Hi,
> diff --git a/arch/arm/mach-omap2/resource34xx.c
> b/arch/arm/mach-omap2/resource34xx.c
> index fc1b775..a52ae05 100644
> --- a/arch/arm/mach-omap2/resource34xx.c
> +++ b/arch/arm/mach-omap2/resource34xx.c
> @@ -154,7 +154,7 @@ static struct device dummy_dsp_dev;
> static struct device vdd2_dev;
> static int vdd1_lock;
> static int vdd2_lock;
> -static struct clk *dpll1_clk, *dpll2_clk, *dpll3_clk;
> +static struct clk *dpll1_clk, *dpll2_clk, *dpll3_clk, *l3_clk;
> static int curr_vdd1_opp;
> static int curr_vdd2_opp;
> static DEFINE_MUTEX(dvfs_mutex);
> @@ -214,7 +214,6 @@ static int __deprecated freq_to_opp(u8 *opp_id, enum
> opp_t opp_type,
> */
> void init_opp(struct shared_resource *resp)
> {
> - struct clk *l3_clk;
> int ret;
> u8 opp_id;
> resp->no_of_users = 0;
> @@ -553,3 +552,118 @@ int validate_freq(struct shared_resource *resp, u32
> target_level)
> return freq_to_opp(&x, OPP_DSP, target_level);
> return 0;
> }
> +
> +static struct omap_opp *c_vdd2_opp;
> +int program_vdd2_opp_3430()
> +{
> + int ret = 0, div;
> + unsigned long freq = 0;
> + struct omap_opp *c_opp, *min_opp;
> + unsigned long vc, vt;
> +
> + min_opp = opp_find_freq_ceil(OPP_L3, &freq);
This could be calculated once at boottime.
> + freq = ULONG_MAX;
> + c_vdd2_opp = c_opp = opp_find_freq_exact(OPP_L3, l3_clk->rate, true);
> +
> + if (opp_get_freq(c_opp) != opp_get_freq(min_opp)) {
opp_get_freq(min_opp) could also be calculated once at boottime.
> + freq = opp_get_freq(min_opp);
> + lock_scratchpad_sem();
> + div = cm_read_mod_reg(CORE_MOD, CM_CLKSEL) &
> + OMAP3430_CLKSEL_L3_MASK;
> + ret = clk_set_rate(dpll3_clk, freq * div);
> +#ifdef CONFIG_PM
> + omap3_save_scratchpad_contents();
> +#endif
> + unlock_scratchpad_sem();
> + }
> +
> + /* for omap3430, VDD2 should be at 1.2V */
> + vt = 1200000;
> + vc = opp_get_voltage(c_opp);
> + ret = omap_voltage_scale(VDD2_OPP, vt, vc);
> + return ret;
> +}
> +
> +int reprogram_vdd2_opp_3430()
> +{
> + int ret = 0, div;
> + unsigned long freq = 0;
> + struct omap_opp *c_opp;
> + u8 vc, vt;
> + unsigned long uvdc;
> +
> + c_opp = opp_find_freq_exact(OPP_L3, l3_clk->rate, true);
> + if (opp_get_freq(c_opp) != opp_get_freq(c_vdd2_opp)) {
And then this could become : if (opp_get_freq(c_vdd2_opp) != min_freq) {
> + freq = opp_get_freq(c_vdd2_opp);
> + div = cm_read_mod_reg(CORE_MOD, CM_CLKSEL) &
> + OMAP3430_CLKSEL_L3_MASK;
> + ret = clk_set_rate(dpll3_clk, freq * div);
> + }
> + vc = omap_twl_uv_to_vsel(1200000);
> + uvdc = opp_get_voltage(c_vdd2_opp);
> + vt = omap_twl_uv_to_vsel(uvdc);
> + ret = omap_voltage_scale(VDD2_OPP, vt, vc);
> + return ret;
> +}
> +
> +
And similar for 3630 ...
> +int program_vdd2_opp_3630()
> +{
> + int ret = 0, div;
> + unsigned long freq = 0;
> + struct omap_opp *c_opp, *min_opp, *max_opp;
> + unsigned long vc, vt;
> +
> + min_opp = opp_find_freq_ceil(OPP_L3, &freq);
> + freq = ULONG_MAX;
> + max_opp = opp_find_freq_floor(OPP_L3, &freq);
> + c_vdd2_opp = c_opp = opp_find_freq_exact(OPP_L3, l3_clk->rate, true);
> +
> + if (opp_get_freq(c_opp) == opp_get_freq(min_opp)) {
> + vc = opp_get_voltage(c_opp);
> + vt = opp_get_voltage(max_opp);
> + ret = omap_voltage_scale(VDD2_OPP, vt, vc);
> + } else {
> + freq = opp_get_freq(min_opp);
> + lock_scratchpad_sem();
> + div = cm_read_mod_reg(CORE_MOD, CM_CLKSEL) &
> + OMAP3430_CLKSEL_L3_MASK;
> + ret = clk_set_rate(dpll3_clk, freq * div);
> +#ifdef CONFIG_PM
> + omap3_save_scratchpad_contents();
> +#endif
> + unlock_scratchpad_sem();
> + }
> +
> + return ret;
> +}
> +
> +int reprogram_vdd2_opp_3630()
> +{
> + int ret = 0, div;
> + unsigned long freq = 0;
> + struct omap_opp *c_opp, *min_opp, *max_opp;
> + u8 vc, vt;
> +
> + min_opp = opp_find_freq_ceil(OPP_L3, &freq);
> + freq = ULONG_MAX;
> + max_opp = opp_find_freq_floor(OPP_L3, &freq);
> + c_opp = opp_find_freq_exact(OPP_L3, l3_clk->rate, true);
> +
> + if (opp_get_freq(c_opp) == opp_get_freq(c_vdd2_opp)) {
> + vc = opp_get_voltage(max_opp);
> + vt = opp_get_voltage(c_vdd2_opp);
> +
> + /* ok to scale.. */
> + ret = omap_voltage_scale(VDD2_OPP, vt, vc);
> + } else {
> + freq = opp_get_freq(max_opp);
> + div = cm_read_mod_reg(CORE_MOD, CM_CLKSEL) &
> + OMAP3430_CLKSEL_L3_MASK;
> + ret = clk_set_rate(dpll3_clk, freq * div);
> + }
> +
> + return ret;
> +}
> +
Cheers,
Peter.
--
goa is a state of mind
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
