From: Charulatha V <ch...@ti.com>
This is in prepartion for implementing GPIO as a platform device.
gpio bank's base addresses are moved from gpio.c to plat/gpio.h.
This patch also modifies omap_gpio_init() to make use of
omap_gpio_chip_init() and omap_gpio_mod_init(). omap_gpio_mod_init() does
the module init by clearing the status register and initializing the
GPIO control register. omap_gpio_chip_init() initializes the chip request,
free, get, set and other function pointers and sets the gpio irq handler.
Signed-off-by: Charulatha V <ch...@ti.com>
---
arch/arm/plat-omap/gpio.c | 235 +++++++++++++++++++++++----------------------
1 files changed, 120 insertions(+), 115 deletions(-)
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 9b7e354..3ea616a 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -190,14 +190,12 @@ struct gpio_bank {
u32 suspend_wakeup;
u32 saved_wakeup;
#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
u32 non_wakeup_gpios;
u32 enabled_non_wakeup_gpios;
u32 saved_datain;
u32 saved_fallingdetect;
u32 saved_risingdetect;
-#endif
u32 level_mask;
u32 toggle_mask;
spinlock_t lock;
@@ -1711,6 +1709,124 @@ static void __init omap_gpio_show_rev(void)
*/
static struct lock_class_key gpio_lock_class;
+static void omap_gpio_mod_init(struct gpio_bank *bank, int id)
+{
+ if (cpu_class_is_omap2()) {
+ if (cpu_is_omap44xx()) {
+ __raw_writel(0xffffffff, bank->base +
+ OMAP4_GPIO_IRQSTATUSCLR0);
+ __raw_writel(0x00000000, bank->base +
+ OMAP4_GPIO_DEBOUNCENABLE);
+ /* Initialize interface clk ungated, module enabled */
+ __raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
+ } else if (cpu_is_omap34xx()) {
+ __raw_writel(0x00000000, bank->base +
+ OMAP24XX_GPIO_IRQENABLE1);
+ __raw_writel(0xffffffff, bank->base +
+ OMAP24XX_GPIO_IRQSTATUS1);
+ __raw_writel(0x00000000, bank->base +
+ OMAP24XX_GPIO_DEBOUNCE_EN);
+
+ /* Initialize interface clk ungated, module enabled */
+ __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
+ /* Enable autoidle for the OCP interface */
+ omap_writel(1 << 0, 0x48306814);
+ } else if (cpu_is_omap24xx()) {
+ static const u32 non_wakeup_gpios[] = {
+ 0xe203ffc0, 0x08700040
+ };
+ if (id < ARRAY_SIZE(non_wakeup_gpios))
+ bank->non_wakeup_gpios = non_wakeup_gpios[id];
+
+ /* Enable autoidle for the OCP interface */
+ omap_writel(1 << 0, 0x48019010);
+ }
+ } else if (cpu_class_is_omap1()) {
+ if (bank_is_mpuio(bank))
+ __raw_writew(0xffff, bank->base
+ + OMAP_MPUIO_GPIO_MASKIT);
+ if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
+ __raw_writew(0xffff, bank->base
+ + OMAP1510_GPIO_INT_MASK);
+ __raw_writew(0x0000, bank->base
+ + OMAP1510_GPIO_INT_STATUS);
+ }
+ if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) {
+ __raw_writew(0x0000, bank->base
+ + OMAP1610_GPIO_IRQENABLE1);
+ __raw_writew(0xffff, bank->base
+ + OMAP1610_GPIO_IRQSTATUS1);
+ __raw_writew(0x0014, bank->base
+ + OMAP1610_GPIO_SYSCONFIG);
+
+ /* Enable system clock for GPIO module.
+ * The CAM_CLK_CTRL *is* really the right place. */
+ omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
+ ULPD_CAM_CLK_CTRL);
+ }
+ if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
+ __raw_writel(0xffffffff, bank->base
+ + OMAP7XX_GPIO_INT_MASK);
+ __raw_writel(0x00000000, bank->base
+ + OMAP7XX_GPIO_INT_STATUS);
+ }
+ }
+}
+
+static void __init omap_gpio_chip_init(struct gpio_bank *bank)
+{
+ int j, gpio_bank_bits = 16;
+ static int gpio;
+
+ if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX)
+ gpio_bank_bits = 32; /* 7xx has 32-bit GPIOs */
+
+ if ((bank->method == METHOD_GPIO_24XX) ||
+ (bank->method == METHOD_GPIO_44XX))
+ gpio_bank_bits = 32;
+
+ bank->mod_usage = 0;
+ /* REVISIT eventually switch from OMAP-specific gpio structs
+ * over to the generic ones
+ */
+ bank->chip.request = omap_gpio_request;
+ bank->chip.free = omap_gpio_free;
+ bank->chip.direction_input = gpio_input;
+ bank->chip.get = gpio_get;
+ bank->chip.direction_output = gpio_output;
+ bank->chip.set_debounce = gpio_debounce;
+ bank->chip.set = gpio_set;
+ bank->chip.to_irq = gpio_2irq;
+ if (bank_is_mpuio(bank)) {
+ bank->chip.label = "mpuio";
+#ifdef CONFIG_ARCH_OMAP16XX
+ bank->chip.dev = &omap_mpuio_device.dev;
+#endif
+ bank->chip.base = OMAP_MPUIO(0);
+ } else {
+ bank->chip.label = "gpio";
+ bank->chip.base = gpio;
+ gpio += gpio_bank_bits;
+ }
+ bank->chip.ngpio = gpio_bank_bits;
+
+ gpiochip_add(&bank->chip);
+
+ for (j = bank->virtual_irq_start;
+ j < bank->virtual_irq_start + gpio_bank_bits; j++) {
+ lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class);
+ set_irq_chip_data(j, bank);
+ if (bank_is_mpuio(bank))
+ set_irq_chip(j, &mpuio_irq_chip);
+ else
+ set_irq_chip(j, &gpio_irq_chip);
+ set_irq_handler(j, handle_simple_irq);
+ set_irq_flags(j, IRQF_VALID);
+ }
+ set_irq_chained_handler(bank->irq, gpio_irq_handler);
+ set_irq_data(bank->irq, bank);
+}
+
static int __init _omap_gpio_init(void)
{
int i;
@@ -1821,7 +1937,6 @@ static int __init _omap_gpio_init(void)
}
#endif
for (i = 0; i < gpio_bank_count; i++) {
- int j, gpio_count = 16;
bank = &gpio_bank[i];
spin_lock_init(&bank->lock);
@@ -1833,107 +1948,8 @@ static int __init _omap_gpio_init(void)
continue;
}
- if (bank_is_mpuio(bank))
- __raw_writew(0xffff, bank->base +
OMAP_MPUIO_GPIO_MASKIT);
- if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
- __raw_writew(0xffff, bank->base +
OMAP1510_GPIO_INT_MASK);
- __raw_writew(0x0000, bank->base +
OMAP1510_GPIO_INT_STATUS);
- }
- if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) {
- __raw_writew(0x0000, bank->base +
OMAP1610_GPIO_IRQENABLE1);
- __raw_writew(0xffff, bank->base +
OMAP1610_GPIO_IRQSTATUS1);
- __raw_writew(0x0014, bank->base +
OMAP1610_GPIO_SYSCONFIG);
- }
- if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
- __raw_writel(0xffffffff, bank->base +
OMAP7XX_GPIO_INT_MASK);
- __raw_writel(0x00000000, bank->base +
OMAP7XX_GPIO_INT_STATUS);
-
- gpio_count = 32; /* 7xx has 32-bit GPIOs */
- }
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
- if ((bank->method == METHOD_GPIO_24XX) ||
- (bank->method == METHOD_GPIO_44XX)) {
- static const u32 non_wakeup_gpios[] = {
- 0xe203ffc0, 0x08700040
- };
-
- if (cpu_is_omap44xx()) {
- __raw_writel(0xffffffff, bank->base +
- OMAP4_GPIO_IRQSTATUSCLR0);
- __raw_writew(0x0015, bank->base +
- OMAP4_GPIO_SYSCONFIG);
- __raw_writel(0x00000000, bank->base +
- OMAP4_GPIO_DEBOUNCENABLE);
- /*
- * Initialize interface clock ungated,
- * module enabled
- */
- __raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
- } else {
- __raw_writel(0x00000000, bank->base +
- OMAP24XX_GPIO_IRQENABLE1);
- __raw_writel(0xffffffff, bank->base +
- OMAP24XX_GPIO_IRQSTATUS1);
- __raw_writew(0x0015, bank->base +
- OMAP24XX_GPIO_SYSCONFIG);
- __raw_writel(0x00000000, bank->base +
- OMAP24XX_GPIO_DEBOUNCE_EN);
-
- /*
- * Initialize interface clock ungated,
- * module enabled
- */
- __raw_writel(0, bank->base +
- OMAP24XX_GPIO_CTRL);
- }
- if (cpu_is_omap24xx() &&
- i < ARRAY_SIZE(non_wakeup_gpios))
- bank->non_wakeup_gpios = non_wakeup_gpios[i];
- gpio_count = 32;
- }
-#endif
-
- bank->mod_usage = 0;
- /* REVISIT eventually switch from OMAP-specific gpio structs
- * over to the generic ones
- */
- bank->chip.request = omap_gpio_request;
- bank->chip.free = omap_gpio_free;
- bank->chip.direction_input = gpio_input;
- bank->chip.get = gpio_get;
- bank->chip.direction_output = gpio_output;
- bank->chip.set_debounce = gpio_debounce;
- bank->chip.set = gpio_set;
- bank->chip.to_irq = gpio_2irq;
- if (bank_is_mpuio(bank)) {
- bank->chip.label = "mpuio";
-#ifdef CONFIG_ARCH_OMAP16XX
- bank->chip.dev = &omap_mpuio_device.dev;
-#endif
- bank->chip.base = OMAP_MPUIO(0);
- } else {
- bank->chip.label = "gpio";
- bank->chip.base = gpio;
- gpio += gpio_count;
- }
- bank->chip.ngpio = gpio_count;
-
- gpiochip_add(&bank->chip);
-
- for (j = bank->virtual_irq_start;
- j < bank->virtual_irq_start + gpio_count; j++) {
- lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class);
- set_irq_chip_data(j, bank);
- if (bank_is_mpuio(bank))
- set_irq_chip(j, &mpuio_irq_chip);
- else
- set_irq_chip(j, &gpio_irq_chip);
- set_irq_handler(j, handle_simple_irq);
- set_irq_flags(j, IRQF_VALID);
- }
- set_irq_chained_handler(bank->irq, gpio_irq_handler);
- set_irq_data(bank->irq, bank);
+ omap_gpio_mod_init(bank, i);
+ omap_gpio_chip_init(bank);
if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
sprintf(clk_name, "gpio%d_dbck", i + 1);
@@ -1943,17 +1959,6 @@ static int __init _omap_gpio_init(void)
}
}
- /* Enable system clock for GPIO module.
- * The CAM_CLK_CTRL *is* really the right place. */
- if (cpu_is_omap16xx())
- omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
ULPD_CAM_CLK_CTRL);
-
- /* Enable autoidle for the OCP interface */
- if (cpu_is_omap24xx())
- omap_writel(1 << 0, 0x48019010);
- if (cpu_is_omap34xx())
- omap_writel(1 << 0, 0x48306814);
-
omap_gpio_show_rev();
return 0;
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
