> -----Original Message----- > From: linux-omap-ow...@vger.kernel.org [mailto:linux-omap- > ow...@vger.kernel.org] On Behalf Of Y, Kishore > Sent: Thursday, March 11, 2010 5:23 PM > To: Gadiyar, Anand; Tomi Valkeinen > Cc: linux-omap@vger.kernel.org > Subject: RE: compile break on dss2 branch for zoom3 > > > -----Original Message----- > > From: Gadiyar, Anand > > Sent: Thursday, March 11, 2010 5:18 PM > > To: Tomi Valkeinen; Y, Kishore > > Cc: linux-omap@vger.kernel.org > > Subject: RE: compile break on dss2 branch for zoom3 > > > > Tomi Valkeinen wrote: > > > > > > On Thu, 2010-03-11 at 12:40 +0100, ext Y, Kishore wrote: > > > > Hi Tomi, > > > > I am unable to compile dss2 tree for zoom3. Commit I am using > > following commit id > > > > > > > > 893d461b538e889da350061edaadeb8a9289913c > > > > OMAP: DSS2: quick hack for set mode > > > > > > > > > > > > Error I see is related to usb:- > > > > drivers/usb/core/hcd.c: In function 'usb_hcd_resume_root_hub': > > > > drivers/usb/core/hcd.c:1892: error: 'pm_wq' undeclared (first use in > > this function) > > > > drivers/usb/core/hcd.c:1892: error: (Each undeclared identifier is > > reported only once > > > > drivers/usb/core/hcd.c:1892: error: for each function it appears > in.) > > > > make[3]: *** [drivers/usb/core/hcd.o] Error 1 > > > > make[2]: *** [drivers/usb/core] Error 2 > > > > make[1]: *** [drivers/usb] Error 2 > > > > make: *** [drivers] Error 2 > > > > > > > > When I disable usb, build goes through but the board does not bootup > > with this image. It is stuck at uncompressing linux. > > > > > > Yes, mainstream linux tree seems to be broken. Not much I can do to > help > > > you there. You can try rebasing on top of later mainstrean version, > > > perhaps it's been fixed there. > > > > > > > I sent this patch [1] to linux-usb to fix this. It's yet to be queued > up. > > The alternative is to enable CONFIG_PM_RUNTIME in the build. > > > > Regards, > > Anand > > > > [1] http://marc.info/?l=linux-usb&m=126675883221098&w=2 > > I will try this out. I have tried to use the main line which already has this patch. I am able to compile the code without any issues. But board still does not boot. Am I missing something?
My bootargs: setenv bootargs console=ttyS3,115200n8 noinitrd root=/dev/nfs rw nfsroot=192.168.223.72:/home/x0114913/fs1_inc2_rc0,nolock,rsize=1024,wsize=1024 rootdelay=0 ip=192.168.223.251 debug > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html