From: Tero Kristo <tero.kri...@nokia.com>
Added omap3_pwrdm_set_next_pwrst and omap3_pwrdm_read_next_pwrst. These
functions add support for INACTIVE and ON states to the standard OMAP
powerdomain functions, and add caching logic for the next state. HW
directly supports the reading of INACTIVE / ON from the previous state
register, but programming INACTIVE / ON can't be done directly.
These functions are used in subsequent patches to simplify the logic of
the idle loop.
Signed-off-by: Tero Kristo <tero.kri...@nokia.com>
---
arch/arm/mach-omap2/pm.h | 2 +
arch/arm/mach-omap2/pm34xx.c | 65 +++++++++++++++++++++++++++++++++++++++++-
2 files changed, 66 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index b761be5..5f35911 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -67,6 +67,8 @@ static inline void omap3_pm_init_vc(struct prm_setup_vc
*setup_vc)
extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
+extern int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
+extern int omap3_pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
extern u32 wakeup_timer_seconds;
extern struct omap_dm_timer *gptimer_wakeup;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index a30941a..da4e684 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -576,6 +576,68 @@ int omap3_can_sleep(void)
return 1;
}
+struct powerdomain_data {
+ u8 next_state;
+};
+
+static struct powerdomain_data mpu_pwrdm_data;
+static struct powerdomain_data core_pwrdm_data;
+static struct powerdomain_data neon_pwrdm_data;
+
+static struct powerdomain_data *get_pwrdm_data(struct powerdomain *pwrdm)
+{
+ if (pwrdm == mpu_pwrdm)
+ return &mpu_pwrdm_data;
+ else if (pwrdm == core_pwrdm)
+ return &core_pwrdm_data;
+ else if (pwrdm == neon_pwrdm)
+ return &neon_pwrdm_data;
+ return NULL;
+}
+
+static void omap3_pwrdm_init_pwrst_cache(struct powerdomain *pwrdm)
+{
+ struct powerdomain_data *data = get_pwrdm_data(pwrdm);
+ if (data)
+ data->next_state = pwrdm_read_next_pwrst(pwrdm);
+}
+
+int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ struct powerdomain_data *data = get_pwrdm_data(pwrdm);
+ u8 prg_pwrst;
+
+ if (!data)
+ return pwrdm_set_next_pwrst(pwrdm, pwrst);
+
+ if (data->next_state == pwrst)
+ return 0;
+
+ if (pwrst == PWRDM_POWER_INACTIVE)
+ prg_pwrst = PWRDM_POWER_ON;
+ else
+ prg_pwrst = pwrst;
+
+ pwrdm_set_next_pwrst(pwrdm, prg_pwrst);
+
+ if (pwrst == PWRDM_POWER_ON)
+ omap2_clkdm_deny_idle(pwrdm->pwrdm_clkdms[0]);
+ else
+ omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+
+ data->next_state = pwrst;
+ return 0;
+}
+
+int omap3_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+ struct powerdomain_data *data = get_pwrdm_data(pwrdm);
+
+ if (!data)
+ return pwrdm_read_next_pwrst(pwrdm);
+ return data->next_state;
+}
+
/* This sets pwrdm state (other than mpu & core. Currently only ON &
* RET are supported. Function is assuming that clkdm doesn't have
* hw_sup mode enabled. */
@@ -604,7 +666,7 @@ int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
pwrdm_wait_transition(pwrdm);
}
- ret = pwrdm_set_next_pwrst(pwrdm, state);
+ ret = omap3_pwrdm_set_next_pwrst(pwrdm, state);
if (ret) {
printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
pwrdm->name);
@@ -1103,6 +1165,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm,
void *unused)
if (!pwrdm->pwrsts)
return 0;
+ omap3_pwrdm_init_pwrst_cache(pwrdm);
pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
if (!pwrst)
return -ENOMEM;
--
1.5.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
