>-----Original Message-----
>From: Paul Walmsley [mailto:p...@pwsan.com]
>Sent: Thursday, December 03, 2009 7:01 AM
>To: Sonasath, Moiz
>Cc: linux-omap@vger.kernel.org; Pandita, Vikram; G, Manjunath Kondaiah
>Subject: RE: I2C broken on OMAP 2430SDP?
>
>Hello Moiz,
>
>On Wed, 2 Dec 2009, Sonasath, Moiz wrote:
>
>> Hello Paul!
<snip>
>bio: create slab <bio-0> at 0
><6>i2c_omap i2c_omap.1: bus 1 rev3.6 at 400 kHz
><6>i2c_omap i2c_omap.2: bus 2 rev3.6 at 2600 kHz
By any chance is this related to running i2c at slower clock speed?
commit 6b61a83b31744d143b0e7bc92f463d831319eabc
The maximum I2C speed depends on the system clock for GAIA:
2.2 MHz (sys-clk = 19.2 MHz)
2.4 MHz (sys-clk = 26 MHz)
2.9 MHz (sys-clk = 38.4 MHz)
><4>i2c_omap i2c_omap.2: timeout waiting for bus ready
><4>i2c_omap i2c_omap.2: timeout waiting for bus ready
><4>i2c_omap i2c_omap.2: timeout waiting for bus ready
><3>twl4030: clock init err [-110]
><4>i2c_omap i2c_omap.2: timeout waiting for bus ready
><3>twl4030: err -110 initializing gpio IMR
><4>i2c_omap i2c_omap.2: timeout waiting for bus ready
><3>twl4030: err -110 initializing gpio SIH_CTRL
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
