On Thu, 11 Mar 2010, Sriramakrishnan wrote:

> The emac driver uses generic name for the module and phy
> clocks. Updated the omap3xxx_clks table to match the names
> used by the Davinci emac driver.
> 
> Signed-off-by: Sriramakrishnan <s...@ti.com>

Acked-by: Paul Walmsley <p...@pwsan.com>

At some point, someone should go through that davinci_emac.c driver and 
change the DaVinci references to "TI" or something generic, now that this 
core exists on DaVinci, OMAP, etc.

> ---
>  arch/arm/mach-omap2/clock3xxx_data.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/clock3xxx_data.c 
> b/arch/arm/mach-omap2/clock3xxx_data.c
> index d5153b6..989da2e 100644
> --- a/arch/arm/mach-omap2/clock3xxx_data.c
> +++ b/arch/arm/mach-omap2/clock3xxx_data.c
> @@ -3472,8 +3472,8 @@ static struct omap_clk omap3xxx_clks[] = {
>       CLK(NULL,       "ipss_ick",     &ipss_ick,      CK_AM35XX),
>       CLK(NULL,       "rmii_ck",      &rmii_ck,       CK_AM35XX),
>       CLK(NULL,       "pclk_ck",      &pclk_ck,       CK_AM35XX),
> -     CLK("davinci_emac",     "ick",          &emac_ick,      CK_AM35XX),
> -     CLK("davinci_emac",     "fck",          &emac_fck,      CK_AM35XX),
> +     CLK("davinci_emac",     "emac_clk",     &emac_ick,      CK_AM35XX),
> +     CLK("davinci_emac",     "phy_clk",      &emac_fck,      CK_AM35XX),
>       CLK("vpfe-capture",     "master",       &vpfe_ick,      CK_AM35XX),
>       CLK("vpfe-capture",     "slave",        &vpfe_fck,      CK_AM35XX),
>       CLK("musb_hdrc",        "ick",          &hsotgusb_ick_am35xx,   
> CK_AM35XX),
> -- 
> 1.6.2.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


- Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to