>
> Cool. Can you please split the the patches into following
> separate patches:
>
> 1. Add minimal board support
> 2. Add defconfig
> 3. Add ASoC support
> 4. Add DSS2 support
Ok, so can the DSS2 related stuff be ifdef-ed in the board file ,or
does it have to be completely seperated ?
Thanks
> Then please run all the patches through scripts/checkpatch.pl --strict
> and fix the errors and warnings.
>
> And please make sure things keep compiling through the
> all the patches, otherwise git bisect will break.
>
> Cheers,
>
> Tony
>
>
>> /Signed-off-by Daniel Toussaint <dan...@dmhome.net>
>>
>>
>> ///
>
>> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
>> index 16c0c13..e5493a5 100644
>> --- a/arch/arm/mach-omap2/Kconfig
>> +++ b/arch/arm/mach-omap2/Kconfig
>> @@ -151,6 +151,11 @@ config MACH_OMAP_4430SDP
>> bool "OMAP 4430 SDP board"
>> depends on ARCH_OMAP4
>>
>> +config MACH_OMAP3_THUNDER
>> + bool "Thunder OMAP3530 board"
>> + depends on ARCH_OMAP3 && ARCH_OMAP34XX
>> + select OMAP_PACKAGE_CUS
>> +
>> config OMAP3_EMU
>> bool "OMAP3 debugging peripherals"
>> depends on ARCH_OMAP3
>> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
>> index 0c5d886..bd76499 100644
>> --- a/arch/arm/mach-omap2/Makefile
>> +++ b/arch/arm/mach-omap2/Makefile
>> @@ -105,6 +105,9 @@ obj-$(CONFIG_MACH_OMAP_4430SDP) +=
>> board-4430sdp.o
>>
>> obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
>>
>> +obj-$(CONFIG_MACH_OMAP3_THUNDER) += board-omap3thunder.o \
>> + mmc-twl4030.o
>> +
>> # Platform specific device init code
>> obj-y += usb-musb.o
>> obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
>> diff --git a/arch/arm/mach-omap2/board-omap3thunder.c
>> b/arch/arm/mach-omap2/board-omap3thunder.c
>> new file mode 100644
>> index 0000000..d6ea9de
>> --- /dev/null
>> +++ b/arch/arm/mach-omap2/board-omap3thunder.c
>> @@ -0,0 +1,647 @@
>> +/*
>> + * linux/arch/arm/mach-omap2/board-omap3touchbook.c
>> + *
>> + * Copyright (C) 2009 Technexion
>> + *
>> + * Modified from mach-omap2/board-omap3beagleboard.c
>> + *
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/init.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/delay.h>
>> +#include <linux/err.h>
>> +#include <linux/clk.h>
>> +#include <linux/io.h>
>> +#include <linux/leds.h>
>> +#include <linux/gpio.h>
>> +#include <linux/input.h>
>> +#include <linux/gpio_keys.h>
>> +
>> +#include <linux/mtd/mtd.h>
>> +#include <linux/mtd/partitions.h>
>> +#include <linux/mtd/nand.h>
>> +
>> +#include <linux/regulator/machine.h>
>> +#include <linux/i2c/twl4030.h>
>> +
>> +#include <mach/hardware.h>
>> +#include <asm/mach-types.h>
>> +#include <asm/mach/arch.h>
>> +#include <asm/mach/map.h>
>> +#include <asm/mach/flash.h>
>> +
>> +#include <plat/board.h>
>> +#include <plat/usb.h>
>> +#include <linux/usb/otg.h>
>> +#include <plat/common.h>
>> +#include <plat/gpmc.h>
>> +#include <plat/nand.h>
>> +#include <plat/mux.h>
>> +#include <plat/display.h>
>> +
>> +#include "mmc-twl4030.h"
>> +#include "mux.h"
>> +
>> +
>> +#include <linux/spi/spi.h>
>> +#include <linux/spi/ads7846.h>
>> +#include <plat/mcspi.h>
>> +
>> +#include <plat/mmc.h>
>> +
>> +
>> +#define OMAP3_THUNDER_TS_GPIO 136
>> +
>> +#define GPMC_CS0_BASE 0x60
>> +#define GPMC_CS_SIZE 0x30
>> +
>> +#define NAND_BLOCK_SIZE SZ_128K
>> +
>> +#define THUNDER_DVI_PANEL_EN_GPIO 199 /* GPIO 7 on TWL4030 */
>> +#define THUNDER_LCD_PANEL_ENVDD 138
>> +#define THUNDER_LCD_PON 139
>> +
>> +#define TWL_INTBR_GPBR1 0x0c
>> +#define TWL_INTBR_PMBR1 0x0d
>> +#define TWL_PWM0_ON 0x00
>> +#define TWL_PWM0_OFF 0x01
>> +
>> +static int lcd_enabled;
>> +static int dvi_enabled;
>> +
>> +static void __init thunder_display_init(void)
>> +{
>> + gpio_request(THUNDER_LCD_PANEL_ENVDD, "lcd_panel_envdd");
>> + gpio_request(THUNDER_LCD_PON, "lcd_panel_pon");
>> + gpio_direction_output(THUNDER_LCD_PON, 1);
>> + gpio_direction_output(THUNDER_LCD_PANEL_ENVDD, 0);
>> + return;
>> +}
>> +
>> +static int thunder_enable_lcd(struct omap_dss_device *dssdev)
>> +{
>> +
>> + if (dvi_enabled) {
>> + printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
>> + return -EINVAL;
>> + }
>> +
>> + gpio_set_value(THUNDER_LCD_PANEL_ENVDD, 0);
>> + gpio_set_value(THUNDER_LCD_PON, 1);
>> +
>> + /* This turns on the backlight, move this to backlight code later */
>> + twl4030_i2c_write_u8(TWL4030_MODULE_PWM0, 0x81, TWL_PWM0_ON);
>> + twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, 0x04, TWL_INTBR_PMBR1);
>> + twl4030_i2c_write_u8(TWL4030_MODULE_PWM0, 6 + 40 , TWL_PWM0_OFF);
>> + twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, 0x05, TWL_INTBR_GPBR1);
>> + twl4030_i2c_write_u8(TWL4030_MODULE_PWM0, 6 + 50 , TWL_PWM0_OFF);
>> + /* End of turning on Backlight */
>> +
>> + lcd_enabled = 1;
>> + return 0;
>> +}
>> +
>> +static void thunder_disable_lcd(struct omap_dss_device *dssdev)
>> +{
>> + gpio_set_value(THUNDER_LCD_PANEL_ENVDD, 1);
>> + gpio_set_value(THUNDER_LCD_PON, 0);
>> + lcd_enabled = 0;
>> +}
>> +
>> +
>> +static int thunder_set_backlight ( struct omap_dss_device *dssdev, int
>> level)
>> +{
>> + return 0;
>> +}
>> +
>> +static int thunder_get_backlight ( struct omap_dss_device *dssdev)
>> +{
>> + return 10;
>> +}
>> +
>> +
>> +static struct omap_dss_device thunder_lcd_device = {
>> + .type = OMAP_DISPLAY_TYPE_DPI,
>> + .name = "lcd",
>> + .driver_name = "panel-lg-lb043wq2",
>> + .phy.dpi.data_lines = 24,
>> + .platform_enable = thunder_enable_lcd,
>> + .platform_disable = thunder_disable_lcd,
>> +
>> + .get_backlight = thunder_get_backlight,
>> + .set_backlight = thunder_set_backlight,
>> + .max_backlight_level = 100,
>> +};
>> +
>> +static int thunder_enable_dvi(struct omap_dss_device *dssdev)
>> +{
>> + if (lcd_enabled) {
>> + printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
>> + return -EINVAL;
>> + }
>> +
>> + gpio_set_value(THUNDER_DVI_PANEL_EN_GPIO, 1);
>> + dvi_enabled = 1;
>> +
>> + return 0;
>> +}
>> +
>> +static void thunder_disable_dvi(struct omap_dss_device *dssdev)
>> +{
>> + gpio_set_value(THUNDER_DVI_PANEL_EN_GPIO, 0);
>> + dvi_enabled = 0;
>> +}
>> +
>> +static struct omap_dss_device thunder_dvi_device = {
>> + .type = OMAP_DISPLAY_TYPE_DPI,
>> + .name = "dvi",
>> + .driver_name = "generic_panel",
>> + .phy.dpi.data_lines = 24,
>> + .platform_enable = thunder_enable_dvi,
>> + .platform_disable = thunder_disable_dvi,
>> +};
>> +
>> +static struct omap_dss_device *thunder_dss_devices[] = {
>> + &thunder_lcd_device,
>> + &thunder_dvi_device,
>> +};
>> +
>> +static struct omap_dss_board_info thunder_dss_data = {
>> + .num_devices = ARRAY_SIZE(thunder_dss_devices),
>> + .devices = thunder_dss_devices,
>> + .default_device = &thunder_lcd_device,
>> +};
>> +
>> +static struct platform_device thunder_dss_device = {
>> + .name = "omapdss",
>> + .id = -1,
>> + .dev = {
>> + .platform_data = &thunder_dss_data,
>> + },
>> +};
>> +
>> +static struct regulator_consumer_supply thunder_vdds_dsi_supply = {
>> + .supply = "vdds_dsi",
>> + .dev = &thunder_dss_device.dev,
>> +};
>> +
>> +static struct mtd_partition omap3thunder_nand_partitions[] = {
>> + /* All the partition sizes are listed in terms of NAND block size */
>> + {
>> + .name = "X-Loader",
>> + .offset = 0,
>> + .size = 4 * NAND_BLOCK_SIZE,
>> + .mask_flags = MTD_WRITEABLE, /* force read-only */
>> + },
>> + {
>> + .name = "U-Boot",
>> + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
>> + .size = 15 * NAND_BLOCK_SIZE,
>> + .mask_flags = MTD_WRITEABLE, /* force read-only */
>> + },
>> + {
>> + .name = "U-Boot Env",
>> + .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
>> + .size = 1 * NAND_BLOCK_SIZE,
>> + },
>> + {
>> + .name = "Kernel",
>> + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
>> + .size = 32 * NAND_BLOCK_SIZE,
>> + },
>> + {
>> + .name = "File System",
>> + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
>> + .size = MTDPART_SIZ_FULL,
>> + },
>> +};
>> +
>> +static struct omap_nand_platform_data omap3thunder_nand_data = {
>> + .options = NAND_BUSWIDTH_16,
>> + .parts = omap3thunder_nand_partitions,
>> + .nr_parts = ARRAY_SIZE(omap3thunder_nand_partitions),
>> + .dma_channel = -1, /* disable DMA in OMAP NAND driver */
>> + .nand_setup = NULL,
>> + .dev_ready = NULL,
>> +};
>> +
>> +static struct resource omap3thunder_nand_resource = {
>> + .flags = IORESOURCE_MEM,
>> +};
>> +
>> +static struct platform_device omap3thunder_nand_device = {
>> + .name = "omap2-nand",
>> + .id = -1,
>> + .dev = {
>> + .platform_data = &omap3thunder_nand_data,
>> + },
>> + .num_resources = 1,
>> + .resource = &omap3thunder_nand_resource,
>> +};
>> +
>> +#include "sdram-micron-mt46h32m32lf-6.h"
>> +
>> +static struct omap_uart_config omap3_thunder_uart_config __initdata = {
>> + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
>> +};
>> +
>> +static struct twl4030_usb_data thunder_usb_data = {
>> + .usb_mode = T2_USB_MODE_ULPI,
>> +};
>> +
>> +static struct twl4030_hsmmc_info mmc[] = {
>> + {
>> + .mmc = 1,
>> + .wires = 8,
>> + .gpio_cd = -EINVAL,
>> + .gpio_wp = 29,
>> + },
>> + {
>> + .mmc = 2,
>> + .wires = 4,
>> + .gpio_cd = -EINVAL,
>> + .gpio_wp = -EINVAL,
>> +
>> + },
>> + {} /* Terminator */
>> +};
>> +
>> +static struct regulator_consumer_supply thunder_vmmc1_supply = {
>> + .supply = "vmmc",
>> +};
>> +
>> +static struct regulator_consumer_supply thunder_vmmc2_supply = {
>> + .supply = "vmmc",
>> +};
>> +
>> +
>> +static struct regulator_consumer_supply thunder_vsim_supply = {
>> + .supply = "vmmc_aux",
>> +};
>> +
>> +static struct gpio_led gpio_leds[] = {
>> + {
>> + .name = "thunderboard::usr0",
>> + .default_trigger = "heartbeat",
>> + .gpio = -EINVAL, /* gets replaced */
>> + .active_low = true,
>> + },
>> +};
>> +
>> +static int thunder_twl_gpio_setup(struct device *dev,
>> + unsigned gpio, unsigned ngpio)
>> +{
>> + omap_mux_init_gpio(29,OMAP_PIN_INPUT);
>> + mmc[0].gpio_cd = gpio + 0;
>> + twl4030_mmc_init(mmc);
>> +
>> + /* link regulators to MMC adapters */
>> + thunder_vmmc1_supply.dev = mmc[0].dev;
>> + thunder_vmmc2_supply.dev = mmc[1].dev;
>> + thunder_vsim_supply.dev = mmc[0].dev;
>> +
>> + /* the LED marked LED 2 (LEDA) */
>> + gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
>> +
>> + /* gpio + 7 == DVI Enable */
>> + gpio_request(gpio + 7, "EN_DVI");
>> + gpio_direction_output(gpio + 7, 0);
>> +
>> + return 0;
>> +}
>> +
>> +static struct twl4030_gpio_platform_data thunder_gpio_data = {
>> + .gpio_base = OMAP_MAX_GPIO_LINES,
>> + .irq_base = TWL4030_GPIO_IRQ_BASE,
>> + .irq_end = TWL4030_GPIO_IRQ_END,
>> + .use_leds = false,
>> + .pullups = BIT(1),
>> + .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
>> + | BIT(15) | BIT(16) | BIT(17),
>> + .setup = thunder_twl_gpio_setup,
>> +};
>> +
>> +
>> +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220
>> mA) */
>> +static struct regulator_init_data thunder_vmmc1 = {
>> + .constraints = {
>> + .min_uV = 1850000,
>> + .max_uV = 3150000,
>> + .valid_modes_mask = REGULATOR_MODE_NORMAL
>> + | REGULATOR_MODE_STANDBY,
>> + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
>> + | REGULATOR_CHANGE_MODE
>> + | REGULATOR_CHANGE_STATUS,
>> + },
>> + .num_consumer_supplies = 1,
>> + .consumer_supplies = &thunder_vmmc1_supply,
>> +};
>> +
>> +
>> +static struct regulator_init_data thunder_vmmc2 = {
>> + .constraints = {
>> + .min_uV = 1850000,
>> + .max_uV = 3150000,
>> + .apply_uV = true,
>> + .valid_modes_mask = REGULATOR_MODE_NORMAL
>> + | REGULATOR_MODE_STANDBY,
>> + .valid_ops_mask = REGULATOR_CHANGE_MODE
>> + | REGULATOR_CHANGE_STATUS,
>> + },
>> + .num_consumer_supplies = 1,
>> + .consumer_supplies = &thunder_vmmc2_supply,
>> +};
>> +
>> +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
>> +static struct regulator_init_data thunder_vsim = {
>> + .constraints = {
>> + .min_uV = 1800000,
>> + .max_uV = 3000000,
>> + .valid_modes_mask = REGULATOR_MODE_NORMAL
>> + | REGULATOR_MODE_STANDBY,
>> + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
>> + | REGULATOR_CHANGE_MODE
>> + | REGULATOR_CHANGE_STATUS,
>> + },
>> + .num_consumer_supplies = 1,
>> + .consumer_supplies = &thunder_vsim_supply,
>> +};
>> +
>> +static struct regulator_consumer_supply thunder_vdda_dac_supply = {
>> + .supply = "vdda_dac",
>> + .dev = &thunder_dss_device.dev,
>> +};
>> +
>> +
>> +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
>> +static struct regulator_init_data thunder_vdac = {
>> + .constraints = {
>> + .min_uV = 1800000,
>> + .max_uV = 1800000,
>> + .apply_uV = true,
>> + .valid_modes_mask = REGULATOR_MODE_NORMAL
>> + | REGULATOR_MODE_STANDBY,
>> + .valid_ops_mask = REGULATOR_CHANGE_MODE
>> + | REGULATOR_CHANGE_STATUS,
>> + },
>> + .num_consumer_supplies = 1,
>> + .consumer_supplies = &thunder_vdda_dac_supply,
>> +};
>> +
>> +/* VPLL2 for digital video outputs */
>> +static struct regulator_init_data thunder_vpll2 = {
>> + .constraints = {
>> + .name = "VDVI",
>> + .min_uV = 1800000,
>> + .max_uV = 1800000,
>> + .valid_modes_mask = REGULATOR_MODE_NORMAL
>> + | REGULATOR_MODE_STANDBY,
>> + .valid_ops_mask = REGULATOR_CHANGE_MODE
>> + | REGULATOR_CHANGE_STATUS,
>> + },
>> + .num_consumer_supplies = 1,
>> + .consumer_supplies = &thunder_vdds_dsi_supply,
>> +};
>> +
>> +
>> +
>> +static struct twl4030_platform_data thunder_twldata = {
>> + .irq_base = TWL4030_IRQ_BASE,
>> + .irq_end = TWL4030_IRQ_END,
>> +
>> + /* platform_data for children goes here */
>> + .usb = &thunder_usb_data,
>> + .gpio = &thunder_gpio_data,
>> + .vmmc1 = &thunder_vmmc1,
>> + .vmmc2 = &thunder_vmmc2,
>> + .vsim = &thunder_vsim,
>> + .vdac = &thunder_vdac,
>> + .vpll2 = &thunder_vpll2,
>> +};
>> +
>> +static struct i2c_board_info __initdata thunder_i2c_boardinfo[] = {
>> + {
>> + I2C_BOARD_INFO("twl4030", 0x48),
>> + .flags = I2C_CLIENT_WAKE,
>> + .irq = INT_34XX_SYS_NIRQ,
>> + .platform_data = &thunder_twldata,
>> + },
>> +};
>> +
>> +static int __init omap3_thunder_i2c_init(void)
>> +{
>> + omap_register_i2c_bus(1, 2600, thunder_i2c_boardinfo,
>> ARRAY_SIZE(thunder_i2c_boardinfo));
>> + omap_register_i2c_bus(2, 100,NULL, 0);
>> + omap_register_i2c_bus(3, 100, NULL, 0);
>> + return 0;
>> +}
>> +
>> +static void __init omap3_thunder_init_irq(void)
>> +{
>> + omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
>> mt46h32m32lf6_sdrc_params);
>> + omap_init_irq();
>> + omap_gpio_init();
>> +}
>> +
>> +static struct gpio_led_platform_data gpio_led_info = {
>> + .leds = gpio_leds,
>> + .num_leds = ARRAY_SIZE(gpio_leds),
>> +};
>> +
>> +static struct platform_device leds_gpio = {
>> + .name = "leds-gpio",
>> + .id = -1,
>> + .dev = {
>> + .platform_data = &gpio_led_info,
>> + },
>> +};
>> +
>> +static struct gpio_keys_button gpio_buttons[] = {
>> + {
>> + .code = BTN_EXTRA,
>> + .gpio = 7,
>> + .desc = "user",
>> + .wakeup = 1,
>> + },
>> +};
>> +
>> +static struct gpio_keys_platform_data gpio_key_info = {
>> + .buttons = gpio_buttons,
>> + .nbuttons = ARRAY_SIZE(gpio_buttons),
>> +};
>> +
>> +static struct platform_device keys_gpio = {
>> + .name = "gpio-keys",
>> + .id = -1,
>> + .dev = {
>> + .platform_data = &gpio_key_info,
>> + },
>> +};
>> +
>> +static void ads7846_dev_init(void)
>> +{
>> + if (gpio_request(OMAP3_THUNDER_TS_GPIO, "ADS7846 pendown") < 0)
>> + printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
>> +
>> + gpio_direction_input(OMAP3_THUNDER_TS_GPIO);
>> +
>> + omap_set_gpio_debounce(OMAP3_THUNDER_TS_GPIO, 1);
>> + omap_set_gpio_debounce_time(OMAP3_THUNDER_TS_GPIO, 0xa);
>> +}
>> +
>> +static int ads7846_get_pendown_state(void)
>> +{
>> + return !gpio_get_value(OMAP3_THUNDER_TS_GPIO);
>> +}
>> +
>> +struct ads7846_platform_data ads7846_config = {
>> + .x_max = 0x0fff,
>> + .y_max = 0x0fff,
>> + .x_plate_ohms = 180,
>> + .pressure_max = 255,
>> + .debounce_max = 10,
>> + .debounce_tol = 3,
>> + .debounce_rep = 1,
>> + .get_pendown_state = ads7846_get_pendown_state,
>> + .keep_vref_on = 1,
>> + .settle_delay_usecs = 150,
>> +};
>> +
>> +
>> +static struct omap2_mcspi_device_config ads7846_mcspi_config = {
>> + .turbo_mode = 0,
>> + .single_channel = 1, /* 0: slave, 1: master */
>> +};
>> +
>> +
>> +struct spi_board_info omap3thunder_spi_board_touch[] = {
>> + {
>> + .modalias = "ads7846",
>> + .bus_num = 1,
>> + .chip_select = 0,
>> + .max_speed_hz = 1500000,
>> + .controller_data = &ads7846_mcspi_config,
>> + .irq = OMAP_GPIO_IRQ(OMAP3_THUNDER_TS_GPIO),
>> + .platform_data = &ads7846_config,
>> + },
>> +};
>> +
>> +
>> +/* G-sensor on SPI bus 4 */
>> +static struct spi_board_info omap3thunder_spi_board_info[] = {
>> + {
>> + .modalias = "spidev",
>> + .max_speed_hz = 1500000,
>> + .bus_num = 4,
>> + .chip_select = 0,
>> + .mode = SPI_MODE_0,
>> + },
>> +};
>> +
>> +static struct omap_board_config_kernel omap3_thunder_config[] __initdata = {
>> +};
>> +
>> +static struct platform_device *omap3_thunder_devices[] __initdata = {
>> + &thunder_dss_device,
>> + &leds_gpio,
>> + &keys_gpio,
>> +};
>> +
>> +static void __init omap3thunder_flash_init(void)
>> +{
>> + u8 cs = 0;
>> + u8 nandcs = GPMC_CS_NUM + 1;
>> +
>> + u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
>> +
>> + /* find out the chip-select on which NAND exists */
>> + while (cs < GPMC_CS_NUM) {
>> + u32 ret = 0;
>> + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
>> +
>> + if ((ret & 0xC00) == 0x800) {
>> + printk(KERN_INFO "Found NAND on CS%d\n", cs);
>> + if (nandcs > GPMC_CS_NUM)
>> + nandcs = cs;
>> + }
>> + cs++;
>> + }
>> +
>> + if (nandcs > GPMC_CS_NUM) {
>> + printk(KERN_INFO "NAND: Unable to find configuration "
>> + "in GPMC\n ");
>> + return;
>> + }
>> +
>> + if (nandcs < GPMC_CS_NUM) {
>> + omap3thunder_nand_data.cs = nandcs;
>> + omap3thunder_nand_data.gpmc_cs_baseaddr = (void *)
>> + (gpmc_base_add + GPMC_CS0_BASE + nandcs *
>> GPMC_CS_SIZE);
>> + omap3thunder_nand_data.gpmc_baseaddr = (void *)
>> (gpmc_base_add);
>> +
>> + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
>> + if (platform_device_register(&omap3thunder_nand_device) < 0)
>> + printk(KERN_ERR "Unable to register NAND device\n");
>> + }
>> +}
>> +
>> +
>> +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
>> + .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
>> + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
>> + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
>> +
>> + .phy_reset = false,
>> + .reset_gpio_port[0] = -EINVAL,
>> + .reset_gpio_port[1] = 162,
>> + .reset_gpio_port[2] = -EINVAL
>> +};
>> +
>> +static void __init omap3_thunder_init(void)
>> +{
>> + omap3_thunder_i2c_init();
>> +
>> + /* Turn on Wireless LAN */
>> + gpio_request( 157 , "WIFI ENABLE");
>> + gpio_direction_output( 157, 0);
>> +
>> + platform_add_devices(omap3_thunder_devices,
>> + ARRAY_SIZE(omap3_thunder_devices));
>> + omap_board_config = omap3_thunder_config;
>> + omap_board_config_size = ARRAY_SIZE(omap3_thunder_config);
>> + omap_serial_init();
>> +
>> + usb_musb_init();
>> + usb_ehci_init(&ehci_pdata);
>> + omap3thunder_flash_init();
>> +
>> + ads7846_dev_init();
>> + spi_register_board_info(omap3thunder_spi_board_touch,
>> ARRAY_SIZE(omap3thunder_spi_board_touch));
>> + spi_register_board_info(omap3thunder_spi_board_info,
>> ARRAY_SIZE(omap3thunder_spi_board_info));
>> +
>> + thunder_display_init();
>> +}
>> +
>> +static void __init omap3_thunder_map_io(void)
>> +{
>> + omap2_set_globals_343x();
>> + omap2_map_common_io();
>> +}
>> +
>> +MACHINE_START(OMAP3_THUNDER, "OMAP3 Thunder Board")
>> + /* Maintainer: Daniel Toussaint daniel.toussa...@technexion.com */
>> + .phys_io = 0x48000000,
>> + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
>> + .boot_params = 0x80000100,
>> + .map_io = omap3_thunder_map_io,
>> + .init_irq = omap3_thunder_init_irq,
>> + .init_machine = omap3_thunder_init,
>> + .timer = &omap_timer,
>> +MACHINE_END
>> diff --git a/drivers/video/omap2/displays/Kconfig
>> b/drivers/video/omap2/displays/Kconfig
>> index 79d2861..a831fff 100644
>> --- a/drivers/video/omap2/displays/Kconfig
>> +++ b/drivers/video/omap2/displays/Kconfig
>> @@ -25,4 +25,11 @@ config PANEL_TAAL
>> help
>> Taal DSI command mode panel from TPO.
>>
>> +config PANEL_LG_LB043WQ2
>> + tristate "LG LB043WQ2 Panel"
>> + depends on OMAP2_DSS
>> + help
>> + LG LB043WQ2 Panel on Thunder board
>> +
>> +
>> endmenu
>> diff --git a/drivers/video/omap2/displays/Makefile
>> b/drivers/video/omap2/displays/Makefile
>> index d44e765..ae0c956 100644
>> --- a/drivers/video/omap2/displays/Makefile
>> +++ b/drivers/video/omap2/displays/Makefile
>> @@ -3,3 +3,5 @@ obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) +=
>> panel-samsung-lte430wq-f0c.o
>> obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
>>
>> obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
>> +obj-$(CONFIG_PANEL_LG_LB043WQ2) += panel-lg-lb043wq2.o
>> +
>> diff --git a/drivers/video/omap2/displays/panel-lg-lb043wq2.c
>> b/drivers/video/omap2/displays/panel-lg-lb043wq2.c
>> new file mode 100644
>> index 0000000..57a74f6
>> --- /dev/null
>> +++ b/drivers/video/omap2/displays/panel-lg-lb043wq2.c
>> @@ -0,0 +1,118 @@
>> +/*
>> + * LCD panel driver for LG LB043WQ2 panel
>> + *
>> + * Daniel Toussaint <daniel.toussa...@technexion.com>
>> + *
>> + * Modified from Sharp LS037V7DW01
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published
>> by
>> + * the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but
>> WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along
>> with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +
>> +
>> +#include <linux/module.h>
>> +#include <linux/delay.h>
>> +
>> +#include <plat/display.h>
>> +
>> +static struct omap_video_timings lg_lb043wq2_timings = {
>> + .x_res = 480,
>> + .y_res = 272,
>> +
>> + .hsw = 41,
>> + .hfp = 8,
>> + .hbp = 45-41,
>> +
>> + .vsw = 10,
>> + .vfp = 4,
>> + .vbp = 12-10,
>> +
>> +
>> + .pixel_clock = 8000,
>> +
>> +};
>> +
>> +static int lg_lb043wq2_panel_probe(struct omap_dss_device *dssdev)
>> +{
>> + dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
>> + OMAP_DSS_LCD_IHS;
>> + dssdev->panel.timings = lg_lb043wq2_timings;
>> +
>> + return 0;
>> +}
>> +
>> +static void lg_lb043wq2_panel_remove(struct omap_dss_device *dssdev)
>> +{
>> +}
>> +
>> +static int lg_lb043wq2_panel_enable(struct omap_dss_device *dssdev)
>> +{
>> + int r = 0;
>> +
>> + /* wait couple of vsyncs until enabling the LCD */
>> + msleep(50);
>> +
>> + if (dssdev->platform_enable)
>> + r = dssdev->platform_enable(dssdev);
>> +
>> + return r;
>> +}
>> +
>> +static void lg_lb043wq2_panel_disable(struct omap_dss_device *dssdev)
>> +{
>> + if (dssdev->platform_disable)
>> + dssdev->platform_disable(dssdev);
>> +
>> + /* wait at least 5 vsyncs after disabling the LCD */
>> +
>> + msleep(100);
>> +}
>> +
>> +static int lg_lb043wq2_panel_suspend(struct omap_dss_device *dssdev)
>> +{
>> + lg_lb043wq2_panel_disable(dssdev);
>> + return 0;
>> +}
>> +
>> +static int lg_lb043wq2_panel_resume(struct omap_dss_device *dssdev)
>> +{
>> + return lg_lb043wq2_panel_enable(dssdev);
>> +}
>> +
>> +static struct omap_dss_driver lg_lb043wq2_driver = {
>> + .probe = lg_lb043wq2_panel_probe,
>> + .remove = lg_lb043wq2_panel_remove,
>> +
>> + .enable = lg_lb043wq2_panel_enable,
>> + .disable = lg_lb043wq2_panel_disable,
>> + .suspend = lg_lb043wq2_panel_suspend,
>> + .resume = lg_lb043wq2_panel_resume,
>> +
>> + .driver = {
>> + .name = "panel-lg-lb043wq2",
>> + .owner = THIS_MODULE,
>> + },
>> +};
>> +
>> +static int __init lg_lb043wq2_panel_drv_init(void)
>> +{
>> + return omap_dss_register_driver(&lg_lb043wq2_driver);
>> +}
>> +
>> +static void __exit lg_lb043wq2_panel_drv_exit(void)
>> +{
>> + omap_dss_unregister_driver(&lg_lb043wq2_driver);
>> +}
>> +
>> +module_init(lg_lb043wq2_panel_drv_init);
>> +module_exit(lg_lb043wq2_panel_drv_exit);
>> +MODULE_LICENSE("GPL");
>> diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
>> index 61952aa..2f6c6ae 100644
>> --- a/sound/soc/omap/Kconfig
>> +++ b/sound/soc/omap/Kconfig
>> @@ -116,3 +116,13 @@ config SND_OMAP_SOC_IGEP0020
>> select SND_SOC_TWL4030
>> help
>> Say Y if you want to add support for Soc audio on IGEP v2 board.
>> +
>> +config SND_OMAP_SOC_OMAP3_THUNDER
>> + tristate "SoC Audio support for OMAP3 Thunder"
>> + depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_THUNDER
>> + select SND_OMAP_SOC_MCBSP
>> + select SND_SOC_TWL4030
>> + help
>> + Say Y if you want to add support for SoC audio on the Thunder
>> Board.
>> +
>> +
>> diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
>> index d49458a..08c0918 100644
>> --- a/sound/soc/omap/Makefile
>> +++ b/sound/soc/omap/Makefile
>> @@ -18,6 +18,7 @@ snd-soc-omap3pandora-objs := omap3pandora.o
>> snd-soc-omap3beagle-objs := omap3beagle.o
>> snd-soc-zoom2-objs := zoom2.o
>> snd-soc-igep0020-objs := igep0020.o
>> +snd-soc-omap3thunder-objs := omap3thunder.o
>>
>> obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o
>> obj-$(CONFIG_SND_OMAP_SOC_AMS_DELTA) += snd-soc-ams-delta.o
>> @@ -31,3 +32,5 @@ obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) +=
>> snd-soc-omap3pandora.o
>> obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o
>> obj-$(CONFIG_SND_OMAP_SOC_ZOOM2) += snd-soc-zoom2.o
>> obj-$(CONFIG_SND_OMAP_SOC_IGEP0020) += snd-soc-igep0020.o
>> +obj-$(CONFIG_SND_OMAP_SOC_OMAP3_THUNDER) += snd-soc-omap3thunder.o
>> +
>> diff --git a/sound/soc/omap/omap3thunder.c b/sound/soc/omap/omap3thunder.c
>> new file mode 100644
>> index 0000000..cd91dff
>> --- /dev/null
>> +++ b/sound/soc/omap/omap3thunder.c
>> @@ -0,0 +1,160 @@
>> +/*
>> + * omap3 audio support for Technexion Thunder boards.
>> + * Modified from omap3beagle.c
>> + * Daniel Toussaint <daniel.toussa...@technexion.com>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but
>> + * WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>> + * General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
>> + * 02110-1301 USA
>> + *
>> + */
>> +
>> +
>> +#include <linux/clk.h>
>> +#include <linux/platform_device.h>
>> +#include <sound/core.h>
>> +#include <sound/pcm.h>
>> +#include <sound/soc.h>
>> +#include <sound/soc-dapm.h>
>> +
>> +#include <asm/mach-types.h>
>> +#include <plat/hardware.h>
>> +#include <plat/gpio.h>
>> +#include <plat/mcbsp.h>
>> +
>> +#include "omap-mcbsp.h"
>> +#include "omap-pcm.h"
>> +#include "../codecs/twl4030.h"
>> +
>> +static int omap3thunder_hw_params(struct snd_pcm_substream *substream,
>> + struct snd_pcm_hw_params *params)
>> +{
>> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
>> + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
>> + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
>> + unsigned int fmt;
>> + int ret;
>> +
>> + switch (params_channels(params)) {
>> + case 2: /* Stereo I2S mode */
>> + fmt = SND_SOC_DAIFMT_I2S |
>> + SND_SOC_DAIFMT_NB_NF |
>> + SND_SOC_DAIFMT_CBM_CFM;
>> + break;
>> + case 4: /* Four channel TDM mode */
>> + fmt = SND_SOC_DAIFMT_DSP_A |
>> + SND_SOC_DAIFMT_IB_NF |
>> + SND_SOC_DAIFMT_CBM_CFM;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + /* Set codec DAI configuration */
>> + ret = snd_soc_dai_set_fmt(codec_dai, fmt);
>> + if (ret < 0) {
>> + printk(KERN_ERR "can't set codec DAI configuration\n");
>> + return ret;
>> + }
>> +
>> + /* Set cpu DAI configuration */
>> + ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
>> + if (ret < 0) {
>> + printk(KERN_ERR "can't set cpu DAI configuration\n");
>> + return ret;
>> + }
>> +
>> + /* Set the codec system clock for DAC and ADC */
>> + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
>> + SND_SOC_CLOCK_IN);
>> + if (ret < 0) {
>> + printk(KERN_ERR "can't set codec system clock\n");
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static struct snd_soc_ops omap3thunder_ops = {
>> + .hw_params = omap3thunder_hw_params,
>> +};
>> +
>> +/* Digital audio interface glue - connects codec <--> CPU */
>> +static struct snd_soc_dai_link omap3thunder_dai = {
>> + .name = "TWL4030",
>> + .stream_name = "TWL4030",
>> + .cpu_dai = &omap_mcbsp_dai[0],
>> + .codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
>> + .ops = &omap3thunder_ops,
>> +};
>> +
>> +/* Audio machine driver */
>> +static struct snd_soc_card snd_soc_omap3thunder = {
>> + .name = "omap3thunder",
>> + .platform = &omap_soc_platform,
>> + .dai_link = &omap3thunder_dai,
>> + .num_links = 1,
>> +};
>> +
>> +/* Audio subsystem */
>> +static struct snd_soc_device omap3thunder_snd_devdata = {
>> + .card = &snd_soc_omap3thunder,
>> + .codec_dev = &soc_codec_dev_twl4030,
>> +};
>> +
>> +static struct platform_device *omap3thunder_snd_device;
>> +
>> +static int __init omap3thunder_soc_init(void)
>> +{
>> + int ret;
>> +
>> + if (!machine_is_omap3_thunder()) {
>> + pr_debug("Not OMAP3 thunder!\n");
>> + return -ENODEV;
>> + }
>> + pr_info("OMAP3 thunder SoC init\n");
>> +
>> + omap3thunder_snd_device = platform_device_alloc("soc-audio", -1);
>> + if (!omap3thunder_snd_device) {
>> + printk(KERN_ERR "Platform device allocation failed\n");
>> + return -ENOMEM;
>> + }
>> +
>> + platform_set_drvdata(omap3thunder_snd_device,
>> &omap3thunder_snd_devdata);
>> + omap3thunder_snd_devdata.dev = &omap3thunder_snd_device->dev;
>> + *(unsigned int *)omap3thunder_dai.cpu_dai->private_data = 1; /* McBSP2
>> */
>> +
>> + ret = platform_device_add(omap3thunder_snd_device);
>> + if (ret)
>> + goto err1;
>> +
>> + return 0;
>> +
>> +err1:
>> + printk(KERN_ERR "Unable to add platform device\n");
>> + platform_device_put(omap3thunder_snd_device);
>> +
>> + return ret;
>> +}
>> +
>> +static void __exit omap3thunder_soc_exit(void)
>> +{
>> + platform_device_unregister(omap3thunder_snd_device);
>> +}
>> +
>> +module_init(omap3thunder_soc_init);
>> +module_exit(omap3thunder_soc_exit);
>> +
>> +MODULE_AUTHOR("Steve Sakoman <st...@sakoman.com>");
>> +MODULE_DESCRIPTION("ALSA SoC OMAP3 thunder");
>> +MODULE_LICENSE("GPL");
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
