* Vimal Singh <vimal.neww...@gmail.com> [091223 01:32]:
> In omap nand driver we used to do 32-bit reads (in function
> omap_read_buf_pref, using 'ioread32_rep' i.e.: __raw_readsl), and it
> was working fine till some time back. But now, somehow, this has got
> some problem. Reads are not being done successfully, and driver gives
> lots for error reprot like below:
>
> td->read(0x604 bytes from 0x1fc) returned ECC error
> uncorrectable error :
> uncorrectable error :
> uncorrectable error :
> uncorrectable error :
> uncorrectable error :
> uncorrectable error :
> mtd->read(0x520 bytes from 0x2e0) returned ECC error
>
> While if we change 32-bit reads to 16-bit reads (using 'ioread16_rep'
> i.e.: __raw_readwl) makes it working fine. (A patch to do this is
> listed below at the bottom of this mail.)
>
> I have not seen any change in routine '__raw_readsl'.
> So, could someone help me find out the root cause the issue?
>
> Thanks for any input.
Maybe an issue with the GPMC timings?
Regards,
Tony
>
> --
> Regards,
> Vimal Singh
>
> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
> index aaef170..dc493f5 100644
> --- a/drivers/mtd/nand/omap2.c
> +++ b/drivers/mtd/nand/omap2.c
> @@ -288,14 +288,14 @@ static void omap_read_buf_pref(struct mtd_info
> struct omap_nand_info, mtd);
> uint32_t pfpw_status = 0, r_count = 0;
> int ret = 0;
> - u32 *p = (u32 *)buf;
> + u16 *p = (u16 *)buf;
>
> /* take care of subpage reads */
> - for (; len % 4 != 0; ) {
> + for (; len % 2 != 0; ) {
> *buf++ = __raw_readb(info->nand.IO_ADDR_R);
> len--;
> }
> - p = (u32 *) buf;
> + p = (u16 *) buf;
>
> /* configure and start prefetch transfer */
> ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
> @@ -308,10 +308,10 @@ static void omap_read_buf_pref(struct mtd_info
> *mtd, u_char *buf, int len)
> } else {
> do {
> pfpw_status = gpmc_prefetch_status();
> - r_count = ((pfpw_status >> 24) & 0x7F) >> 2;
> - ioread32_rep(info->nand_pref_fifo_add, p, r_count);
> + r_count = ((pfpw_status >> 24) & 0x7F) >> 1;
> + ioread16_rep(info->nand_pref_fifo_add, p, r_count);
> p += r_count;
> - len -= r_count << 2;
> + len -= r_count << 1;
> } while (len);
>
> /* disable and stop the PFPW engine */
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
