initialization logic needs
- to change the pin multiplexing setup. When there are no warnings
+ to change the pin multiplexing setup. When there are no warnings
printed, it's safe to deselect OMAP_MUX for your product.
config OMAP_MCBSP
@@ -125,7 +103,7 @@ config OMAP_IOMMU_DEBUG
tristate
choice
- prompt "System timer"
+ prompt "System timer"
default OMAP_MPU_TIMER
config OMAP_MPU_TIMER
@@ -148,11 +126,11 @@ config OMAP_32K_TIMER
endchoice
config OMAP_32K_TIMER_HZ
- int "Kernel internal timer frequency for 32KHz timer"
- range 32 1024
- depends on OMAP_32K_TIMER
- default "128"
- help
+ int "Kernel internal timer frequency for 32KHz timer"
+ range 32 1024
+ depends on OMAP_32K_TIMER
+ default "128"
+ help
Kernel internal timer frequency should be a divisor of 32768,
such as 64 or 128.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
