* Kevin Hilman <khil...@deeprootsystems.com> [100421 11:59]:
> From: Kalle Jokiniemi <kalle.jokini...@digia.com>
>
> While waiting for completion of the i2c transfer, the
> MPU could hit OFF mode and cause several msecs of
> delay that made i2c transfers fail more often. The
> extra delays and subsequent re-trys cause i2c clocks
> to be active more often. This has also an negative
> effect on power consumption.
>
> Created a mechanism for passing and using the
> constraint setting function in driver code. The used
> mpu wake up latency constraints are now set individually
> per bus, and they are calculated based on clock rate
> and fifo size.
>
> Thanks to Jarkko Nikula, Moiz Sonasath, Paul Walmsley,
> and Nishanth Menon for tuning out the details of
> this patch.
<snip>
> +#ifdef CONFIG_ARCH_OMAP3
> +/*
> + * omap_i2c_set_wfc_mpu_wkup_lat - sets mpu wake up constraint
> + * @dev: i2c bus device pointer
> + * @val: latency constraint to set, -1 to disable constraint
> + *
> + * When waiting for completion of a i2c transfer, we need to set a wake up
> + * latency constraint for the MPU. This is to ensure quick enough wakeup from
> + * idle, when transfer completes.
> + */
> +static void omap_i2c_set_wfc_mpu_wkup_lat(struct device *dev, int val)
> +{
> + omap_pm_set_max_mpu_wakeup_lat(dev, val);
> +}
> +#endif
> +
> +static void __init omap_set_i2c_constraint_func(
> + struct omap_i2c_bus_platform_data *pd)
> +{
> + if (cpu_is_omap34xx())
> + pd->set_mpu_wkup_lat = omap_i2c_set_wfc_mpu_wkup_lat;
> + else
> + pd->set_mpu_wkup_lat = NULL;
> +}
> +
> static int __init omap_i2c_nr_ports(void)
> {
> int ports = 0;
<snip>
> @@ -161,9 +189,10 @@ static int __init omap_register_i2c_bus_cmdline(void)
> {
> int i, err = 0;
>
> - for (i = 0; i < ARRAY_SIZE(i2c_rate); i++)
> - if (i2c_rate[i] & OMAP_I2C_CMDLINE_SETUP) {
> - i2c_rate[i] &= ~OMAP_I2C_CMDLINE_SETUP;
> + for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++)
> + if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) {
> + i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
> + omap_set_i2c_constraint_func(&i2c_pdata[i]);
> err = omap_i2c_add_bus(i + 1);
> if (err)
> goto out;
> @@ -197,9 +226,11 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
> return err;
> }
>
> - if (!i2c_rate[bus_id - 1])
> - i2c_rate[bus_id - 1] = clkrate;
> - i2c_rate[bus_id - 1] &= ~OMAP_I2C_CMDLINE_SETUP;
> + if (!i2c_pdata[bus_id - 1].clkrate)
> + i2c_pdata[bus_id - 1].clkrate = clkrate;
> +
> + omap_set_i2c_constraint_func(&i2c_pdata[bus_id - 1]);
> + i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
>
> return omap_i2c_add_bus(bus_id);
> }
Looks like this all could be done in omap_i2c_add_bus a bit simpler.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
