Hi,
ext G, Manjunath Kondaiah wrote:
-----Original Message-----
From: linux-omap-ow...@vger.kernel.org
[mailto:linux-omap-ow...@vger.kernel.org] On Behalf Of Roger Quadros
Sent: Tuesday, March 23, 2010 3:26 PM
To: t...@atomide.com
Cc: tomi.valkei...@nokia.com; linux-omap@vger.kernel.org;
linux-fb...@vger.kernel.org
Subject: [PATCH 1/5] OMAP: RX51: Add LCD Panel support
From: Roger Quadros <roger.quad...@nokia.com>
Adds basic support for LCD Panel on Nokia N900
Signed-off-by: Roger Quadros <roger.quad...@nokia.com>
---
arch/arm/mach-omap2/Makefile | 1 +
arch/arm/mach-omap2/board-rx51-peripherals.c | 13 ++++
arch/arm/mach-omap2/board-rx51-video.c | 95
++++++++++++++++++++++++++
3 files changed, 109 insertions(+), 0 deletions(-) create
mode 100644 arch/arm/mach-omap2/board-rx51-video.c
diff --git a/arch/arm/mach-omap2/Makefile
b/arch/arm/mach-omap2/Makefile index 4b9fc57..b03cbb4 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -122,6 +122,7 @@ obj-$(CONFIG_MACH_NOKIA_N8X0)
+= board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
board-rx51-sdram.o \
board-rx51-peripherals.o \
+ board-rx51-video.o \
hsmmc.o
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \
board-zoom-peripherals.o \
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c
b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 4377a4c..f404537 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -45,6 +45,7 @@
/* list all spi devices here */
enum {
RX51_SPI_WL1251,
+ RX51_SPI_MIPID, /* LCD panel */
};
static struct wl12xx_platform_data wl1251_pdata; @@ -54,6
+55,11 @@ static struct omap2_mcspi_device_config
wl1251_mcspi_config = {
.single_channel = 1,
};
+static struct omap2_mcspi_device_config mipid_mcspi_config = {
+ .turbo_mode = 0,
Any specific reason for not enabling turbo mode?
It will increase throughput if it is configured in single channel mode.
No specific reason. That was the original configuration, in previous versions of
the code. It shouldn't make much difference as mipid is only used for panel
detection, enable/disable, and backlight control. Need to test if it works with
turbo mode.
+ .single_channel = 1,
+};
+
static struct spi_board_info
rx51_peripherals_spi_board_info[] __initdata = {
[RX51_SPI_WL1251] = {
.modalias = "wl1251",
+static int __init rx51_video_init(void) {
+ if (!machine_is_nokia_rx51())
+ return 0;
+
+ if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
+ pr_err("%s cannot configure MUX for LCD
RESET\n", __func__);
+ return 0;
+ }
+
+ if (gpio_request(RX51_LCD_RESET_GPIO, "LCD ACX565AKM reset")) {
+ pr_err("%s failed to get LCD Reset GPIO\n", __func__);
+ return 0;
+ }
+
+ gpio_direction_output(RX51_LCD_RESET_GPIO, 1);
+
+ platform_add_devices(rx51_video_devices,
+ ARRAY_SIZE(rx51_video_devices));
+ return 0;
+}
Since this functional always returns 0, you can make return value of this
function as void.
I guess it is better to return non zero on failure paths then.
thanks.
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
