If we are softbooting another kernel using kexec, DMA controller state is not
known when we are performing omap_init_dma(). It is possible that some DMA
channels are already active. For example after kexec we get:
<4>IRQ 0020 for non-allocated DMAchannel 5
<4>IRQ 0020 for non-allocated DMAchannel 5
<4>IRQ 0020 for non-allocated DMAchannel 5
<4>IRQ 0020 for non-allocated DMAchannel 5
<4>IRQ 0020 for non-allocated DMAchannel 5
To prevent any weird things happening, we perform soft reset for the controller
and disable all per channel interrupts.
Signed-off-by: Mika Westerberg <ext-mika.1.westerb...@nokia.com>
---
arch/arm/plat-omap/dma.c | 32 ++++++++++++++++++++++++++++++++
arch/arm/plat-omap/include/plat/dma.h | 4 ++++
2 files changed, 36 insertions(+), 0 deletions(-)
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 1d95996..24cbb97 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2024,6 +2024,31 @@ void omap_dma_global_context_restore(void)
/*----------------------------------------------------------------------------*/
+/**
+ * omap_dma_reset() - perform software reset for the DMA controller
+ */
+static void omap_dma_reset(void)
+{
+ u32 v;
+
+ if (cpu_class_is_omap1())
+ return;
+
+ v = dma_read(OCP_SYSCONFIG);
+ v |= 0x2; /* software reset */
+ dma_write(v, OCP_SYSCONFIG);
+
+ /* wait until reset is complete */
+ while ((dma_read(SYSSTATUS) & 0x1) == 0)
+ cpu_relax();
+
+ /* disable per channel interrupts */
+ dma_write(0, IRQENABLE_L0);
+ dma_write(0, IRQENABLE_L1);
+ dma_write(0, IRQENABLE_L2);
+ dma_write(0, IRQENABLE_L3);
+}
+
static int __init omap_init_dma(void)
{
unsigned long base;
@@ -2069,6 +2094,13 @@ static int __init omap_init_dma(void)
}
}
+ /*
+ * Make sure that DMA is in reset state before doing anything else. If
+ * we are coming from softboot (e.g kexec) DMA is probably configured so
+ * we explicitly reset it here to get into known state.
+ */
+ omap_dma_reset();
+
if (cpu_is_omap15xx()) {
printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
dma_chan_count = 9;
diff --git a/arch/arm/plat-omap/include/plat/dma.h
b/arch/arm/plat-omap/include/plat/dma.h
index 02232ca..9a55504 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -134,6 +134,10 @@
#define OMAP1_DMA_REVISION 0
#define OMAP1_DMA_IRQSTATUS_L0 0
#define OMAP1_DMA_IRQENABLE_L0 0
+#define OMAP1_DMA_IRQENABLE_L1 0
+#define OMAP1_DMA_IRQENABLE_L2 0
+#define OMAP1_DMA_IRQENABLE_L3 0
+#define OMAP1_DMA_SYSSTATUS 0
#define OMAP1_DMA_OCP_SYSCONFIG 0
#define OMAP_DMA4_HW_ID 0
#define OMAP_DMA4_CAPS_0_L 0
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
