Tony Lindgren <t...@atomide.com> writes:
> * Tony Lindgren <t...@atomide.com> [100202 18:23]:
>> Currently the omap serial clocks are autoidled after 5 seconds.
>> However, this causes lost characters on the serial ports. As this
>> is considered non-standard behaviour for Linux, disable the timeout.
>>
>> Note that this will also cause blocking of any deeper omap sleep
>> states.
>>
>> To enable the autoidling of the serial ports, do something like
>> this for each serial port:
>>
>> # echo 5 > /sys/devices/platform/serial8250.0/sleep_timeout
>> # echo 5 > /sys/devices/platform/serial8250.1/sleep_timeout
>> ...
>
> Turns out we also need to disable the timer in init, otherwise
> the very first character after boot can get corrupt.
>
> Updated version below, Kevin can you take one more look and see
> if your S-O-B is still valid? :)
Yeah, looks right. s-o-b still valid.
Kevin
> Regards,
>
> Tony
> From ff7ce25ec59223bf987ad209c1eb183031811c07 Mon Sep 17 00:00:00 2001
> From: Tony Lindgren <t...@atomide.com>
> Date: Mon, 1 Feb 2010 12:34:31 -0800
> Subject: [PATCH] omap: Disable serial port autoidle by default
>
> Currently the omap serial clocks are autoidled after 5 seconds.
> However, this causes lost characters on the serial ports. As this
> is considered non-standard behaviour for Linux, disable the timeout.
>
> Note that this will also cause blocking of any deeper omap sleep
> states.
>
> To enable the autoidling of the serial ports, do something like
> this for each serial port:
>
> # echo 5 > /sys/devices/platform/serial8250.0/sleep_timeout
> # echo 5 > /sys/devices/platform/serial8250.1/sleep_timeout
> ...
>
> Signed-off-by: Kevin Hilman <khil...@deeprootsystems.com>
> Signed-off-by: Tony Lindgren <t...@atomide.com>
>
> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
> index 8c964be..e10a02d 100644
> --- a/arch/arm/mach-omap2/serial.c
> +++ b/arch/arm/mach-omap2/serial.c
> @@ -36,7 +36,13 @@
> #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52
> #define UART_OMAP_WER 0x17 /* Wake-up enable register */
>
> -#define DEFAULT_TIMEOUT (5 * HZ)
> +/*
> + * NOTE: By default the serial timeout is disabled as it causes lost
> characters
> + * over the serial ports. This means that the UART clocks will stay on until
> + * disabled via sysfs. This also causes that any deeper omap sleep states are
> + * blocked.
> + */
> +#define DEFAULT_TIMEOUT 0
>
> struct omap_uart_state {
> int num;
> @@ -422,7 +428,8 @@ static void omap_uart_idle_init(struct omap_uart_state
> *uart)
> uart->timeout = DEFAULT_TIMEOUT;
> setup_timer(&uart->timer, omap_uart_idle_timer,
> (unsigned long) uart);
> - mod_timer(&uart->timer, jiffies + uart->timeout);
> + if (uart->timeout)
> + mod_timer(&uart->timer, jiffies + uart->timeout);
> omap_uart_smart_idle_enable(uart, 0);
>
> if (cpu_is_omap34xx()) {
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
