Select SIP package for H4
Signed-off-by: Tony Lindgren <t...@atomide.com>
---
arch/arm/mach-omap2/Kconfig | 1 +
arch/arm/mach-omap2/board-h4.c | 12 ++++++++++++
2 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index d3932d3..b59cdb7 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -50,6 +50,7 @@ config MACH_OMAP2_TUSB6010
config MACH_OMAP_H4
bool "OMAP 2420 H4 board"
depends on ARCH_OMAP2
+ select OMAP_PACKAGE_ZAF
select OMAP_DEBUG_DEVICES
config MACH_OMAP_APOLLON
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 54a231c..8c58f51 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -42,6 +42,8 @@
#include <plat/dma.h>
#include <plat/gpmc.h>
+#include "mux.h"
+
#define H4_FLASH_CS 0
#define H4_SMC91X_CS 1
@@ -338,8 +340,18 @@ static struct i2c_board_info __initdata
h4_i2c_board_info[] = {
},
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap_h4_init(void)
{
+ omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
+
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
