> -----Original Message-----
> From: svenk...@gmail.com [mailto:svenk...@gmail.com] On Behalf Of Venkatraman
> S
> Sent: Thursday, April 29, 2010 11:05 PM
> To: linux-omap@vger.kernel.org; linux-...@vger.kernel.org;
> linux-arm-ker...@lists.arm.linux.org.uk
> Cc: Chikkature Rajashekar, Madhusudhan; Adrian Hunter; Kadiyala, Kishore;
> Shilimkar, Santosh; Tony
> Lindgren
> Subject: [PATCH v8 2/2] omap hsmmc: adaptation of sdma descriptor autoloading
> feature
>
> From 1c63dd42fc6c563c931168779ce73401332faa52 Mon Sep 17 00:00:00 2001
> From: Venkatraman S <svenk...@ti.com>
> Date: Thu, 29 Apr 2010 22:43:31 +0530
> Subject: [PATCH 2/2] omap hsmmc: adaptation of sdma descriptor
> autoloading feature
>
> Start to use the sDMA descriptor autoloading feature.
> For large datablocks, the MMC driver has to repeatedly setup,
> program and teardown the dma channel for each element of the
> sglist received in omap_hsmmc_request.
>
> By using descriptor autoloading, transfers from / to each element of
> the sglist is pre programmed into a linked list. The sDMA driver
> completes the entire transaction and provides a single interrupt.
>
> Due to this, number of dma interrupts for a typical 100MB transfer on the MMC
> is
> reduced from 25000 to about 400 (approximate). Transfer speeds are
> improved by ~5%.
> (Though it varies on the size of read / write & improves on huge transfers)
>
> Descriptor autoloading is available only in 3630 and 4430 (as of now).
> Hence normal DMA mode is also retained.
>
> Signed-off-by: Venkatraman S <svenk...@ti.com>
> CC: Adrian Hunter <adrian.hun...@nokia.com>
> CC: Madhusudhan C <madhu...@ti.com>
> CC: Shilimkar Santosh <santosh.shilim...@ti.com>
> CC: Tony Lindgren <t...@atomide.com>
> ---
> Changes since previous version
> * Rebased to Adrian Hunter's interrupt syncronisation patch
> https://patchwork.kernel.org/patch/94670/
> * Rename ICR name definition
> drivers/mmc/host/omap_hsmmc.c | 148 ++++++++++++++++++++++++++++++++++------
> 1 files changed, 125 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index 65093d4..095fd94 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -102,6 +102,8 @@
> #define SRD (1 << 26)
> #define SOFTRESET (1 << 1)
> #define RESETDONE (1 << 0)
> +/* End of superblock indicator for sglist transfers */
> +#define DMA_ICR_SGLIST_END 0x4D00
>
> /*
> * FIXME: Most likely all the data using these _DEVID defines should come
> @@ -118,6 +120,12 @@
> #define OMAP_MMC_MASTER_CLOCK 96000000
> #define DRIVER_NAME "mmci-omap-hs"
>
> +#define DMA_TYPE_NODMA 0
" DMA_TYPE_NODMA" doesn't make sense
> +#define DMA_TYPE_SDMA 1
> +#define DMA_TYPE_SDMA_DLOAD 2
How about ??
#define TRANSFER_NODMA 0
#define TRANSFER_SDMA_NORMAL 1
#define TRANSFER_SDMA_DESCRIPTOR 2
I think ADMA is also in pipeline, so it can become then
#define TRANSFER_ADMA_DESCRIPTOR 3
> +
> +#define DMA_CTRL_BUF_SIZE (PAGE_SIZE * 3)
> +
> /* Timeouts for entering power saving states on inactivity, msec */
> #define OMAP_MMC_DISABLED_TIMEOUT 100
> #define OMAP_MMC_SLEEP_TIMEOUT 1000
> @@ -170,7 +178,11 @@ struct omap_hsmmc_host {
> u32 bytesleft;
> int suspended;
> int irq;
> - int use_dma, dma_ch;
> + int dma_caps;
> + int dma_in_use;
This flag isn't necessary. What you are doing is
just renaming it. Can't you avoid that ??
Inudertand the intent behind "dma_in_use " instead
of "use_dma", but you can surely avoid this change.
> + int dma_ch;
> + void *dma_ctrl_buf;
> + dma_addr_t dma_ctrl_buf_phy;
> int dma_line_tx, dma_line_rx;
> int slot_id;
> int got_dbclk;
> @@ -527,7 +539,7 @@ static void omap_hsmmc_enable_irq(struct
> omap_hsmmc_host *host)
> {
> unsigned int irq_mask;
>
> - if (host->use_dma)
> + if (host->dma_in_use)
This will go with no flag change.
> irq_mask = INT_EN_MASK & ~(BRR_ENABLE | BWR_ENABLE);
> else
> irq_mask = INT_EN_MASK;
> @@ -813,7 +825,7 @@ omap_hsmmc_start_command(struct omap_hsmmc_host
> *host, struct mmc_command *cmd,
> cmdreg &= ~(DDIR);
> }
>
> - if (host->use_dma)
> + if (host->dma_in_use)
ditto
> cmdreg |= DMA_EN;
>
> host->req_in_progress = 1;
> @@ -842,7 +854,7 @@ static void omap_hsmmc_request_done(struct
> omap_hsmmc_host *host, struct mmc_req
>
> omap_hsmmc_disable_irq(host);
> /* Do not complete the request if DMA is still in progress */
> - if (mrq->data && host->use_dma && dma_ch != -1)
> + if (mrq->data && host->dma_in_use && dma_ch != -1)
ditto
> return;
> host->mrq = NULL;
> mmc_request_done(host->mmc, mrq);
> @@ -920,7 +932,7 @@ static void omap_hsmmc_dma_cleanup(struct
> omap_hsmmc_host *host, int errno)
> host->dma_ch = -1;
> spin_unlock(&host->irq_lock);
>
> - if (host->use_dma && dma_ch != -1) {
> + if (host->dma_in_use && dma_ch != -1) {
ditto
> dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len,
> omap_hsmmc_get_dma_dir(host, host->data));
> omap_free_dma(dma_ch);
> @@ -1266,7 +1278,6 @@ static void omap_hsmmc_config_dma_params(struct
> omap_hsmmc_host *host,
> omap_hsmmc_get_dma_sync_dev(host, data),
> !(data->flags & MMC_DATA_WRITE));
>
> - omap_start_dma(dma_ch);
> }
>
> /*
> @@ -1279,21 +1290,23 @@ static void omap_hsmmc_dma_cb(int lch, u16
> ch_status, void *cb_data)
> int dma_ch, req_in_progress;
>
> if (ch_status & OMAP2_DMA_MISALIGNED_ERR_IRQ)
> - dev_dbg(mmc_dev(host->mmc), "MISALIGNED_ADRS_ERR\n");
> + dev_dbg(mmc_dev(host->mmc), "Misaligned address error\n");
>
> spin_lock(&host->irq_lock);
> if (host->dma_ch < 0) {
> spin_unlock(&host->irq_lock);
> return;
> }
> -
> - host->dma_sg_idx++;
> - if (host->dma_sg_idx < host->dma_len) {
> - /* Fire up the next transfer. */
> - omap_hsmmc_config_dma_params(host, data,
> + if (host->dma_in_use == DMA_TYPE_SDMA) {
> + host->dma_sg_idx++;
> + if (host->dma_sg_idx < host->dma_len) {
> + /* Fire up the next transfer. */
> + omap_hsmmc_config_dma_params(host, data,
> data->sg + host->dma_sg_idx);
> - spin_unlock(&host->irq_lock);
> - return;
> + omap_start_dma(host->dma_ch);
> + spin_unlock(&host->irq_lock);
> + return;
> + }
> }
>
> dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
> @@ -1315,10 +1328,19 @@ static void omap_hsmmc_dma_cb(int lch, u16
> ch_status, void *cb_data)
> }
> }
>
> +static int omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host)
> +{
> + if (host->dma_in_use == DMA_TYPE_SDMA)
> + omap_start_dma(host->dma_ch);
> + else if (host->dma_in_use == DMA_TYPE_SDMA_DLOAD)
> + return omap_start_dma_sglist_transfers(host->dma_ch, -1);
Instead of "-1" , some macro for "NO_PAUSE" would have been better.
> +
> + return 0;
> +}
> /*
> - * Routine to configure and start DMA for the MMC card
> + * Routine to configure DMA for the MMC card
> */
> -static int omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host,
> +static int omap_hsmmc_configure_sdma(struct omap_hsmmc_host *host,
> struct mmc_request *req)
> {
> int dma_ch = 0, ret = 0, i;
> @@ -1359,6 +1381,56 @@ static int omap_hsmmc_start_dma_transfer(struct
> omap_hsmmc_host *host,
> return 0;
> }
>
> +static int omap_hsmmc_configure_sdma_sglist(struct omap_hsmmc_host *host,
> + struct mmc_request *req)
> +{
> + int i;
> + struct omap_dma_sglist_node *sglist, *snode;
> + struct mmc_data *data = req->data;
> + int blksz;
> + int dmadir = omap_hsmmc_get_dma_dir(host, data);
> + struct omap_dma_sglist_type2a_params *t2p;
> +
> + sglist = (struct omap_dma_sglist_node *) host->dma_ctrl_buf;
> + snode = sglist;
> + blksz = host->data->blksz;
> +
> + if ((host->dma_len * sizeof(*snode)) > DMA_CTRL_BUF_SIZE) {
> + dev_err(mmc_dev(host->mmc), "not enough sglist memory %d\n",
> + host->dma_len);
> + return -ENOMEM;
> + }
> + for (i = 0; i < host->dma_len; snode++, i++) {
> + snode->desc_type = OMAP_DMA_SGLIST_DESCRIPTOR_TYPE2a;
> + snode->num_of_elem = blksz / 4;
> + t2p = &snode->sg_node.t2a;
> +
> + if (dmadir == DMA_FROM_DEVICE) {
> + t2p->src_addr = host->mapbase + OMAP_HSMMC_DATA;
> + t2p->dst_addr = sg_dma_address(data->sg + i);
> + } else {
> + t2p->dst_addr = host->mapbase + OMAP_HSMMC_DATA;
> + t2p->src_addr = sg_dma_address(data->sg + i);
> + }
> + snode->flags =
> + OMAP_DMA_LIST_DST_VALID | OMAP_DMA_LIST_SRC_VALID;
> +
> + t2p->cfn_fn = sg_dma_len(data->sg + i) / host->data->blksz;
> + t2p->cicr = DMA_ICR_SGLIST_END;
> +
> + t2p->dst_frame_idx_or_pkt_size = 0;
> + t2p->src_frame_idx_or_pkt_size = 0;
> + t2p->dst_elem_idx = 0;
> + t2p->src_elem_idx = 0;
> + }
> + dev_dbg(mmc_dev(host->mmc), "new sglist %x len =%d\n",
> + host->dma_ctrl_buf_phy, i);
> + omap_set_dma_sglist_mode(host->dma_ch, sglist,
> + host->dma_ctrl_buf_phy, i, NULL);
> + omap_dma_set_sglist_fastmode(host->dma_ch, 1);
You should check for return value of above two. If any one of above fails
the transfer will fail BADLY
> + return 0;
> +}
> +
> static void set_data_timeout(struct omap_hsmmc_host *host,
> unsigned int timeout_ns,
> unsigned int timeout_clks)
> @@ -1420,14 +1492,23 @@ omap_hsmmc_prepare_data(struct omap_hsmmc_host
> *host, struct mmc_request *req)
> | (req->data->blocks << 16));
> set_data_timeout(host, req->data->timeout_ns, req->data->timeout_clks);
>
> - if (host->use_dma) {
> - ret = omap_hsmmc_start_dma_transfer(host, req);
> - if (ret != 0) {
> - dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n");
> + if (host->dma_caps & DMA_TYPE_SDMA) {
> + ret = omap_hsmmc_configure_sdma(host, req);
> + if (ret)
> return ret;
> - }
> + host->dma_in_use = DMA_TYPE_SDMA;
> }
> - return 0;
> + if ((host->dma_caps & DMA_TYPE_SDMA_DLOAD) &&
> + host->data->sg_len > 4) {
> + ret = omap_hsmmc_configure_sdma_sglist(host, req);
> + if (ret)
> + return ret;
> + host->dma_in_use = DMA_TYPE_SDMA_DLOAD;
> +
> + }
> + ret = omap_hsmmc_start_dma_transfer(host);
> + return ret;
> +
> }
>
> /*
> @@ -2007,7 +2088,9 @@ static int __init omap_hsmmc_probe(struct
> platform_device *pdev)
> host->mmc = mmc;
> host->pdata = pdata;
> host->dev = &pdev->dev;
> - host->use_dma = 1;
> + host->dma_caps = DMA_TYPE_SDMA;
> + host->dma_in_use = DMA_TYPE_NODMA;
> + host->dma_ctrl_buf = NULL;
> host->dev->dma_mask = &pdata->dma_mask;
> host->dma_ch = -1;
> host->irq = irq;
> @@ -2088,6 +2171,15 @@ static int __init omap_hsmmc_probe(struct
> platform_device *pdev)
> " clk failed\n");
> }
>
> + if (cpu_is_omap44xx() || cpu_is_omap3630()) {
Can we avoid above by passing this part of platform data??
devices.c
> + host->dma_ctrl_buf = dma_alloc_coherent(NULL,
> + DMA_CTRL_BUF_SIZE,
> + &host->dma_ctrl_buf_phy,
> + 0);
> + if (host->dma_ctrl_buf != NULL)
> + host->dma_caps |= DMA_TYPE_SDMA_DLOAD;
> + }
> +
> /* Since we do only SG emulation, we can have as many segs
> * as we want. */
Not your patch but above commenting style isn't right
> mmc->max_phys_segs = 1024;
> @@ -2213,6 +2305,10 @@ err_reg:
> err_irq_cd_init:
> free_irq(host->irq, host);
> err_irq:
> + if (host->dma_ctrl_buf)
> + dma_free_coherent(NULL, DMA_CTRL_BUF_SIZE,
> + host->dma_ctrl_buf,
> + host->dma_ctrl_buf_phy);
> mmc_host_disable(host->mmc);
> clk_disable(host->iclk);
> clk_put(host->fclk);
> @@ -2240,6 +2336,12 @@ static int omap_hsmmc_remove(struct
> platform_device *pdev)
> if (host) {
> mmc_host_enable(host->mmc);
> mmc_remove_host(host->mmc);
> +
> + if (host->dma_ctrl_buf != NULL) {
> + dma_free_coherent(NULL, DMA_CTRL_BUF_SIZE,
> + host->dma_ctrl_buf,
> + host->dma_ctrl_buf_phy);
> + }
> if (host->use_reg)
> omap_hsmmc_reg_put(host);
> if (host->pdata->cleanup)
> --
> 1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
