Op 11 mrt 2010, om 10:24 heeft Koen Kooi het volgende geschreven:
>
> Op 10 mrt 2010, om 19:16 heeft Steve Sakoman het volgende geschreven:
>
>> On Tue, Mar 9, 2010 at 11:58 AM, Steve Sakoman <sako...@gmail.com> wrote:
>>> I just updated all my Beagle and Overo DSS patches to apply on the
>>> latest linux-omap head.
>>>
>>> I ran into a slight issue with parsing defaults, but saw that Tomi had
>>> already posted a workaround for that.
>>>
>>> With that patch applied I get pretty good results until I try to do
>>> something like play a DVD or display video from a webcam.
>>>
>>> At that point I get a kernel panic. See below.
>>
>> I did a little more research on this.
>>
>> The issue occurs in the following section of code in
>> drivers/video/omap2/dss/dispc.c:
>>
>> unsigned long dispc_fclk_rate(void)
>> {
>> unsigned long r = 0;
>>
>> if (dss_get_dispc_clk_source() == DSS_SRC_DSS1_ALWON_FCLK)
>> r = dss_clk_get_rate(DSS_CLK_FCK1);
>> else
>> #ifdef CONFIG_OMAP2_DSS_DSI
>> r = dsi_get_dsi1_pll_rate();
>> #else
>> BUG();
>> #endif
>> return r;
>> }
>>
>> Since my machines don't have DSI displays CONFIG_OMAP2_DSS_DSI is not
>> defined and the BUG() call is triggered.
>>
>> I don't know enough about what *should* be happening here to propose a
>> fix, but I'll continue looking.
>
> Not that you need the DSI_PLL config to get tighter timings to do e.g.
> 74.25MHz for 720p60. I had to rediscover that this week on DM37xx.....
That was supposed to read "note", so you *do* need it.--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
