Hi Here are some changes we need for omap_hsmmc. They are dependent on OMAP board files so it would be simplest if the patches all went via the OMAP tree.
This is version 2 of this patch set. Thank you Tony, Paul and Madhu for your comments. Changes from version 1: - amended patch 'omap_hsmmc: Move gpio and regulator control from board file' so that system control functions remain in the board file - for clarity, split patch 'omap: Rename mmc-twl4030 to hsmmc' into 'omap: Rename mmc-twl4030 files to hsmmc' and 'omap: Rename hsmmc symbols to reflect independence from twl4030' - removed patch 'omap_hsmmc: set DVFS/PM constraints' - added patch 'omap: Add functions for dynamic remuxing of pins' - renamed and reworked patch 'omap: RX51: Remux to pull eMMC lines down when powering off' (was 'omap_hsmmc: RX51: set padconfs to pull down when powering off eMMC') - added patch 'omap_hsmmc: Ensure regulator enable / disable are paired' - fixed mistakes in patch 'omap_hsmmc: Allow for a shared VccQ' Adrian Hunter (9): omap_hsmmc: Move gpio and regulator control from board file omap: Rename mmc-twl4030 files to hsmmc omap: Rename hsmmc symbols to reflect independence from twl4030 omap: Reconnect hsmmc context loss count omap: RX51: Remux to pull eMMC lines down when powering off omap_hsmmc: Allow for power saving without going off omap_hsmmc: Fix disable timeouts omap_hsmmc: Ensure regulator enable / disable are paired omap_hsmmc: Allow for a shared VccQ Tony Lindgren (1): omap: Add functions for dynamic remuxing of pins arch/arm/configs/rx51_defconfig | 4 +- arch/arm/mach-omap2/Makefile | 28 +- arch/arm/mach-omap2/board-2430sdp.c | 6 +- arch/arm/mach-omap2/board-3430sdp.c | 6 +- arch/arm/mach-omap2/board-cm-t35.c | 6 +- arch/arm/mach-omap2/board-igep0020.c | 6 +- arch/arm/mach-omap2/board-ldp.c | 6 +- arch/arm/mach-omap2/board-omap3beagle.c | 6 +- arch/arm/mach-omap2/board-omap3evm.c | 6 +- arch/arm/mach-omap2/board-omap3pandora.c | 6 +- arch/arm/mach-omap2/board-omap3touchbook.c | 6 +- arch/arm/mach-omap2/board-overo.c | 6 +- arch/arm/mach-omap2/board-rx51-peripherals.c | 63 +++- arch/arm/mach-omap2/board-zoom-peripherals.c | 6 +- arch/arm/mach-omap2/hsmmc.c | 261 ++++++++++++ arch/arm/mach-omap2/{mmc-twl4030.h => hsmmc.h} | 14 +- arch/arm/mach-omap2/mmc-twl4030.c | 537 ------------------------ arch/arm/mach-omap2/mux.c | 22 +- arch/arm/mach-omap2/mux.h | 24 + arch/arm/plat-omap/include/plat/mmc.h | 35 ++- drivers/mmc/host/omap_hsmmc.c | 375 ++++++++++++++++- 21 files changed, 788 insertions(+), 641 deletions(-) create mode 100644 arch/arm/mach-omap2/hsmmc.c rename arch/arm/mach-omap2/{mmc-twl4030.h => hsmmc.h} (63%) delete mode 100644 arch/arm/mach-omap2/mmc-twl4030.c Regards Adrian -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html