* Tony Lindgren <t...@atomide.com> [100315 11:35]:
> * Cory Maccarrone <darkstar6...@gmail.com> [100309 15:38]:
> > On Tue, Mar 9, 2010 at 7:56 AM, Tony Lindgren <t...@atomide.com> wrote:
> > >
> > > Does your system boot without any patches if DEBUG_LL is not set
> > > in your .config?
> >
> > No, it doesn't. Seems like the debugging code is still trying to run,
> > even disabled. If I add in that check, it'll boot with DEBUG_LL not
> > set, but won't without that.
>
> Sorry for the delay on this. How about with the following patch with
> DEBUG_LL not set?
>
> Note that this is using the shift register now too.
Then we may want to do this too for the boards that don't have any UART.
Tony
>From b33f67e61cc45558cfbda86b3e2032ffbcb2f99c Mon Sep 17 00:00:00 2001
From: Tony Lindgren <t...@atomide.com>
Date: Mon, 15 Mar 2010 10:47:08 -0700
Subject: [PATCH] omap: Fix uncompress code for boards with no UART
With the recent DEBUG_LL and uncompress code changes, boards
with no UART configured fail to boot as pointed out by
Cory Maccarrone <darkstar6...@gmail.com>.
Some boards may not have UARTs available at all, so add
DEBUG_LL_NONE option for that.
Signed-off-by: Tony Lindgren <t...@atomide.com>
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index dc37b2c..7d69d39 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -66,6 +66,13 @@ static inline void flush(void)
/*
* Macros to configure UART1 and debug UART
*/
+
+#define DEBUG_LL_NONE(mach) \
+ if (machine_is_##mach()) { \
+ uart_base = 0; \
+ break; \
+ }
+
#define _DEBUG_LL_ENTRY(mach, uart1_phys, uart1_shft, \
dbg_uart, dbg_shft, dbg_id) \
if (machine_is_##mach()) { \
