Bye the way just to add bit more clarity, this patch addresses TX hardware restriction in the new UART IP used on omap3630 and omap4430. First part of the fix for RX is already in mainline, Commit: "ce13d4716a276f4331d78ba28a5093a63822ab95"
More details on this thread are here. http://www.mail-archive.com/linux-omap@vger.kernel.org/msg19447.html > -----Original Message----- > From: Shilimkar, Santosh > Sent: Thursday, February 18, 2010 2:29 PM > To: t...@atomide.com > Cc: linux-omap@vger.kernel.org; linux-arm-ker...@lists.infradead.org; > Shilimkar, Santosh; Woodruff, > Richard; Ghorai, Sukumar > Subject: [PATCH 1/9] omap3/4: uart: fix full-fifo write abort > > This patch is addition to the already merged commit on non-empty > uart fifo read abort. "ce13d4716a276f4331d78ba28a5093a63822ab95" > > OMAP3630 and OMAP4430 UART IP blocks have a restriction on TX FIFO > too. If you try to write to the tx fifo when it is full, the system aborts. > > This can be easily reproducible by not suppressing interconnect errors or > long duration testing where continuous prints over console from multiple > threads. This patch is addressing the issue by ensuring that write is > not issued while fifo is full. A timeout is added to avoid any hang > on fifo-full for 10 mS which is unlikely case. > > Patch is validated on OMAP3630 and OMAP4 SDP. > > V2 version removed the additional 1 uS on every TX as per > Tony's suggestion > > Signed-off-by: Woodruff Richard <r-woodru...@ti.com> > Signed-off-by: Santosh Shilimkar <santosh.shilim...@ti.com> > CC: Ghorai Sukumar <s-gho...@ti.com> > --- > arch/arm/mach-omap2/serial.c | 31 ++++++++++++++++++++++++++++--- > 1 files changed, 28 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c > index 5f3035e..b79bc89 100644 > --- a/arch/arm/mach-omap2/serial.c > +++ b/arch/arm/mach-omap2/serial.c > @@ -23,6 +23,7 @@ > #include <linux/serial_reg.h> > #include <linux/clk.h> > #include <linux/io.h> > +#include <linux/delay.h> > > #include <plat/common.h> > #include <plat/board.h> > @@ -160,6 +161,13 @@ static inline unsigned int serial_read_reg(struct > plat_serial8250_port *up, > return (unsigned int)__raw_readb(up->membase + offset); > } > > +static inline void __serial_write_reg(struct uart_port *up, int offset, > + int value) > +{ > + offset <<= up->regshift; > + __raw_writeb(value, up->membase + offset); > +} > + > static inline void serial_write_reg(struct plat_serial8250_port *p, int > offset, > int value) > { > @@ -620,6 +628,20 @@ static unsigned int serial_in_override(struct uart_port > *up, int offset) > return __serial_read_reg(up, offset); > } > > +static void serial_out_override(struct uart_port *up, int offset, int value) > +{ > + unsigned int status, tmout = 10000; > + > + status = __serial_read_reg(up, UART_LSR); > + while (!(status & UART_LSR_THRE)) { > + /* Wait up to 10ms for the character(s) to be sent. */ > + if (--tmout == 0) > + break; > + udelay(1); > + status = __serial_read_reg(up, UART_LSR); > + } > + __serial_write_reg(up, offset, value); > +} > void __init omap_serial_early_init(void) > { > int i; > @@ -721,11 +743,14 @@ void __init omap_serial_init_port(int port) > * omap3xxx: Never read empty UART fifo on UARTs > * with IP rev >=0x52 > */ > - if (cpu_is_omap44xx()) > + if (cpu_is_omap44xx()) { > uart->p->serial_in = serial_in_override; > - else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF) > - >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) > + uart->p->serial_out = serial_out_override; > + } else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF) > + >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) { > uart->p->serial_in = serial_in_override; > + uart->p->serial_out = serial_out_override; > + } > } > > /** > -- > 1.6.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
