[PATCH 13/15] OMAP: DSS2: Make check-delay-loops consistent

[Tomi Valkeinen]

Loops checking for certain condition were rather inconsistent.

Signed-off-by: Tomi Valkeinen <tomi.valkei...@nokia.com>
Reported-by: Juha Leppanen <juha_motorsport...@luukku.com>
---
 drivers/video/omap2/dss/dsi.c |   14 +++++++-------
 drivers/video/omap2/dss/dss.c |    6 +++---
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 2881d93..d964869 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -828,12 +828,12 @@ static int dsi_pll_power(enum dsi_pll_power_state state)
 
        /* PLL_PWR_STATUS */
        while (FLD_GET(dsi_read_reg(DSI_CLK_CTRL), 29, 28) != state) {
-               udelay(1);
-               if (t++ > 1000) {
+               if (++t > 1000) {
                        DSSERR("Failed to set DSI PLL power mode to %d\n",
                                        state);
                        return -ENODEV;
                }
+               udelay(1);
        }
 
        return 0;
@@ -1441,12 +1441,12 @@ static int dsi_complexio_power(enum 
dsi_complexio_power_state state)
 
        /* PWR_STATUS */
        while (FLD_GET(dsi_read_reg(DSI_COMPLEXIO_CFG1), 26, 25) != state) {
-               udelay(1);
-               if (t++ > 1000) {
+               if (++t > 1000) {
                        DSSERR("failed to set complexio power state to "
                                        "%d\n", state);
                        return -ENODEV;
                }
+               udelay(1);
        }
 
        return 0;
@@ -1646,10 +1646,10 @@ static void dsi_complexio_uninit(void)
 
 static int _dsi_wait_reset(void)
 {
-       int i = 0;
+       int t = 0;
 
        while (REG_GET(DSI_SYSSTATUS, 0, 0) == 0) {
-               if (i++ > 5) {
+               if (++t > 5) {
                        DSSERR("soft reset failed\n");
                        return -ENODEV;
                }
@@ -2707,7 +2707,6 @@ static int dsi_update_screen_l4(struct omap_dss_device 
*dssdev,
                /* using fifo not empty */
                /* TX_FIFO_NOT_EMPTY */
                while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) {
-                       udelay(1);
                        fifo_stalls++;
                        if (fifo_stalls > 0xfffff) {
                                DSSERR("fifo stalls overflow, pixels left %d\n",
@@ -2715,6 +2714,7 @@ static int dsi_update_screen_l4(struct omap_dss_device 
*dssdev,
                                dsi_if_enable(0);
                                return -EIO;
                        }
+                       udelay(1);
                }
 #elif 1
                /* using fifo emptiness */
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 9b05ee6..0a26b7d 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -467,14 +467,14 @@ static irqreturn_t dss_irq_handler_omap3(int irq, void 
*arg)
 
 static int _omap_dss_wait_reset(void)
 {
-       unsigned timeout = 1000;
+       int t = 0;
 
        while (REG_GET(DSS_SYSSTATUS, 0, 0) == 0) {
-               udelay(1);
-               if (!--timeout) {
+               if (++t > 1000) {
                        DSSERR("soft reset failed\n");
                        return -ENODEV;
                }
+               udelay(1);
        }
 
        return 0;
-- 
1.6.5

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html