introduce silicon specific quirks as a errata handling mechanism

as a start UART_ERRATA_FIFO_FULL_ABORT is used to handle the override
for fifo full condition for rx and tx.

Cc: Deepak K <deepa...@ti.com>
Cc: Govindraj R <govindraj.r...@ti.com>
Cc: Kevin Hilman <khil...@deeprootsystems.com>
Cc: Tero Kristo <tero.kri...@nokia.com>
Cc: Tony Lindgren <t...@atomide.com>

Signed-off-by: Nishanth Menon <n...@ti.com>
---
 arch/arm/mach-omap2/serial.c |   15 ++++++++++-----
 1 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 584a2ed..009b63f 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -37,6 +37,8 @@
 #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV    0x52
 #define UART_OMAP_WER          0x17    /* Wake-up enable register */
 
+#define UART_ERRATA_FIFO_FULL_ABORT    (0x1 << 0)
+
 /*
  * NOTE: By default the serial timeout is disabled as it causes lost characters
  * over the serial ports. This means that the UART clocks will stay on until
@@ -64,6 +66,7 @@ struct omap_uart_state {
        struct list_head node;
        struct platform_device pdev;
 
+       u32 errata;
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
        int context_valid;
 
@@ -756,11 +759,13 @@ void __init omap_serial_init_port(int port)
         * omap3xxx: Never read empty UART fifo on UARTs
         * with IP rev >=0x52
         */
-       if (cpu_is_omap44xx()) {
-               uart->p->serial_in = serial_in_override;
-               uart->p->serial_out = serial_out_override;
-       } else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
-                       >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) {
+       if (cpu_is_omap44xx())
+               uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
+       else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
+                       >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
+               uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
+
+       if (uart->errata & UART_ERRATA_FIFO_FULL_ABORT) {
                uart->p->serial_in = serial_in_override;
                uart->p->serial_out = serial_out_override;
        }
-- 
1.6.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to