> -----Original Message----- > From: Adrian Hunter [mailto:adrian.hun...@nokia.com] > Sent: Saturday, January 16, 2010 7:33 PM > To: Tony Lindgren > Cc: Adrian Hunter; Madhusudhan Chikkature; Paul Walmsley; linux-omap > Mailing List; linux-mmc Mailing List; Andrew Morton > Subject: [PATCH V2 0/10] omap_hsmmc changes V2 > > Hi > > Here are some changes we need for omap_hsmmc. They are dependent on OMAP > board files so it would be simplest if the patches all went via the OMAP > tree. > > This is version 2 of this patch set. Thank you Tony, Paul and Madhu for > your comments. > > Changes from version 1: > - amended patch 'omap_hsmmc: Move gpio and regulator control from > board file' so that system control functions remain in the board > file > - for clarity, split patch 'omap: Rename mmc-twl4030 to hsmmc' into > 'omap: Rename mmc-twl4030 files to hsmmc' and > 'omap: Rename hsmmc symbols to reflect independence from twl4030' > - removed patch 'omap_hsmmc: set DVFS/PM constraints' > - added patch 'omap: Add functions for dynamic remuxing of pins' > - renamed and reworked patch 'omap: RX51: Remux to pull eMMC lines > down when powering off' (was 'omap_hsmmc: RX51: set padconfs to pull > down when powering off eMMC') > - added patch 'omap_hsmmc: Ensure regulator enable / disable are > paired' > - fixed mistakes in patch 'omap_hsmmc: Allow for a shared VccQ' > Reviewed the omap_hsmmc changes and did a sanity test on Zoom2. Acked-by: Madhusudhan Chikkature <madhu...@ti.com>
Regards, Madhu > > Adrian Hunter (9): > omap_hsmmc: Move gpio and regulator control from board file > omap: Rename mmc-twl4030 files to hsmmc > omap: Rename hsmmc symbols to reflect independence from twl4030 > omap: Reconnect hsmmc context loss count > omap: RX51: Remux to pull eMMC lines down when powering off > omap_hsmmc: Allow for power saving without going off > omap_hsmmc: Fix disable timeouts > omap_hsmmc: Ensure regulator enable / disable are paired > omap_hsmmc: Allow for a shared VccQ > > Tony Lindgren (1): > omap: Add functions for dynamic remuxing of pins > > arch/arm/configs/rx51_defconfig | 4 +- > arch/arm/mach-omap2/Makefile | 28 +- > arch/arm/mach-omap2/board-2430sdp.c | 6 +- > arch/arm/mach-omap2/board-3430sdp.c | 6 +- > arch/arm/mach-omap2/board-cm-t35.c | 6 +- > arch/arm/mach-omap2/board-igep0020.c | 6 +- > arch/arm/mach-omap2/board-ldp.c | 6 +- > arch/arm/mach-omap2/board-omap3beagle.c | 6 +- > arch/arm/mach-omap2/board-omap3evm.c | 6 +- > arch/arm/mach-omap2/board-omap3pandora.c | 6 +- > arch/arm/mach-omap2/board-omap3touchbook.c | 6 +- > arch/arm/mach-omap2/board-overo.c | 6 +- > arch/arm/mach-omap2/board-rx51-peripherals.c | 63 +++- > arch/arm/mach-omap2/board-zoom-peripherals.c | 6 +- > arch/arm/mach-omap2/hsmmc.c | 261 ++++++++++++ > arch/arm/mach-omap2/{mmc-twl4030.h => hsmmc.h} | 14 +- > arch/arm/mach-omap2/mmc-twl4030.c | 537 ------------------- > ----- > arch/arm/mach-omap2/mux.c | 22 +- > arch/arm/mach-omap2/mux.h | 24 + > arch/arm/plat-omap/include/plat/mmc.h | 35 ++- > drivers/mmc/host/omap_hsmmc.c | 375 ++++++++++++++++- > 21 files changed, 788 insertions(+), 641 deletions(-) > create mode 100644 arch/arm/mach-omap2/hsmmc.c > rename arch/arm/mach-omap2/{mmc-twl4030.h => hsmmc.h} (63%) > delete mode 100644 arch/arm/mach-omap2/mmc-twl4030.c > > > > Regards > Adrian -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html