AFAIK, NAND support is currently missing for OMAP3430 LDP boards in LO.
-Vimal
On Sun, Apr 4, 2010 at 9:34 PM, Ghorai, Sukumar <s-gho...@ti.com> wrote:
> Aldyth,
> 1. Do you mean that NAND boot is not working?
> 2. Does MMC/SD boot working? If yes, boot the platform from MMC/SD using the
> latest x-loade/ u-boot and flush the same binaries to NAND using the
> following commands.
> mmcinit 0
> nand unlock 80000 80000
> nand erase 80000 80000
> fatload mmc 0 80000000 u-boot.bin
> nand write.i 80000000 80000 ${filesize}
>
> nand unlock 0 80000
> nand erase 0 80000
> fatload mmc 0 80000000 MLO
> nand write.i 80000000 0 ${filesize}
>
> Regards,
> Ghorai
>
>> -----Original Message-----
>> From: linux-omap-ow...@vger.kernel.org [mailto:linux-omap-
>> ow...@vger.kernel.org] On Behalf Of Tar Gz
>> Sent: 2010-04-04 11:13
>> To: linux-omap
>> Subject: [ASK] OMAP 3430 LDP Trouble
>>
>> Hi all,
>> i'm sorry if my english too bad
>>
>> I try to porting linux to omap 3430 LDP..but my board have trouble
>> after i running this command:
>>
>> nand ecc sw
>> nand unlock 80000 80000
>> nand erase 80000 80000
>>
>> nand ecc hw
>> nand unlock 0 80000
>> nand erase 0 80000
>>
>> and if i try to turn on my board, BT led [blue led] always on and my
>> minicom can't show anything...and i forget to setting the enviroment
>> variable mmcinit..
>>
>> my question is, how to make my board can run normally like before?
>>
>> best regards,
>> Aldyth M
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majord...@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
