> -----Original Message----- > From: Hiremath, Vaibhav > Sent: Sunday, April 25, 2010 8:58 PM > To: Y, Kishore; Tomi Valkeinen > Cc: linux-omap@vger.kernel.org > Subject: RE: [PATCH 1/2 V5] OMAP: DSS: Add display board file for zoom > boards > > > -----Original Message----- > > From: linux-omap-ow...@vger.kernel.org [mailto:linux-omap- > > ow...@vger.kernel.org] On Behalf Of Y, Kishore > > Sent: Sunday, April 25, 2010 2:00 PM > > To: Tomi Valkeinen > > Cc: linux-omap@vger.kernel.org > > Subject: [PATCH 1/2 V5] OMAP: DSS: Add display board file for zoom > boards > > > > > > board-zoom-display.c added as a common file for display fucntionality > > on boards zoom2, zoom3 and 3630sdp > > > > Signed-off-by: Mukund Mittal <mmit...@ti.com> > > Signed-off-by: Kishore Y <kishor...@ti.com> > > Reviewed-by: Gadiyar, Anand <gadi...@ti.com> > > --- > > arch/arm/mach-omap2/Makefile | 3 + > > arch/arm/mach-omap2/board-zoom-display.c | 158 > > +++++++++++++++++++++++++ > > arch/arm/mach-omap2/board-zoom-peripherals.c | 48 ++++++++- > > arch/arm/mach-omap2/include/mach/board-zoom.h | 3 + > > 4 files changed, 211 insertions(+), 1 deletions(-) > > create mode 100644 arch/arm/mach-omap2/board-zoom-display.c > > > > diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile > > index 4b9fc57..69f7d2f 100644 > > --- a/arch/arm/mach-omap2/Makefile > > +++ b/arch/arm/mach-omap2/Makefile > > @@ -124,14 +124,17 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board- > rx51.o > > \ > > board-rx51-peripherals.o \ > > hsmmc.o > > obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \ > > + board-zoom-display.o \ > > board-zoom-peripherals.o \ > > hsmmc.o \ > > board-zoom-debugboard.o > > obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom3.o \ > > + board-zoom-display.o \ > > board-zoom-peripherals.o \ > > hsmmc.o \ > > board-zoom-debugboard.o > > obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \ > > + board-zoom-display.o \ > > board-zoom-peripherals.o \ > > hsmmc.o > > obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ > > diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach- > > omap2/board-zoom-display.c > > new file mode 100644 > > index 0000000..59c98f4 > > --- /dev/null > > +++ b/arch/arm/mach-omap2/board-zoom-display.c > > @@ -0,0 +1,158 @@ > > +/* > > + * Copyright (C) 2010 Texas Instruments Inc. > > + * > > + * Modified from mach-omap2/board-zoom-peripherals.c > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + */ > > + > > +#include <linux/kernel.h> > > +#include <linux/init.h> > > +#include <linux/platform_device.h> > > +#include <linux/gpio.h> > > +#include <linux/i2c/twl.h> > > +#include <linux/spi/spi.h> > > +#include <plat/common.h> > > +#include <plat/control.h> > > +#include <plat/mcspi.h> > > +#include <plat/display.h> > > + > > +#define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES) > > +#define LCD_PANEL_RESET_GPIO_PROD 96 > > +#define LCD_PANEL_RESET_GPIO_PILOT 55 > > +#define LCD_PANEL_QVGA_GPIO 56 > > +#define TV_PANEL_ENABLE_GPIO 95 > > + > > +static void zoom_lcd_tv_panel_init(void) > > +{ > > + int ret; > > + unsigned char lcd_panel_reset_gpio; > > + > > + lcd_panel_reset_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? > > + LCD_PANEL_RESET_GPIO_PROD : > > + LCD_PANEL_RESET_GPIO_PILOT; > > + > > + ret = gpio_request(lcd_panel_reset_gpio, "lcd reset"); > > + if (ret) { > > + pr_err("Failed to get LCD reset GPIO (gpio%d)\n", > > + lcd_panel_reset_gpio); > > + return; > > + } > > + gpio_direction_output(lcd_panel_reset_gpio, 1); > > + > > + ret = gpio_request(LCD_PANEL_QVGA_GPIO, "lcd qvga"); > > + if (ret) { > > + pr_err("Failed to get LCD_PANEL_QVGA_GPIO (gpio%d).\n", > > + LCD_PANEL_QVGA_GPIO); > > + goto err0; > > + } > > + gpio_direction_output(LCD_PANEL_QVGA_GPIO, 1); > > + > > + ret = gpio_request(TV_PANEL_ENABLE_GPIO, "tv panel"); > > + if (ret) { > > + pr_err("Failed to get TV_PANEL_ENABLE_GPIO (gpio%d).\n", > > + TV_PANEL_ENABLE_GPIO); > > + goto err1; > > + } > > + gpio_direction_output(TV_PANEL_ENABLE_GPIO, 0); > [Hiremath, Vaibhav] I think, by default you should disable all the panel > control signals and driver code should take care of enabling > default/selected panel. > > Say for example, if you choose the default output to TV from bootargs, the > LCD enable GPIO is going to high (1) irrespective of whether the default > output is LCD or not. > Actually I have turned on all the gpio pins at bootup (0 is enable for tv) Might not be a good idea as you suggested. I will correct this and send out the next version
Regards Kishore > > + > > + return; > > + > > +err1: > > + gpio_free(LCD_PANEL_QVGA_GPIO); > > +err0: > > + gpio_free(lcd_panel_reset_gpio); > > +} > > + > > +static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev) > > +{ > > + gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1); > > + > > + return 0; > > +} > > + > > +static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev) > > +{ > > + gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0); > > +} > > + > > +static int zoom_panel_enable_tv(struct omap_dss_device *dssdev) > > +{ > > + gpio_set_value(TV_PANEL_ENABLE_GPIO, 0); > > + > > + return 0; > > +} > > + > > +static void zoom_panel_disable_tv(struct omap_dss_device *dssdev) > > +{ > > + gpio_set_value(TV_PANEL_ENABLE_GPIO, 1); > > +} > > + > > +static struct omap_dss_device zoom_lcd_device = { > > + .name = "lcd", > > + .driver_name = "NEC_8048_panel", > > + .type = OMAP_DISPLAY_TYPE_DPI, > > + .phy.dpi.data_lines = 24, > > + .platform_enable = zoom_panel_enable_lcd, > > + .platform_disable = zoom_panel_disable_lcd, > > +}; > > + > > +static struct omap_dss_device zoom_tv_device = { > > + .name = "tv", > > + .driver_name = "venc", > > + .type = OMAP_DISPLAY_TYPE_VENC, > > + .phy.venc.type = -1, > > + .platform_enable = zoom_panel_enable_tv, > > + .platform_disable = zoom_panel_disable_tv, > > +}; > > + > > +static struct omap_dss_device *zoom_dss_devices[] = { > > + &zoom_lcd_device, > > + &zoom_tv_device, > > +}; > > + > > +static struct omap_dss_board_info zoom_dss_data = { > > + .num_devices = ARRAY_SIZE(zoom_dss_devices), > > + .devices = zoom_dss_devices, > > + .default_device = &zoom_lcd_device, > > +}; > > + > > +static struct platform_device zoom_dss_device = { > > + .name = "omapdss", > > + .id = -1, > > + .dev = { > > + .platform_data = &zoom_dss_data, > > + }, > > +}; > > + > > +static struct omap2_mcspi_device_config dss_lcd_mcspi_config = { > > + .turbo_mode = 1, > > + .single_channel = 1, /* 0: slave, 1: master */ > > +}; > > + > > +static struct spi_board_info nec_8048_spi_board_info[] __initdata = { > > + [0] = { > > + .modalias = "nec_8048_spi", > > + .bus_num = 1, > > + .chip_select = 2, > > + .max_speed_hz = 375000, > > + .controller_data = &dss_lcd_mcspi_config, > > + }, > > +}; > > + > > +static struct platform_device *zoom_display_devices[] __initdata = { > > + &zoom_dss_device, > > +}; > > + > > +void __init zoom_display_init(enum omap_dss_venc_type venc_type) > > +{ > > + zoom_tv_device.phy.venc.type = venc_type; > > + platform_add_devices(zoom_display_devices, > > + ARRAY_SIZE(zoom_display_devices)); > > + spi_register_board_info(nec_8048_spi_board_info, > > + ARRAY_SIZE(nec_8048_spi_board_info)); > > + zoom_lcd_tv_panel_init(); > > +} > > + > > diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c > b/arch/arm/mach- > > omap2/board-zoom-peripherals.c > > index 6b39849..0dfa7c7 100644 > > --- a/arch/arm/mach-omap2/board-zoom-peripherals.c > > +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c > > @@ -27,6 +27,8 @@ > > #include "mux.h" > > #include "hsmmc.h" > > > > +#define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES) > > + > > /* Zoom2 has Qwerty keyboard*/ > > static int board_keymap[] = { > > KEY(0, 0, KEY_E), > > @@ -171,9 +173,43 @@ static struct omap2_hsmmc_info mmc[] __initdata = { > > {} /* Terminator */ > > }; > > > > +static struct regulator_consumer_supply zoom_vpll2_supply = > > + REGULATOR_SUPPLY("vdds_dsi", "omapdss"); > > + > > +static struct regulator_consumer_supply zoom_vdda_dac_supply = > > + REGULATOR_SUPPLY("vdda_dac", "omapdss"); > > + > > +static struct regulator_init_data zoom_vpll2 = { > > + .constraints = { > > + .min_uV = 1800000, > > + .max_uV = 1800000, > > + .valid_modes_mask = REGULATOR_MODE_NORMAL > > + | REGULATOR_MODE_STANDBY, > > + .valid_ops_mask = REGULATOR_CHANGE_MODE > > + | REGULATOR_CHANGE_STATUS, > > + }, > > + .num_consumer_supplies = 1, > > + .consumer_supplies = &zoom_vpll2_supply, > > +}; > > + > > +static struct regulator_init_data zoom_vdac = { > > + .constraints = { > > + .min_uV = 1800000, > > + .max_uV = 1800000, > > + .valid_modes_mask = REGULATOR_MODE_NORMAL > > + | REGULATOR_MODE_STANDBY, > > + .valid_ops_mask = REGULATOR_CHANGE_MODE > > + | REGULATOR_CHANGE_STATUS, > > + }, > > + .num_consumer_supplies = 1, > > + .consumer_supplies = &zoom_vdda_dac_supply, > > +}; > > + > > static int zoom_twl_gpio_setup(struct device *dev, > > unsigned gpio, unsigned ngpio) > > { > > + int ret; > > + > > /* gpio + 0 is "mmc0_cd" (input/IRQ) */ > > mmc[0].gpio_cd = gpio + 0; > > omap2_hsmmc_init(mmc); > > @@ -185,7 +221,15 @@ static int zoom_twl_gpio_setup(struct device *dev, > > zoom_vsim_supply.dev = mmc[0].dev; > > zoom_vmmc2_supply.dev = mmc[1].dev; > > > > - return 0; > > + ret = gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd enable"); > > + if (ret) { > > + pr_err("Failed to get LCD_PANEL_ENABLE_GPIO (gpio%d).\n", > > + LCD_PANEL_ENABLE_GPIO); > > + return ret; > > + } > > + gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 1); > > + > [Hiremath, Vaibhav] Ditto here. > > + return ret; > > } > > > > > > @@ -243,6 +287,8 @@ static struct twl4030_platform_data zoom_twldata = { > > .vmmc1 = &zoom_vmmc1, > > .vmmc2 = &zoom_vmmc2, > > .vsim = &zoom_vsim, > > + .vpll2 = &zoom_vpll2, > > + .vdac = &zoom_vdac, > > > > }; > > > > diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h > b/arch/arm/mach- > > omap2/include/mach/board-zoom.h > > index c93b29e..aec73b4 100644 > > --- a/arch/arm/mach-omap2/include/mach/board-zoom.h > > +++ b/arch/arm/mach-omap2/include/mach/board-zoom.h > > @@ -1,5 +1,8 @@ > > /* > > * Defines for zoom boards > > */ > > +#include <plat/display.h> > > + > > extern int __init zoom_debugboard_init(void); > > extern void __init zoom_peripherals_init(void); > > +extern void __init zoom_display_init(enum omap_dss_venc_type > venc_type); > > -- > > 1.5.6.3 > > > > > > Regards, > > Kishore Y > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > > the body of a message to majord...@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html