Hi, > -----Original Message----- > From: linux-omap-ow...@vger.kernel.org [mailto:linux-omap- > ow...@vger.kernel.org] On Behalf Of Gupta, Ajay Kumar > Sent: Thursday, May 13, 2010 5:15 PM > To: Kevin Hilman > Cc: linux-omap@vger.kernel.org > Subject: RE: [PATCH] OMAP3: PM: fix AM35x musb issue with AUTOIDLE bit in > CONTROL_SYSCONFIG > > Hi, > Kumar Gupta <ajay.gu...@ti.com> writes: > > > > > MUSB interface on AM35x stops working when we set AUTOIDLE bit (D0) in > > > CONTROL_SYSCONFIG(0x48002010) register. > > > > why? > > > > stops working in what way? > > > > I think you need to investigate more into why this is happening. > > > > There is 'turnaround/timeout' error shown in first SETUP packet on > USB bus when a device is connected to OTG port. > > In second retry of SETUP packet, 8 byte of GET_DESCRIPTOR went out > Successfully but there is no 'IN token' to receive the descriptor > Data although ReqPkt is set for endpoint zero. > > All this observation shows that OTG controller starts misbehaving > When AUTOIDLE bit is set in CONTROL_SYSCONFIG register. > > > This suggest to me that something in the MUSB device/driver init > > is not quite right for these boards. > Do you have anything specific to try in init path ?
I observed OTG port to be working with plane linus's tree + AM3517 musb Support patch and without AUTOIDLE bit set so please hold on this patch For now. I will do further testing and let you know. -Ajay > > Regards, > Ajay > > > > Kevin > > > > > > > Signed-off-by: Ajay Kumar Gupta <ajay.gu...@ti.com> > > > > > > --- > > > arch/arm/mach-omap2/pm34xx.c | 7 ++++++- > > > 1 files changed, 6 insertions(+), 1 deletions(-) > > > > > > diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach- > omap2/pm34xx.c > > > index ea0000b..cc9d566 100644 > > > --- a/arch/arm/mach-omap2/pm34xx.c > > > +++ b/arch/arm/mach-omap2/pm34xx.c > > > @@ -849,7 +849,12 @@ static void __init prcm_setup_regs(void) > > > CM_AUTOIDLE); > > > } > > > > > > - omap_ctrl_writel(OMAP3430_AUTOIDLE, OMAP2_CONTROL_SYSCONFIG); > > > + /* > > > + * MUSB interface on AM35x stops working when we enable AUTOIDLE, > > > + * so avoid this for AM3517 and AM3505 device. > > > + */ > > > + if (!cpu_is_omap3517() && !cpu_is_omap3505()) > > > + omap_ctrl_writel(OMAP3430_AUTOIDLE, OMAP2_CONTROL_SYSCONFIG); > > > > > > /* > > > * Set all plls to autoidle. This is needed until autoidle is > > > -- > > > 1.6.2.4 > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html