Reprogram the module's OCP_SYSCONFIG register after module reset (SOFTRESET
= 1). This may not be needed, but the definition of the reset performed by
the SOFTRESET bit is unclear.
Kevin Hilman <khil...@deeprootsystems.com> tested an earlier version of
this patch.
Signed-off-by: Paul Walmsley <p...@pwsan.com>
Tested-by: Kevin Hilman <khil...@deeprootsystems.com>
---
arch/arm/mach-omap2/omap_hwmod.c | 18 +++++++++++++-----
1 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 633b216..4aab1b8 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -948,11 +948,19 @@ static int _setup(struct omap_hwmod *oh)
_enable(oh);
- if (!(oh->flags & HWMOD_INIT_NO_RESET))
- _reset(oh);
-
- /* XXX OCP AUTOIDLE bit? */
- /* XXX OCP ENAWAKEUP bit? */
+ if (!(oh->flags & HWMOD_INIT_NO_RESET)) {
+ /*
+ * XXX Do the OCP_SYSCONFIG bits need to be
+ * reprogrammed after a reset? If not, then this can
+ * be removed. If they do, then probably the
+ * _enable() function should be split to avoid the
+ * rewrite of the OCP_SYSCONFIG register.
+ */
+ if (oh->sysconfig) {
+ _update_sysc_cache(oh);
+ _sysc_enable(oh);
+ }
+ }
if (!(oh->flags & HWMOD_INIT_NO_IDLE))
_idle(oh);
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
