IO events can also come from GPIO modules, which reside in the PER domain.
It is possible for the PER to enter RET while CORE is still in ON.
If GPIO 2-6 are enabled for IO-pad wakeups, the PER domain will not
wakeup in this case, unless we enable it.
Signed-off-by: Mike Chan <m...@android.com>
---
arch/arm/mach-omap2/pm34xx.c | 16 +++++++++++-----
1 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index ea0000b..fd76b0d 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -371,9 +371,16 @@ void omap_sram_idle(void)
if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
pwrdm_set_next_pwrst(neon_pwrdm, mpu_next_state);
- /* PER */
+ /* Enable IO-PAD and IO-CHAIN wakeups */
per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
+ if (per_next_state < PWRDM_POWER_ON ||
+ core_next_state < PWRDM_POWER_ON) {
+ prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
+ omap3_enable_io_chain();
+ }
+
+ /* PER */
if (per_next_state < PWRDM_POWER_ON) {
omap_uart_prepare_idle(2);
omap2_gpio_prepare_for_retention();
@@ -398,10 +405,8 @@ void omap_sram_idle(void)
omap3_core_save_context();
omap3_prcm_save_context();
}
- /* Enable IO-PAD and IO-CHAIN wakeups */
- prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
- omap3_enable_io_chain();
}
+
omap3_intc_prepare_idle();
/*
@@ -463,7 +468,8 @@ void omap_sram_idle(void)
}
/* Disable IO-PAD and IO-CHAIN wakeup */
- if (core_next_state < PWRDM_POWER_ON) {
+ if (per_next_state < PWRDM_POWER_ON ||
+ core_next_state < PWRDM_POWER_ON) {
prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
omap3_disable_io_chain();
}
--
1.7.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
