This patch will use separate clk/volt setup_time for RET and OFF state,
also create separate copies of vc parameters for each Si in voltage.c.
Re-programing the setup time according to the target state of CORE power domain.
The voltsetup2 is used only when the device exits sys_off mode
(with PRM_VOLTCTRL[3]SEL_OFF set to 1).
Changed vdd0_/vdd1_ to vdd1_/vdd2_ in prcm vc setuptime structure.
Signed-off-by: Lesly A M <x0080...@ti.com>
Cc: Nishanth Menon <n...@ti.com>
Cc: David Derrick <dderr...@ti.com>
Cc: Samuel Ortiz <sa...@linux.intel.com>
---
arch/arm/mach-omap2/board-3430sdp.c | 21 +----
arch/arm/mach-omap2/board-3630sdp.c | 4 +-
arch/arm/mach-omap2/board-zoom2.c | 4 +-
arch/arm/mach-omap2/board-zoom3.c | 4 +-
arch/arm/mach-omap2/pm.h | 18 ----
arch/arm/mach-omap2/pm34xx.c | 26 +-----
arch/arm/mach-omap2/voltage.c | 157 ++++++++++++++++++++++++++--------
arch/arm/mach-omap2/voltage.h | 31 +++++++
8 files changed, 165 insertions(+), 100 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c
b/arch/arm/mach-omap2/board-3430sdp.c
index e80f8d4..9cc8569 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -48,7 +48,6 @@
#include "mux.h"
#include "sdram-qimonda-hyb18m512160af-6.h"
#include "hsmmc.h"
-#include "pm.h"
#include "voltage.h"
#include "omap3-opp.h"
#include "smartreflex-class3.h"
@@ -79,23 +78,6 @@ static struct cpuidle_params omap3_cpuidle_params_table[] = {
{1, 10000, 30000, 300000},
};
-/* FIXME: These are not the optimal setup values to be used on 3430sdp*/
-static struct prm_setup_vc omap3_setuptime_table = {
- .clksetup = 0xff,
- .voltsetup_time1 = 0xfff,
- .voltsetup_time2 = 0xfff,
- .voltoffset = 0xff,
- .voltsetup2 = 0xff,
- .vdd0_on = 0x30,
- .vdd0_onlp = 0x20,
- .vdd0_ret = 0x1e,
- .vdd0_off = 0x00,
- .vdd1_on = 0x2c,
- .vdd1_onlp = 0x20,
- .vdd1_ret = 0x1e,
- .vdd1_off = 0x00,
-};
-
static int board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
@@ -348,7 +330,6 @@ static void __init omap_3430sdp_init_irq(void)
omap_board_config_size = ARRAY_SIZE(sdp3430_config);
omap3_pm_init_opp_table();
omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
- omap_voltage_init_vc(&omap3_setuptime_table);
omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
@@ -897,6 +878,8 @@ static struct omap_musb_board_data musb_board_data = {
static void __init omap_3430sdp_init(void)
{
+ omap_voltage_init_vc(NULL);
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3430_i2c_init();
platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
diff --git a/arch/arm/mach-omap2/board-3630sdp.c
b/arch/arm/mach-omap2/board-3630sdp.c
index 2fc1d0b..19ecd67 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -25,8 +25,8 @@
#include "mux.h"
#include "sdram-hynix-h8mbx00u0mer-0em.h"
-#include "pm.h"
#include "omap3-opp.h"
+#include "voltage.h"
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
@@ -101,6 +101,8 @@ static struct omap_board_mux board_mux[] __initdata = {
static void __init omap_sdp_init(void)
{
+ omap_voltage_init_vc(NULL);
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
omap_serial_init();
zoom_peripherals_init();
diff --git a/arch/arm/mach-omap2/board-zoom2.c
b/arch/arm/mach-omap2/board-zoom2.c
index 50924d4..20247f8 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -25,8 +25,8 @@
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
-#include "pm.h"
#include "omap3-opp.h"
+#include "voltage.h"
static void __init omap_zoom2_init_irq(void)
{
@@ -82,6 +82,8 @@ static struct omap_board_mux board_mux[] __initdata = {
static void __init omap_zoom2_init(void)
{
+ omap_voltage_init_vc(NULL);
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
zoom_peripherals_init();
zoom_debugboard_init();
diff --git a/arch/arm/mach-omap2/board-zoom3.c
b/arch/arm/mach-omap2/board-zoom3.c
index a175ffe..d42e5d2 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -24,8 +24,8 @@
#include "mux.h"
#include "sdram-hynix-h8mbx00u0mer-0em.h"
-#include "pm.h"
#include "omap3-opp.h"
+#include "voltage.h"
static void __init omap_zoom_map_io(void)
{
@@ -70,6 +70,8 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata
__initconst = {
static void __init omap_zoom_init(void)
{
+ omap_voltage_init_vc(NULL);
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
zoom_peripherals_init();
zoom_debugboard_init();
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 55bde0d..7e3726d 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -40,24 +40,6 @@ inline void omap3_pm_init_cpuidle(struct cpuidle_params
*cpuidle_board_params)
}
#endif
-struct prm_setup_vc {
- u16 clksetup;
- u16 voltsetup_time1;
- u16 voltsetup_time2;
- u16 voltoffset;
- u16 voltsetup2;
-/* PRM_VC_CMD_VAL_0 specific bits */
- u16 vdd0_on;
- u16 vdd0_onlp;
- u16 vdd0_ret;
- u16 vdd0_off;
-/* PRM_VC_CMD_VAL_1 specific bits */
- u16 vdd1_on;
- u16 vdd1_onlp;
- u16 vdd1_ret;
- u16 vdd1_off;
-};
-
extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index f3994c0..b7a604e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -423,20 +423,12 @@ void omap_sram_idle(void)
if (core_next_state < PWRDM_POWER_ON) {
omap_uart_prepare_idle(0);
omap_uart_prepare_idle(1);
- if (core_next_state == PWRDM_POWER_OFF) {
- u32 voltctrl = OMAP3430_AUTO_OFF;
+ /* Update the voltsetup time for RET/OFF */
+ omap_voltage_vc_update(core_next_state);
- if (voltage_off_while_idle)
- voltctrl |= OMAP3430_SEL_OFF;
- prm_set_mod_reg_bits(voltctrl,
- OMAP3430_GR_MOD,
- OMAP3_PRM_VOLTCTRL_OFFSET);
+ if (core_next_state == PWRDM_POWER_OFF) {
omap3_core_save_context();
omap3_prcm_save_context();
- } else if (core_next_state == PWRDM_POWER_RET) {
- prm_set_mod_reg_bits(OMAP3430_AUTO_RET,
- OMAP3430_GR_MOD,
- OMAP3_PRM_VOLTCTRL_OFFSET);
}
/* Enable IO-PAD and IO-CHAIN wakeups */
prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
@@ -496,18 +488,6 @@ void omap_sram_idle(void)
}
omap_uart_resume_idle(0);
omap_uart_resume_idle(1);
- if (core_next_state == PWRDM_POWER_OFF) {
- u32 voltctrl = OMAP3430_AUTO_OFF;
-
- if (voltage_off_while_idle)
- voltctrl |= OMAP3430_SEL_OFF;
- prm_clear_mod_reg_bits(voltctrl,
- OMAP3430_GR_MOD,
- OMAP3_PRM_VOLTCTRL_OFFSET);
- } else if (core_next_state == PWRDM_POWER_RET)
- prm_clear_mod_reg_bits(OMAP3430_AUTO_RET,
- OMAP3430_GR_MOD,
- OMAP3_PRM_VOLTCTRL_OFFSET);
}
omap3_intc_resume_idle();
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 11aeb69..bb80631 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -127,25 +127,70 @@ struct vc_reg_info {
} vc_reg;
/*
- * Default voltage controller settings for OMAP3
+ * Default voltage controller settings for OMAP3430
*/
-static struct prm_setup_vc vc_config = {
- .clksetup = 0xff,
- .voltsetup_time1 = 0xfff,
- .voltsetup_time2 = 0xfff,
- .voltoffset = 0xff,
- .voltsetup2 = 0xff,
- .vdd0_on = 0x30, /* 1.2v */
- .vdd0_onlp = 0x20, /* 1.0v */
- .vdd0_ret = 0x1e, /* 0.975v */
- .vdd0_off = 0x00, /* 0.6v */
- .vdd1_on = 0x2c, /* 1.15v */
+struct __initdata prm_setup_vc omap3430_vc_config = {
+ /* CLK & VOLT SETUPTIME for RET */
+ .ret = {
+ .clksetup = 0x1,
+ .voltsetup1_vdd1 = 0x005B,
+ .voltsetup1_vdd2 = 0x0055,
+ .voltsetup2 = 0x0,
+ .voltoffset = 0x0,
+ },
+ /* CLK & VOLT SETUPTIME for OFF */
+ .off = {
+ .clksetup = 0x14A,
+ .voltsetup1_vdd1 = 0x00B3,
+ .voltsetup1_vdd2 = 0x00A0,
+ .voltsetup2 = 0x118,
+ .voltoffset = 0x32,
+ },
+ /* VC COMMAND VALUES for VDD1/VDD2 */
+ .vdd1_on = 0x30, /* 1.2v */
.vdd1_onlp = 0x20, /* 1.0v */
- .vdd1_ret = 0x1e, /* .975v */
+ .vdd1_ret = 0x1e, /* 0.975v */
.vdd1_off = 0x00, /* 0.6v */
+ .vdd2_on = 0x2c, /* 1.15v */
+ .vdd2_onlp = 0x20, /* 1.0v */
+ .vdd2_ret = 0x1e, /* 0.975v */
+ .vdd2_off = 0x00, /* 0.6v */
};
/*
+ * Default voltage controller settings for OMAP3630
+ */
+struct __initdata prm_setup_vc omap3630_vc_config = {
+ /* CLK & VOLT SETUPTIME for RET */
+ .ret = {
+ .clksetup = 0x1,
+ .voltsetup1_vdd1 = 0x005B,
+ .voltsetup1_vdd2 = 0x0055,
+ .voltsetup2 = 0x0,
+ .voltoffset = 0x0,
+ },
+ /* CLK & VOLT SETUPTIME for OFF */
+ .off = {
+ .clksetup = 0x14A,
+ .voltsetup1_vdd1 = 0x00B3,
+ .voltsetup1_vdd2 = 0x00A0,
+ .voltsetup2 = 0x118,
+ .voltoffset = 0x32,
+ },
+ /* VC COMMAND VALUES for VDD1/VDD2 */
+ .vdd1_on = 0x28, /* 1.1v */
+ .vdd1_onlp = 0x20, /* 1.0v */
+ .vdd1_ret = 0x13, /* 0.83v */
+ .vdd1_off = 0x00, /* 0.6v */
+ .vdd2_on = 0x2B, /* 1.1375v */
+ .vdd2_onlp = 0x20, /* 1.0v */
+ .vdd2_ret = 0x13, /* 0.83v */
+ .vdd2_off = 0x00, /* 0.6v */
+};
+
+static struct prm_setup_vc vc_config;
+
+/*
* Structures containing OMAP3430 voltage supported and various data
* associated with it per voltage domain basis. Smartreflex Ntarget
* vales are left as 0 as they have to be populated by smartreflex
@@ -221,28 +266,28 @@ static void __init init_voltagecontroller(void)
VC_VOLRA0_SHIFT));
voltage_write_reg(vc_reg.cmdval0_reg,
- (vc_config.vdd0_on << VC_CMD_ON_SHIFT) |
- (vc_config.vdd0_onlp << VC_CMD_ONLP_SHIFT) |
- (vc_config.vdd0_ret << VC_CMD_RET_SHIFT) |
- (vc_config.vdd0_off << VC_CMD_OFF_SHIFT));
-
- voltage_write_reg(vc_reg.cmdval1_reg,
(vc_config.vdd1_on << VC_CMD_ON_SHIFT) |
(vc_config.vdd1_onlp << VC_CMD_ONLP_SHIFT) |
(vc_config.vdd1_ret << VC_CMD_RET_SHIFT) |
(vc_config.vdd1_off << VC_CMD_OFF_SHIFT));
+ voltage_write_reg(vc_reg.cmdval1_reg,
+ (vc_config.vdd2_on << VC_CMD_ON_SHIFT) |
+ (vc_config.vdd2_onlp << VC_CMD_ONLP_SHIFT) |
+ (vc_config.vdd2_ret << VC_CMD_RET_SHIFT) |
+ (vc_config.vdd2_off << VC_CMD_OFF_SHIFT));
+
voltage_write_reg(vc_ch_conf_reg, VC_CMD1 | VC_RAV1);
voltage_write_reg(vc_i2c_cfg_reg, VC_MCODE_SHIFT | VC_HSEN);
/* Write setup times */
- voltage_write_reg(prm_clksetup_reg, vc_config.clksetup);
+ voltage_write_reg(prm_clksetup_reg, vc_config.ret.clksetup);
voltage_write_reg(prm_voltsetup1_reg,
- (vc_config.voltsetup_time2 << VC_SETUP_TIME2_SHIFT) |
- (vc_config.voltsetup_time1 << VC_SETUP_TIME1_SHIFT));
- voltage_write_reg(prm_voltoffset_reg, vc_config.voltoffset);
- voltage_write_reg(prm_voltsetup2_reg, vc_config.voltsetup2);
+ (vc_config.ret.voltsetup1_vdd2 << VC_SETUP_TIME2_SHIFT) |
+ (vc_config.ret.voltsetup1_vdd1 << VC_SETUP_TIME1_SHIFT));
+ voltage_write_reg(prm_voltoffset_reg, vc_config.ret.voltoffset);
+ voltage_write_reg(prm_voltsetup2_reg, vc_config.ret.voltsetup2);
}
static void vp_latch_vsel(int vp_id)
@@ -833,22 +878,60 @@ void omap_change_voltscale_method(int voltscale_method)
*/
void __init omap_voltage_init_vc(struct prm_setup_vc *setup_vc)
{
+ if (cpu_is_omap3430())
+ memcpy(&vc_config, &omap3430_vc_config,
+ sizeof(struct prm_setup_vc));
+ else if (cpu_is_omap3630())
+ memcpy(&vc_config, &omap3630_vc_config,
+ sizeof(struct prm_setup_vc));
+
if (!setup_vc)
return;
- vc_config.clksetup = setup_vc->clksetup;
- vc_config.voltsetup_time1 = setup_vc->voltsetup_time1;
- vc_config.voltsetup_time2 = setup_vc->voltsetup_time2;
- vc_config.voltoffset = setup_vc->voltoffset;
- vc_config.voltsetup2 = setup_vc->voltsetup2;
- vc_config.vdd0_on = setup_vc->vdd0_on;
- vc_config.vdd0_onlp = setup_vc->vdd0_onlp;
- vc_config.vdd0_ret = setup_vc->vdd0_ret;
- vc_config.vdd0_off = setup_vc->vdd0_off;
- vc_config.vdd1_on = setup_vc->vdd1_on;
- vc_config.vdd1_onlp = setup_vc->vdd1_onlp;
- vc_config.vdd1_ret = setup_vc->vdd1_ret;
- vc_config.vdd1_off = setup_vc->vdd1_off;
+ /* CLK SETUPTIME for RET & OFF */
+ vc_config.ret.clksetup = setup_vc->ret.clksetup;
+ vc_config.off.clksetup = setup_vc->off.clksetup;
+}
+
+void omap_voltage_vc_update(int core_next_state)
+{
+ u32 voltctrl = 0;
+
+ /* update voltsetup time */
+ if (core_next_state == PWRDM_POWER_OFF) {
+ voltctrl = OMAP3430_AUTO_OFF;
+ prm_write_mod_reg(vc_config.off.clksetup, OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSETUP_OFFSET);
+ prm_write_mod_reg((vc_config.off.voltsetup1_vdd2 <<
+ OMAP3430_SETUP_TIME2_SHIFT) |
+ (vc_config.off.voltsetup1_vdd1 <<
+ OMAP3430_SETUP_TIME1_SHIFT),
+ OMAP3430_GR_MOD, OMAP3_PRM_VOLTSETUP1_OFFSET);
+
+ if (voltage_off_while_idle) {
+ voltctrl |= OMAP3430_SEL_OFF;
+ prm_write_mod_reg(vc_config.off.voltsetup2,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_VOLTSETUP2_OFFSET);
+ }
+
+ } else if (core_next_state == PWRDM_POWER_RET) {
+ voltctrl = OMAP3430_AUTO_RET;
+ prm_write_mod_reg(vc_config.ret.clksetup, OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSETUP_OFFSET);
+ prm_write_mod_reg((vc_config.ret.voltsetup1_vdd2 <<
+ OMAP3430_SETUP_TIME2_SHIFT) |
+ (vc_config.ret.voltsetup1_vdd1 <<
+ OMAP3430_SETUP_TIME1_SHIFT),
+ OMAP3430_GR_MOD, OMAP3_PRM_VOLTSETUP1_OFFSET);
+
+ /* clear voltsetup2_reg if sys_off not enabled */
+ prm_write_mod_reg(vc_config.ret.voltsetup2, OMAP3430_GR_MOD,
+ OMAP3_PRM_VOLTSETUP2_OFFSET);
+ }
+
+ prm_set_mod_reg_bits(voltctrl, OMAP3430_GR_MOD,
+ OMAP3_PRM_VOLTCTRL_OFFSET);
}
/**
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 473a953..b0cf1db 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -8,12 +8,41 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+
+#ifndef __ARCH_ARM_MACH_OMAP3_VOLTAGE_H
+#define __ARCH_ARM_MACH_OMAP3_VOLTAGE_H
+
#include "pm.h"
/* VoltageDomain instances */
#define VDD1 0
#define VDD2 1
+struct setuptime_vc{
+ u16 clksetup;
+ u16 voltsetup1_vdd1;
+ u16 voltsetup1_vdd2;
+ u16 voltsetup2;
+ u16 voltoffset;
+};
+
+struct prm_setup_vc {
+/* CLK & VOLT SETUPTIME for RET */
+ struct setuptime_vc ret;
+/* CLK & VOLT SETUPTIME for OFF */
+ struct setuptime_vc off;
+/* PRM_VC_CMD_VAL_0 specific bits */
+ u16 vdd1_on;
+ u16 vdd1_onlp;
+ u16 vdd1_ret;
+ u16 vdd1_off;
+/* PRM_VC_CMD_VAL_1 specific bits */
+ u16 vdd2_on;
+ u16 vdd2_onlp;
+ u16 vdd2_ret;
+ u16 vdd2_off;
+};
+
#define VOLTSCALE_VPFORCEUPDATE 1
#define VOLTSCALE_VCBYPASS 2
@@ -87,6 +116,7 @@ struct omap_volt_data {
void omap_voltageprocessor_enable(int vp_id);
void omap_voltageprocessor_disable(int vp_id);
void omap_voltage_init_vc(struct prm_setup_vc *setup_vc);
+void omap_voltage_vc_update(int core_next_state);
void omap_voltage_init(void);
int omap_voltage_scale(int vdd, unsigned long target_volt,
unsigned long current_volt);
@@ -97,3 +127,4 @@ int omap_match_volt(int vdd, unsigned long volt,
struct omap_volt_data *volt_data);
unsigned long get_curr_vdd1_voltage(void);
unsigned long get_curr_vdd2_voltage(void);
+#endif
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
