Subject: [PATCH/RFC] OMAP2: serial.c: Fix number of uarts in early_init

The omap_serial_early_init prints the following errors:

Could not get uart4_ick
Could not get uart4_fck

because all the uarts available in omap_uart[] will be initialized.
Only omap4430 and omap3630 have 4 uarts at the moment.
This patch reduces the number of uarts when cpu is not omap4430 or
omap3630.

Signed-off-by: Thomas Weber <we...@corscience.de>
---
 arch/arm/mach-omap2/serial.c |   15 ++++++++++-----
 1 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index b79bc89..da77930 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -644,16 +644,21 @@ static void serial_out_override(struct uart_port *up, int 
offset, int value)
 }
 void __init omap_serial_early_init(void)
 {
-       int i;
+       int i, nr_ports;
        char name[16];
 
+       if (!(cpu_is_omap3630() || cpu_is_omap4430()))
+               nr_ports = 3;
+       else
+               nr_ports = ARRAY_SIZE(omap_uart);
+
        /*
         * Make sure the serial ports are muxed on at this point.
         * You have to mux them off in device drivers later on
         * if not needed.
         */
 
-       for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
+       for (i = 0; i < nr_ports; i++) {
                struct omap_uart_state *uart = &omap_uart[i];
                struct platform_device *pdev = &uart->pdev;
                struct device *dev = &pdev->dev;
@@ -669,17 +674,17 @@ void __init omap_serial_early_init(void)
                        continue;
                }
 
-               sprintf(name, "uart%d_ick", i+1);
+               sprintf(name, "uart%d_ick", i + 1);
                uart->ick = clk_get(NULL, name);
                if (IS_ERR(uart->ick)) {
-                       printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
+                       printk(KERN_ERR "Could not get uart%d_ick\n", i + 1);
                        uart->ick = NULL;
                }
 
                sprintf(name, "uart%d_fck", i+1);
                uart->fck = clk_get(NULL, name);
                if (IS_ERR(uart->fck)) {
-                       printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
+                       printk(KERN_ERR "Could not get uart%d_fck\n", i + 1);
                        uart->fck = NULL;
                }
 
-- 
1.6.4.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to