Removing the common supplies and regulator init data structs for various
OMAP3 platforms and referring them from the twl4030 common file.
Signed-off-by: Anuj Aggarwal <anuj.aggar...@ti.com>
---
arch/arm/mach-omap2/board-3430sdp.c | 135 ++-----------------------
arch/arm/mach-omap2/board-cm-t35.c | 47 +--------
arch/arm/mach-omap2/board-igep0020.c | 24 +----
arch/arm/mach-omap2/board-ldp.c | 24 +----
arch/arm/mach-omap2/board-omap3beagle.c | 47 +--------
arch/arm/mach-omap2/board-omap3evm.c | 47 +--------
arch/arm/mach-omap2/board-omap3touchbook.c | 47 +--------
arch/arm/mach-omap2/board-overo.c | 23 +----
arch/arm/mach-omap2/board-zoom-peripherals.c | 71 ++------------
9 files changed, 47 insertions(+), 418 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c
b/arch/arm/mach-omap2/board-3430sdp.c
index f312b15..e414371 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -47,6 +47,7 @@
#include "sdram-qimonda-hyb18m512160af-6.h"
#include "hsmmc.h"
#include "pm.h"
+#include "twl4030-pmic.h"
#define CONFIG_DISABLE_HFCLK 1
@@ -365,18 +366,6 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
-static struct regulator_consumer_supply sdp3430_vmmc1_supply = {
- .supply = "vmmc",
-};
-
-static struct regulator_consumer_supply sdp3430_vsim_supply = {
- .supply = "vmmc_aux",
-};
-
-static struct regulator_consumer_supply sdp3430_vmmc2_supply = {
- .supply = "vmmc",
-};
-
static int sdp3430_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
@@ -390,9 +379,9 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
/* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
*/
- sdp3430_vmmc1_supply.dev = mmc[0].dev;
- sdp3430_vsim_supply.dev = mmc[0].dev;
- sdp3430_vmmc2_supply.dev = mmc[1].dev;
+ twl4030_vmmc1_supply.dev = mmc[0].dev;
+ twl4030_vsim_supply.dev = mmc[0].dev;
+ twl4030_vmmc2_supply.dev = mmc[1].dev;
/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
gpio_request(gpio + 7, "sub_lcd_en_bkl");
@@ -422,108 +411,6 @@ static struct twl4030_madc_platform_data
sdp3430_madc_data = {
.irq_line = 1,
};
-/*
- * Apply all the fixed voltages since most versions of U-Boot
- * don't bother with that initialization.
- */
-
-/* VAUX1 for mainboard (irda and sub-lcd) */
-static struct regulator_init_data sdp3430_vaux1 = {
- .constraints = {
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-/* VAUX2 for camera module */
-static struct regulator_init_data sdp3430_vaux2 = {
- .constraints = {
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-/* VAUX3 for LCD board */
-static struct regulator_init_data sdp3430_vaux3 = {
- .constraints = {
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-/* VAUX4 for OMAP VDD_CSI2 (camera) */
-static struct regulator_init_data sdp3430_vaux4 = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data sdp3430_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &sdp3430_vmmc1_supply,
-};
-
-/* VMMC2 for MMC2 card */
-static struct regulator_init_data sdp3430_vmmc2 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 1850000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &sdp3430_vmmc2_supply,
-};
-
-/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data sdp3430_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &sdp3430_vsim_supply,
-};
-
/* VDAC for DSS driving S-Video */
static struct regulator_init_data sdp3430_vdac = {
.constraints = {
@@ -587,13 +474,13 @@ static struct twl4030_platform_data sdp3430_twldata = {
.usb = &sdp3430_usb_data,
.codec = &sdp3430_codec,
- .vaux1 = &sdp3430_vaux1,
- .vaux2 = &sdp3430_vaux2,
- .vaux3 = &sdp3430_vaux3,
- .vaux4 = &sdp3430_vaux4,
- .vmmc1 = &sdp3430_vmmc1,
- .vmmc2 = &sdp3430_vmmc2,
- .vsim = &sdp3430_vsim,
+ .vaux1 = &twl4030_vaux1_data,
+ .vaux2 = &twl4030_vaux2_data,
+ .vaux3 = &twl4030_vaux3_data,
+ .vaux4 = &twl4030_vaux4_data,
+ .vmmc1 = &twl4030_vmmc1_data,
+ .vmmc2 = &twl4030_vmmc2_data,
+ .vsim = &twl4030_vsim_data,
.vdac = &sdp3430_vdac,
.vpll2 = &sdp3430_vpll2,
};
diff --git a/arch/arm/mach-omap2/board-cm-t35.c
b/arch/arm/mach-omap2/board-cm-t35.c
index afa77ca..051c931 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -51,6 +51,7 @@
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
+#include "twl4030-pmic.h"
#define CM_T35_GPIO_PENDOWN 57
@@ -494,14 +495,6 @@ out:
return;
}
-static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
- .supply = "vmmc",
-};
-
-static struct regulator_consumer_supply cm_t35_vsim_supply = {
- .supply = "vmmc_aux",
-};
-
static struct regulator_consumer_supply cm_t35_vdac_supply = {
.supply = "vdda_dac",
.dev = &cm_t35_dss_device.dev,
@@ -512,36 +505,6 @@ static struct regulator_consumer_supply cm_t35_vdvi_supply
= {
.dev = &cm_t35_dss_device.dev,
};
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data cm_t35_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &cm_t35_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data cm_t35_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &cm_t35_vsim_supply,
-};
-
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data cm_t35_vdac = {
.constraints = {
@@ -645,8 +608,8 @@ static int cm_t35_twl_gpio_setup(struct device *dev,
unsigned gpio,
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
- cm_t35_vmmc1_supply.dev = mmc[0].dev;
- cm_t35_vsim_supply.dev = mmc[0].dev;
+ twl4030_vmmc1_supply.dev = mmc[0].dev;
+ twl4030_vsim_supply.dev = mmc[0].dev;
/* setup USB with proper PHY reset GPIOs */
ehci_pdata.reset_gpio_port[0] = gpio + 6;
@@ -672,8 +635,8 @@ static struct twl4030_platform_data cm_t35_twldata = {
.keypad = &cm_t35_kp_data,
.usb = &cm_t35_usb_data,
.gpio = &cm_t35_gpio_data,
- .vmmc1 = &cm_t35_vmmc1,
- .vsim = &cm_t35_vsim,
+ .vmmc1 = &twl4030_vmmc1_data,
+ .vsim = &twl4030_vsim_data,
.vdac = &cm_t35_vdac,
.vpll2 = &cm_t35_vpll2,
};
diff --git a/arch/arm/mach-omap2/board-igep0020.c
b/arch/arm/mach-omap2/board-igep0020.c
index 9958987..514697c 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -35,6 +35,7 @@
#include "mux.h"
#include "hsmmc.h"
#include "sdram-numonyx-m65kxxxxam.h"
+#include "twl4030-pmic.h"
#define IGEP2_SMSC911X_CS 5
#define IGEP2_SMSC911X_GPIO 176
@@ -208,29 +209,10 @@ static inline void __init igep2_init_smsc911x(void) { }
static struct omap_board_config_kernel igep2_config[] __initdata = {
};
-static struct regulator_consumer_supply igep2_vmmc1_supply = {
- .supply = "vmmc",
-};
-
static struct regulator_consumer_supply igep2_vmmc2_supply = {
.supply = "vmmc",
};
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data igep2_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &igep2_vmmc1_supply,
-};
-
/* VMMC2 for OMAP VDD_MMC2 (i/o) and MMC2 WIFI */
static struct regulator_init_data igep2_vmmc2 = {
.constraints = {
@@ -272,7 +254,7 @@ static int igep2_twl_gpio_setup(struct device *dev,
/* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
*/
- igep2_vmmc1_supply.dev = mmc[0].dev;
+ twl4030_vmmc1_supply.dev = mmc[0].dev;
igep2_vmmc2_supply.dev = mmc[1].dev;
return 0;
@@ -411,7 +393,7 @@ static struct twl4030_platform_data igep2_twldata = {
.usb = &igep2_usb_data,
.codec = &igep2_codec_data,
.gpio = &igep2_gpio_data,
- .vmmc1 = &igep2_vmmc1,
+ .vmmc1 = &twl4030_vmmc1_data,
.vmmc2 = &igep2_vmmc2,
.vpll2 = &igep2_vpll2,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 5fcb52e..ed0154e 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -45,6 +45,7 @@
#include "mux.h"
#include "hsmmc.h"
+#include "twl4030-pmic.h"
#define LDP_SMSC911X_CS 1
#define LDP_SMSC911X_GPIO 152
@@ -310,25 +311,6 @@ static struct twl4030_madc_platform_data ldp_madc_data = {
.irq_line = 1,
};
-static struct regulator_consumer_supply ldp_vmmc1_supply = {
- .supply = "vmmc",
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data ldp_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &ldp_vmmc1_supply,
-};
-
static struct twl4030_platform_data ldp_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
@@ -336,7 +318,7 @@ static struct twl4030_platform_data ldp_twldata = {
/* platform_data for children goes here */
.madc = &ldp_madc_data,
.usb = &ldp_usb_data,
- .vmmc1 = &ldp_vmmc1,
+ .vmmc1 = &twl4030_vmmc1_data,
.gpio = &ldp_gpio_data,
.keypad = &ldp_kp_twl4030_data,
};
@@ -404,7 +386,7 @@ static void __init omap_ldp_init(void)
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
- ldp_vmmc1_supply.dev = mmc[0].dev;
+ twl4030_vmmc1_supply.dev = mmc[0].dev;
}
static void __init omap_ldp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c
b/arch/arm/mach-omap2/board-omap3beagle.c
index 6eb77e1..464bd14 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -46,6 +46,7 @@
#include "mux.h"
#include "hsmmc.h"
+#include "twl4030-pmic.h"
#define GPMC_CS0_BASE 0x60
#define GPMC_CS_SIZE 0x30
@@ -126,14 +127,6 @@ static struct omap_lcd_config omap3_beagle_lcd_config
__initdata = {
.ctrl_name = "internal",
};
-static struct regulator_consumer_supply beagle_vmmc1_supply = {
- .supply = "vmmc",
-};
-
-static struct regulator_consumer_supply beagle_vsim_supply = {
- .supply = "vmmc_aux",
-};
-
static struct gpio_led gpio_leds[];
static int beagle_twl_gpio_setup(struct device *dev,
@@ -150,8 +143,8 @@ static int beagle_twl_gpio_setup(struct device *dev,
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
- beagle_vmmc1_supply.dev = mmc[0].dev;
- beagle_vsim_supply.dev = mmc[0].dev;
+ twl4030_vmmc1_supply.dev = mmc[0].dev;
+ twl4030_vsim_supply.dev = mmc[0].dev;
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
@@ -191,36 +184,6 @@ static struct regulator_consumer_supply beagle_vdvi_supply
= {
.dev = &omap3_beagle_lcd_device.dev,
};
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data beagle_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &beagle_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data beagle_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &beagle_vsim_supply,
-};
-
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data beagle_vdac = {
.constraints = {
@@ -271,8 +234,8 @@ static struct twl4030_platform_data beagle_twldata = {
.usb = &beagle_usb_data,
.gpio = &beagle_gpio_data,
.codec = &beagle_codec_data,
- .vmmc1 = &beagle_vmmc1,
- .vsim = &beagle_vsim,
+ .vmmc1 = &twl4030_vmmc1_data,
+ .vsim = &twl4030_vsim_data,
.vdac = &beagle_vdac,
.vpll2 = &beagle_vpll2,
};
diff --git a/arch/arm/mach-omap2/board-omap3evm.c
b/arch/arm/mach-omap2/board-omap3evm.c
index d6bc88c..61fb896 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -46,6 +46,7 @@
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
+#include "twl4030-pmic.h"
#define OMAP3_EVM_TS_GPIO 175
#define OMAP3_EVM_EHCI_VBUS 22
@@ -329,44 +330,6 @@ static struct platform_device omap3_evm_dss_device = {
},
};
-static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
- .supply = "vmmc",
-};
-
-static struct regulator_consumer_supply omap3evm_vsim_supply = {
- .supply = "vmmc_aux",
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data omap3evm_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3evm_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data omap3evm_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3evm_vsim_supply,
-};
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -410,8 +373,8 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
- omap3evm_vmmc1_supply.dev = mmc[0].dev;
- omap3evm_vsim_supply.dev = mmc[0].dev;
+ twl4030_vmmc1_supply.dev = mmc[0].dev;
+ twl4030_vsim_supply.dev = mmc[0].dev;
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
@@ -563,8 +526,8 @@ static int __init omap3_evm_i2c_init(void)
* REVISIT: These entries can be set in omap3evm_twl_data
* after a merge with MFD tree
*/
- omap3evm_twldata.vmmc1 = &omap3evm_vmmc1;
- omap3evm_twldata.vsim = &omap3evm_vsim;
+ omap3evm_twldata.vmmc1 = &twl4030_vmmc1_data;
+ omap3evm_twldata.vsim = &twl4030_vsim_data;
omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
ARRAY_SIZE(omap3evm_i2c_boardinfo));
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c
b/arch/arm/mach-omap2/board-omap3touchbook.c
index 3943d0f..2388198 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -51,6 +51,7 @@
#include "mux.h"
#include "hsmmc.h"
+#include "twl4030-pmic.h"
#include <asm/setup.h>
@@ -140,14 +141,6 @@ static struct omap_lcd_config omap3_touchbook_lcd_config
__initdata = {
.ctrl_name = "internal",
};
-static struct regulator_consumer_supply touchbook_vmmc1_supply = {
- .supply = "vmmc",
-};
-
-static struct regulator_consumer_supply touchbook_vsim_supply = {
- .supply = "vmmc_aux",
-};
-
static struct gpio_led gpio_leds[];
static int touchbook_twl_gpio_setup(struct device *dev,
@@ -164,8 +157,8 @@ static int touchbook_twl_gpio_setup(struct device *dev,
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
- touchbook_vmmc1_supply.dev = mmc[0].dev;
- touchbook_vsim_supply.dev = mmc[0].dev;
+ twl4030_vmmc1_supply.dev = mmc[0].dev;
+ twl4030_vsim_supply.dev = mmc[0].dev;
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
@@ -205,36 +198,6 @@ static struct regulator_consumer_supply
touchbook_vdvi_supply = {
.dev = &omap3_touchbook_lcd_device.dev,
};
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data touchbook_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &touchbook_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data touchbook_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &touchbook_vsim_supply,
-};
-
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data touchbook_vdac = {
.constraints = {
@@ -285,8 +248,8 @@ static struct twl4030_platform_data touchbook_twldata = {
.usb = &touchbook_usb_data,
.gpio = &touchbook_gpio_data,
.codec = &touchbook_codec_data,
- .vmmc1 = &touchbook_vmmc1,
- .vsim = &touchbook_vsim,
+ .vmmc1 = &twl4030_vmmc1_data,
+ .vsim = &twl4030_vsim_data,
.vdac = &touchbook_vdac,
.vpll2 = &touchbook_vpll2,
};
diff --git a/arch/arm/mach-omap2/board-overo.c
b/arch/arm/mach-omap2/board-overo.c
index 50872a4..4707695 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -49,6 +49,7 @@
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
+#include "twl4030-pmic.h"
#define OVERO_GPIO_BT_XGATE 15
#define OVERO_GPIO_W2W_NRESET 16
@@ -290,16 +291,12 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
-static struct regulator_consumer_supply overo_vmmc1_supply = {
- .supply = "vmmc",
-};
-
static int overo_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
omap2_hsmmc_init(mmc);
- overo_vmmc1_supply.dev = mmc[0].dev;
+ twl4030_vmmc1_supply.dev = mmc[0].dev;
return 0;
}
@@ -315,20 +312,6 @@ static struct twl4030_usb_data overo_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
-static struct regulator_init_data overo_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &overo_vmmc1_supply,
-};
-
static struct twl4030_codec_audio_data overo_audio_data = {
.audio_mclk = 26000000,
};
@@ -346,7 +329,7 @@ static struct twl4030_platform_data overo_twldata = {
.gpio = &overo_gpio_data,
.usb = &overo_usb_data,
.codec = &overo_codec_data,
- .vmmc1 = &overo_vmmc1,
+ .vmmc1 = &twl4030_vmmc1_data,
};
static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c
b/arch/arm/mach-omap2/board-zoom-peripherals.c
index ca95d8d..3796a92 100755
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -26,6 +26,7 @@
#include "mux.h"
#include "hsmmc.h"
+#include "twl4030-pmic.h"
/* Zoom2 has Qwerty keyboard*/
static int board_keymap[] = {
@@ -94,63 +95,6 @@ static struct twl4030_keypad_data zoom_kp_twl4030_data = {
.rep = 1,
};
-static struct regulator_consumer_supply zoom_vmmc1_supply = {
- .supply = "vmmc",
-};
-
-static struct regulator_consumer_supply zoom_vsim_supply = {
- .supply = "vmmc_aux",
-};
-
-static struct regulator_consumer_supply zoom_vmmc2_supply = {
- .supply = "vmmc",
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data zoom_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &zoom_vmmc1_supply,
-};
-
-/* VMMC2 for MMC2 card */
-static struct regulator_init_data zoom_vmmc2 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 1850000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &zoom_vmmc2_supply,
-};
-
-/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data zoom_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &zoom_vsim_supply,
-};
-
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "external",
@@ -181,9 +125,9 @@ static int zoom_twl_gpio_setup(struct device *dev,
/* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
*/
- zoom_vmmc1_supply.dev = mmc[0].dev;
- zoom_vsim_supply.dev = mmc[0].dev;
- zoom_vmmc2_supply.dev = mmc[1].dev;
+ twl4030_vmmc1_supply.dev = mmc[0].dev;
+ twl4030_vsim_supply.dev = mmc[0].dev;
+ twl4030_vmmc2_supply.dev = mmc[1].dev;
return 0;
}
@@ -240,10 +184,9 @@ static struct twl4030_platform_data zoom_twldata = {
.gpio = &zoom_gpio_data,
.keypad = &zoom_kp_twl4030_data,
.codec = &zoom_codec_data,
- .vmmc1 = &zoom_vmmc1,
- .vmmc2 = &zoom_vmmc2,
- .vsim = &zoom_vsim,
-
+ .vmmc1 = &twl4030_vmmc1_data,
+ .vmmc2 = &twl4030_vmmc2_data,
+ .vsim = &twl4030_vsim_data,
};
static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = {
--
1.6.2.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
