Paul Walmsley said the following on 12/18/2009 06:17 AM:
Move omap2_clk_init_cpufreq_table() to opp_init_cpufreq_table() in opp.c
where it now belongs. OMAP2 still needs to be converted to use the OPP layer,
so it is using the old code.
Neat.. thanks.. helps Omap4 too I can see..
Acked-by: Nishanth Menon <n...@ti.com>
---
arch/arm/mach-omap2/clock34xx.c | 55 +--------------------------------
arch/arm/plat-omap/cpu-omap.c | 6 +++-
arch/arm/plat-omap/include/plat/opp.h | 4 ++
arch/arm/plat-omap/opp.c | 46 ++++++++++++++++++++++++++++
4 files changed, 56 insertions(+), 55 deletions(-)
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index ba3dd70..6a40fb1 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -27,7 +27,6 @@
#include <linux/limits.h>
#include <linux/bitops.h>
#include <linux/err.h>
-#include <linux/cpufreq.h>
#include <plat/cpu.h>
#include <plat/clock.h>
@@ -257,56 +256,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned
long rate)
/* Common clock code */
-/*
- * As it is structured now, this will prevent an OMAP2/3 multiboot
- * kernel from compiling. This will need further attention.
- */
-#if defined(CONFIG_ARCH_OMAP3)
-
-#ifdef CONFIG_CPU_FREQ
-
-static struct cpufreq_frequency_table *freq_table;
-
-void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
- int i = 0;
- int opp_num;
- struct omap_opp *opp = mpu_opps;
- unsigned long freq = ULONG_MAX;
-
- if (!mpu_opps) {
- pr_warning("%s: failed to initialize frequency"
- "table\n", __func__);
- return;
- }
- opp_num = opp_get_opp_count(mpu_opps);
- if (opp_num < 0) {
- pr_err("%s: no opp table?\n", __func__);
- return;
- }
-
- freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) *
- (opp_num + 1), GFP_ATOMIC);
- if (!freq_table) {
- pr_warning("%s: failed to allocate frequency"
- "table\n", __func__);
- return;
- }
-
- while (!IS_ERR(opp = opp_find_freq_floor(opp, &freq))) {
- freq_table[i].index = i;
- freq_table[i].frequency = freq / 1000;
- i++;
- /* set the next benchmark to search */
- freq--;
- }
-
- freq_table[i].index = i;
- freq_table[i].frequency = CPUFREQ_TABLE_END;
-
- *table = &freq_table[0];
-}
-#endif
+#ifdef CONFIG_ARCH_OMAP3
struct clk_functions omap2_clk_functions = {
.clk_enable = omap2_clk_enable,
@@ -315,9 +265,6 @@ struct clk_functions omap2_clk_functions = {
.clk_set_rate = omap2_clk_set_rate,
.clk_set_parent = omap2_clk_set_parent,
.clk_disable_unused = omap2_clk_disable_unused,
-#ifdef CONFIG_CPU_FREQ
- .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
-#endif
};
/*
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index a2b5ee4..723834e 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -132,7 +132,11 @@ static int __init omap_cpu_init(struct cpufreq_policy
*policy)
policy->cur = policy->min = policy->max = omap_getspeed(0);
- clk_init_cpufreq_table(&freq_table);
+ if (!cpu_is_omap34xx())
+ clk_init_cpufreq_table(&freq_table);
+ else
+ opp_init_cpufreq_table(mpu_opps, &freq_table);
+
if (freq_table) {
result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
if (!result)
diff --git a/arch/arm/plat-omap/include/plat/opp.h
b/arch/arm/plat-omap/include/plat/opp.h
index b00f7f9..91b0aa6 100644
--- a/arch/arm/plat-omap/include/plat/opp.h
+++ b/arch/arm/plat-omap/include/plat/opp.h
@@ -240,4 +240,8 @@ int opp_disable(struct omap_opp *opp);
struct omap_opp * __deprecated opp_find_by_opp_id(struct omap_opp *opps,
u8 opp_id);
+void opp_init_cpufreq_table(struct omap_opp *opps,
+ struct cpufreq_frequency_table **table);
+
+
#endif /* __ASM_ARM_OMAP_OPP_H */
diff --git a/arch/arm/plat-omap/opp.c b/arch/arm/plat-omap/opp.c
index 8bdad43..aaafc10 100644
--- a/arch/arm/plat-omap/opp.c
+++ b/arch/arm/plat-omap/opp.c
@@ -14,6 +14,7 @@
#include <linux/err.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/cpufreq.h>
#include <plat/opp_twl_tps.h>
#include <plat/opp.h>
@@ -281,3 +282,48 @@ int opp_disable(struct omap_opp *opp)
opp->enabled = false;
return 0;
}
+
+/* XXX document */
+void opp_init_cpufreq_table(struct omap_opp *opps,
+ struct cpufreq_frequency_table **table)
+{
+ int i = 0;
+ int opp_num;
+ unsigned long freq = ULONG_MAX;
+ struct cpufreq_frequency_table *freq_table;
+
+ if (!opps) {
+ pr_warning("%s: failed to initialize frequency"
+ "table\n", __func__);
+ return;
+ }
+
+ opp_num = opp_get_opp_count(opps);
+ if (opp_num < 0) {
+ pr_err("%s: no opp table?\n", __func__);
+ return;
+ }
+
+ freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) *
+ (opp_num + 1), GFP_ATOMIC);
+ if (!freq_table) {
+ pr_warning("%s: failed to allocate frequency"
+ "table\n", __func__);
+ return;
+ }
+
+ while (!OPP_TERM(opps)) {
+ if (opps->enabled) {
+ freq_table[i].index = i;
+ freq_table[i].frequency = freq / 1000;
+ i++;
+ }
+
+ opps++;
+ }
+
+ freq_table[i].index = i;
+ freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+ *table = &freq_table[0];
+}
here is a future problem I see:
I think we need notifiers for opp_enable,disable and add -> this will
allow dynamic opp table modification allowing cpufreq changes accordingly.
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
