* G, Manjunath Kondaiah <manj...@ti.com> [100301 22:24]: > > > > > > > > + up->uart_dma.prev_rx_dma_pos = > > up->uart_dma.rx_buf_dma_phys; > > > > > + if (cpu_is_omap44xx()) > > > > > + omap_writel(0, OMAP44XX_DMA4_BASE > > > > > + + > > OMAP_DMA4_CDAC(up->uart_dma.rx_dma_channel)); > > > > > + else > > > > > + omap_writel(0, OMAP34XX_DMA4_BASE > > > > > + + > > OMAP_DMA4_CDAC(up->uart_dma.rx_dma_channel)); > > > > > > > > NAK. Please don't use omap_read/write for for new code. And do not > > > > tinker with the omap hardware registers directly in the driver. > > > > > > > > This needs to be done properly in > > arch/arm/plat-omap/dma.c instead. > > > > > > Thanks for the suggestion. > > > > > > Currently, dma_read/dma_write are #define's in dma.c which > > cannot be > > > accessed outside dma.c. I don't see any API's in dma.c for > > setting required > > > value for this register? > > > > Hmm isn't this the same as omap_get_dma_dst_pos(int lch)? If you're > > trying do something that's not in dma.c, we can add a new function > > for it. > > The omap_get_dma_dst_pos(int lch) is for read operation in CDAC register. > But, We need to write required value into CDAC register. For this, I propose: > > omap_set_dma_dst_pos(int lch, int value) which does not exist in current dma > driver.
OK, it that's needed. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
