From: Hema HK <hem...@ti.com>
Changed the musb driver to use omap_build_device api instead of
platform_device_registration.The device specific resources defined in
centralized database will be used. So removed the resource definitions from
the driver file.
Signed-off-by: Hema HK <hem...@ti.com>
Cc: Felipe Balbi <felipe.ba...@nokia.com>,t...@atomide.com
---
Based off pm-wip/hwmods-omap4.
arch/arm/mach-omap2/clock44xx_data.c | 2
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2
arch/arm/mach-omap2/usb-musb.c | 94 ++++++++++++++---------------
3 files changed, 49 insertions(+), 49 deletions(-)
Index: linux-omap-pm/arch/arm/mach-omap2/clock44xx_data.c
===================================================================
--- linux-omap-pm.orig/arch/arm/mach-omap2/clock44xx_data.c
+++ linux-omap-pm/arch/arm/mach-omap2/clock44xx_data.c
@@ -2296,7 +2296,7 @@ static struct clk usb_host_fs_fck = {
};
static struct clk usb_otg_ick = {
- .name = "usb_otg_ick",
+ .name = "usb_otg_hs_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
Index: linux-omap-pm/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
===================================================================
--- linux-omap-pm.orig/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ linux-omap-pm/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -4884,7 +4884,7 @@ static __initdata struct omap_hwmod *oma
/* usb_host_hs class */
/* &omap44xx_usb_host_hs_hwmod, */
/* usb_otg_hs class */
-/* &omap44xx_usb_otg_hs_hwmod, */
+ &omap44xx_usb_otg_hs_hwmod,
/* usb_tll_hs class */
/* &omap44xx_usb_tll_hs_hwmod, */
/* wd_timer class */
Index: linux-omap-pm/arch/arm/mach-omap2/usb-musb.c
===================================================================
--- linux-omap-pm.orig/arch/arm/mach-omap2/usb-musb.c
+++ linux-omap-pm/arch/arm/mach-omap2/usb-musb.c
@@ -30,24 +30,12 @@
#include <mach/irqs.h>
#include <plat/mux.h>
#include <plat/usb.h>
+#include <plat/omap_device.h>
#ifdef CONFIG_USB_MUSB_SOC
-static struct resource musb_resources[] = {
- [0] = { /* start and end set dynamically */
- .flags = IORESOURCE_MEM,
- },
- [1] = { /* general IRQ */
- .start = INT_243X_HS_USB_MC,
- .flags = IORESOURCE_IRQ,
- .name = "mc",
- },
- [2] = { /* DMA IRQ */
- .start = INT_243X_HS_USB_DMA,
- .flags = IORESOURCE_IRQ,
- .name = "dma",
- },
-};
+static const char name[] = "musb_hdrc";
+#define MAX_OMAP_MUSB_HWMOD_NAME_LEN 16
static struct musb_hdrc_config musb_config = {
.multipoint = 1,
@@ -76,43 +64,55 @@ static struct musb_hdrc_platform_data mu
static u64 musb_dmamask = DMA_BIT_MASK(32);
-static struct platform_device musb_device = {
- .name = "musb_hdrc",
- .id = -1,
- .dev = {
- .dma_mask = &musb_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &musb_plat,
+static struct omap_device_pm_latency omap_musb_latency[] = {
+ {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
},
- .num_resources = ARRAY_SIZE(musb_resources),
- .resource = musb_resources,
};
void __init usb_musb_init(struct omap_musb_board_data *board_data)
{
- if (cpu_is_omap243x()) {
- musb_resources[0].start = OMAP243X_HS_BASE;
- } else if (cpu_is_omap34xx()) {
- musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
- } else if (cpu_is_omap44xx()) {
- musb_resources[0].start = OMAP44XX_HSUSB_OTG_BASE;
- musb_resources[1].start = OMAP44XX_IRQ_HS_USB_MC_N;
- musb_resources[2].start = OMAP44XX_IRQ_HS_USB_DMA_N;
- }
- musb_resources[0].end = musb_resources[0].start + SZ_4K - 1;
-
- /*
- * REVISIT: This line can be removed once all the platforms using
- * musb_core.c have been converted to use use clkdev.
- */
- musb_plat.clock = "ick";
- musb_plat.board_data = board_data;
- musb_plat.power = board_data->power >> 1;
- musb_plat.mode = board_data->mode;
- musb_plat.extvbus = board_data->extvbus;
-
- if (platform_device_register(&musb_device) < 0)
- printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
+ char oh_name[MAX_OMAP_MUSB_HWMOD_NAME_LEN];
+ struct omap_hwmod *oh;
+ struct omap_device *od;
+ struct platform_device *pdev;
+ struct device *dev;
+ int l, bus_id = -1;
+ struct musb_hdrc_platform_data *pdata;
+
+ l = snprintf(oh_name, MAX_OMAP_MUSB_HWMOD_NAME_LEN,
+ "usb_otg_hs");
+ WARN(l >= MAX_OMAP_MUSB_HWMOD_NAME_LEN,
+ "String buffer overflow in MUSB device setup\n");
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("Could not look up %s\n", oh_name);
+ } else {
+ musb_plat.clock = "ick";
+ musb_plat.board_data = board_data;
+ musb_plat.power = board_data->power >> 1;
+ musb_plat.mode = board_data->mode;
+ pdata = &musb_plat;
+
+ od = omap_device_build(name, bus_id, oh, pdata,
+ sizeof(struct musb_hdrc_platform_data),
+ omap_musb_latency,
+ ARRAY_SIZE(omap_musb_latency), false);
+ if (IS_ERR(od)) {
+ pr_err("Could not build omap_device for %s %s\n",
+ name, oh_name);
+ } else {
+
+ pdev = &od->pdev;
+ dev = &pdev->dev;
+ get_device(dev);
+ dev->dma_mask = &musb_dmamask;
+ dev->coherent_dma_mask = musb_dmamask;
+ put_device(dev);
+ }
+ }
}
#else
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
