MACH_OMAP_H4_OTG doesn't exist in Kconfig, therefore removing all
references for it from the source code.
Signed-off-by: Christoph Egger <sicce...@cs.fau.de>
---
arch/arm/mach-omap2/board-h4.c | 17 -----------------
1 files changed, 0 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index ce4292b..85d7fb8 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -277,22 +277,6 @@ static struct omap_usb_config h4_usb_config __initdata = {
.pins[1] = 4,
#endif
-#ifdef CONFIG_MACH_OMAP_H4_OTG
- /* S1.10 ON -- USB OTG port
- * usb0 switched to Mini-AB port and isp1301 transceiver;
- * S2.POS3 = OFF, S2.POS4 = ON ... to allow battery charging
- */
- .otg = 1,
- .pins[0] = 4,
-#ifdef CONFIG_USB_GADGET_OMAP
- /* use OTG cable, or standard A-to-MiniB */
- .hmc_mode = 0x14, /* 0:dev/otg 1:host 2:disable */
-#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- /* use OTG cable, or NONSTANDARD (B-to-MiniB) */
- .hmc_mode = 0x11, /* 0:host 1:host 2:disable */
-#endif /* XX */
-
-#else
/* S1.10 OFF -- usb "download port"
* usb0 switched to Mini-B port and isp1105 transceiver;
* S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging
@@ -301,7 +285,6 @@ static struct omap_usb_config h4_usb_config __initdata = {
.pins[0] = 3,
/* .hmc_mode = 0x14,*/ /* 0:dev 1:host 2:disable */
.hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */
-#endif
};
static struct omap_board_config_kernel h4_config[] = {
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
