Tero Kristo <tero.kri...@nokia.com> writes: > From: Tero Kristo <tero.kri...@nokia.com> > > Following hacks will be moved inside cpuidle in subsequent patch: > > - CAM domain prevents idle completely > - PER should not go OFF if core remains active > > This simplifies the design and allows cpuidle to keep better track of which > power states system will actually enter. > > Signed-off-by: Tero Kristo <tero.kri...@nokia.com>
I think this should be combined with PATCH 7. IOW, the removal and re-addition should be in the same patch. Kevin > --- > arch/arm/mach-omap2/pm34xx.c | 19 ++----------------- > 1 files changed, 2 insertions(+), 17 deletions(-) > > diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c > index c2d80fc..cdbedcf 100644 > --- a/arch/arm/mach-omap2/pm34xx.c > +++ b/arch/arm/mach-omap2/pm34xx.c > @@ -93,7 +93,6 @@ static int (*_omap_save_secure_sram)(u32 *addr); > > static struct powerdomain *mpu_pwrdm, *neon_pwrdm; > static struct powerdomain *core_pwrdm, *per_pwrdm; > -static struct powerdomain *cam_pwrdm; > > static struct prm_setup_vc prm_setup = { > .clksetup = 0xff, > @@ -373,7 +372,6 @@ void omap_sram_idle(void) > int core_next_state = PWRDM_POWER_ON; > int core_prev_state, per_prev_state; > u32 sdrc_pwr = 0; > - int per_state_modified = 0; > > if (!_omap_sram_idle) > return; > @@ -411,20 +409,11 @@ void omap_sram_idle(void) > core_next_state = omap3_pwrdm_read_next_pwrst(core_pwrdm); > if (per_next_state < PWRDM_POWER_ON) { > omap2_gpio_prepare_for_idle(per_next_state); > - if (per_next_state == PWRDM_POWER_OFF) { > - if (core_next_state == PWRDM_POWER_ON) { > - per_next_state = PWRDM_POWER_RET; > - pwrdm_set_next_pwrst(per_pwrdm, per_next_state); > - per_state_modified = 1; > - } else > - omap3_per_save_context(); > - } > + if (per_next_state == PWRDM_POWER_OFF) > + omap3_per_save_context(); > omap_uart_prepare_idle(2); > } > > - if (pwrdm_read_pwrst(cam_pwrdm) == PWRDM_POWER_ON) > - omap2_clkdm_deny_idle(mpu_pwrdm->pwrdm_clkdms[0]); > - > /* > * Disable smartreflex before entering WFI. > * Only needed if we are going to enter retention or off. > @@ -554,8 +543,6 @@ void omap_sram_idle(void) > } > omap2_gpio_resume_after_idle(); > omap_uart_resume_idle(2); > - if (per_state_modified) > - pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF); > } > > /* Disable IO-PAD and IO-CHAIN wakeup */ > @@ -564,7 +551,6 @@ void omap_sram_idle(void) > omap3_disable_io_chain(); > } > > - > pwrdm_post_transition(); > } > > @@ -1239,7 +1225,6 @@ static int __init omap3_pm_init(void) > neon_pwrdm = pwrdm_lookup("neon_pwrdm"); > per_pwrdm = pwrdm_lookup("per_pwrdm"); > core_pwrdm = pwrdm_lookup("core_pwrdm"); > - cam_pwrdm = pwrdm_lookup("cam_pwrdm"); > > neon_clkdm = clkdm_lookup("neon_clkdm"); > mpu_clkdm = clkdm_lookup("mpu_clkdm"); > -- > 1.5.4.3 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html