From: Tero Kristo <tero.kri...@nokia.com>

Following hacks will be moved inside cpuidle in subsequent patch:

- CAM domain prevents idle completely
- PER should not go OFF if core remains active

This simplifies the design and allows cpuidle to keep better track of which
power states system will actually enter.

Signed-off-by: Tero Kristo <tero.kri...@nokia.com>
---
 arch/arm/mach-omap2/pm34xx.c |   18 ++----------------
 1 files changed, 2 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index dceb18f..f7bb5c7 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -93,7 +93,6 @@ static int (*_omap_save_secure_sram)(u32 *addr);
 
 static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
 static struct powerdomain *core_pwrdm, *per_pwrdm;
-static struct powerdomain *cam_pwrdm;
 
 static struct prm_setup_vc prm_setup = {
        .clksetup = 0xff,
@@ -373,7 +372,6 @@ void omap_sram_idle(void)
        int core_next_state = PWRDM_POWER_ON;
        int core_prev_state, per_prev_state;
        u32 sdrc_pwr = 0;
-       int per_state_modified = 0;
 
        if (!_omap_sram_idle)
                return;
@@ -411,20 +409,11 @@ void omap_sram_idle(void)
        core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
        if (per_next_state < PWRDM_POWER_ON) {
                omap2_gpio_prepare_for_idle(per_next_state);
-               if (per_next_state == PWRDM_POWER_OFF) {
-                       if (core_next_state == PWRDM_POWER_ON) {
-                               per_next_state = PWRDM_POWER_RET;
-                               pwrdm_set_next_pwrst(per_pwrdm, per_next_state);
-                               per_state_modified = 1;
-                       } else
-                               omap3_per_save_context();
-               }
+               if (per_next_state == PWRDM_POWER_OFF)
+                       omap3_per_save_context();
                omap_uart_prepare_idle(2);
        }
 
-       if (pwrdm_read_pwrst(cam_pwrdm) == PWRDM_POWER_ON)
-               omap2_clkdm_deny_idle(mpu_pwrdm->pwrdm_clkdms[0]);
-
        /*
         * Disable smartreflex before entering WFI.
         * Only needed if we are going to enter retention or off.
@@ -554,8 +543,6 @@ void omap_sram_idle(void)
                }
                omap2_gpio_resume_after_idle();
                omap_uart_resume_idle(2);
-               if (per_state_modified)
-                       pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF);
        }
 
        /* Disable IO-PAD and IO-CHAIN wakeup */
@@ -1175,7 +1162,6 @@ static int __init omap3_pm_init(void)
        neon_pwrdm = pwrdm_lookup("neon_pwrdm");
        per_pwrdm = pwrdm_lookup("per_pwrdm");
        core_pwrdm = pwrdm_lookup("core_pwrdm");
-       cam_pwrdm = pwrdm_lookup("cam_pwrdm");
 
        omap_push_sram_idle();
 #ifdef CONFIG_SUSPEND
-- 
1.5.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to