From: Ohad Ben-Cohen <oh...@ti.com>
Introduce OMAP3 remoteproc module which takes care of
machine-specific code required to start and stop
the DSP remote processor.
Signed-off-by: Ohad Ben-Cohen <oh...@ti.com>
Signed-off-by: Hari Kanigeri <h-kanige...@ti.com>
---
arch/arm/mach-omap2/remoteproc3xxx.c | 226 ++++++++++++++++++++++++++++++++++
1 files changed, 226 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-omap2/remoteproc3xxx.c
diff --git a/arch/arm/mach-omap2/remoteproc3xxx.c
b/arch/arm/mach-omap2/remoteproc3xxx.c
new file mode 100644
index 0000000..f86a333
--- /dev/null
+++ b/arch/arm/mach-omap2/remoteproc3xxx.c
@@ -0,0 +1,226 @@
+/*
+ * Remote Processor machine-specific module for OMAP3
+ *
+ * Copyright (C) 2010 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+/* this is needed for multi-omap support */
+#ifdef CONFIG_ARCH_OMAP3
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <plat/remoteproc.h>
+#include <mach/irqs.h>
+#include <plat/omap_device.h>
+#include <plat/control.h>
+#include <plat/common.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
+#include <asm/uaccess.h>
+
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+
+#define OMAP3_IVA2_BOOTADDR_MASK 0xFFFFFC00
+
+#define PRCM_PM_PWSTCTRL_IVA2_POWER_STATE_MASK (u32)(3)
+#define PRCM_PM_PWSTCTRL_IVA2_POWER_STATE_OFFSET (u32)(0)
+
+#define PRCM_PM_PWSTST_IVA2_InTransition_MASK (u32)(0x100000)
+#define PRCM_PM_PWSTST_IVA2_InTransition_OFFSET (u32)(20)
+
+#define CM_CLKSTCTRL_IVA2_OFFSET (0)
+#define CM_CLKSTCTRL_IVA2_MASK (3)
+
+#define DSP_SYSC_DIRECTBOOT (0)
+#define DSP_SYSC_IDLEBOOT (1)
+#define DSP_SYSC_SELFLOOPBOOT (2)
+#define DSP_SYSC_USRBOOTSTRAP (3)
+#define DSP_SYSC_DEFAULTRESTORE (4)
+
+#ifdef CONFIG_BRIDGE_DEBUG
+static void omap3_rproc_dump_regs(struct device *dev)
+{
+ u32 temp;
+
+ temp = cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_FCLKEN);
+ dev_info(dev, "CM_FCLKEN_IVA2 = 0x%x \n", temp);
+ temp = cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_ICLKEN1);
+ dev_info(dev, "CM_ICLKEN1_IVA2 = 0x%x \n", temp);
+ temp = cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_IDLEST);
+ dev_info(dev, "CM_IDLEST_IVA2 = 0x%x \n", temp);
+ temp = cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSTCTRL);
+ dev_info(dev, "CM_CLKSTCTRL_IVA2 = 0x%x \n", temp);
+ temp = cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST);
+ dev_info(dev, "CM_CLKSTST_IVA2 = 0x%x \n", temp);
+ temp = prm_read_mod_reg(OMAP3430_IVA2_MOD, RM_RSTCTRL);
+ dev_info(dev, "RM_RSTCTRL_IVA2 = 0x%x \n", temp);
+ temp = prm_read_mod_reg(OMAP3430_IVA2_MOD, RM_RSTST);
+ dev_info(dev, "RM_RSTST_IVA2 = 0x%x \n", temp);
+ temp = prm_read_mod_reg(OMAP3430_IVA2_MOD, PM_PWSTCTRL);
+ dev_info(dev, "PM_PWSTCTRL_IVA2 = 0x%x \n", temp);
+ temp = prm_read_mod_reg(OMAP3430_IVA2_MOD, PM_PWSTST);
+ dev_info(dev, "PM_PWSTST_IVA2 = 0x%x \n", temp);
+ temp = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
+ dev_info(dev, "CM_ICLKEN1_CORE = 0x%x \n", temp);
+}
+#else
+static void omap3_rproc_dump_regs(struct device *dev) { }
+#endif
+
+static int omap3_rproc_get_state(struct device *dev)
+{
+ u32 dsp_pwr_state;
+
+ dsp_pwr_state = prm_read_mod_reg(OMAP3430_IVA2_MOD, PM_PWSTST);
+
+ return dsp_pwr_state & OMAP_POWERSTATEST_MASK;
+}
+
+static int omap3_rproc_start(struct device *dev, u32 start_addr)
+{
+ dev_info(dev, "%s: set boot mode, addr: 0x%x\n", __func__, start_addr);
+
+ omap3_rproc_dump_regs(dev);
+
+ if (PWRDM_POWER_ON != omap3_rproc_get_state(dev)) {
+ /* IVA2 is not in ON state */
+ /* Read and set PM_PWSTCTRL_IVA2 to ON */
+ prm_rmw_mod_reg_bits(OMAP_POWERSTATEST_MASK, PWRDM_POWER_ON,
+ OMAP3430_IVA2_MOD, PM_PWSTCTRL);
+
+ /* Set the SW supervised state transition */
+ cm_write_mod_reg(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP,
+ OMAP3430_IVA2_MOD, CM_CLKSTCTRL);
+
+ /* Wait until the state has moved to ON */
+ while (prm_read_mod_reg(OMAP3430_IVA2_MOD, PM_PWSTST)
+ & OMAP_INTRANSITION)
+ ;
+
+ /* Disable Automatic transition */
+ cm_write_mod_reg(OMAP34XX_CLKSTCTRL_DISABLE_AUTO,
+ OMAP3430_IVA2_MOD, CM_CLKSTCTRL);
+ }
+
+ /* Assert RST1 i.e only the RST only for DSP megacell */
+ prm_rmw_mod_reg_bits(OMAP3430_RST1_IVA2, OMAP3430_RST1_IVA2,
+ OMAP3430_IVA2_MOD, RM_RSTCTRL);
+ /* Mask address with 1K for compatibility */
+ omap_ctrl_writel(start_addr & OMAP3_IVA2_BOOTADDR_MASK,
+ OMAP343X_CONTROL_IVA2_BOOTADDR);
+ /* Set bootmode to self loop if dsp_debug flag is true */
+ omap_ctrl_writel(DSP_SYSC_DIRECTBOOT, OMAP343X_CONTROL_IVA2_BOOTMOD);
+
+ /*Set Autoidle Mode for IVA2 PLL */
+ cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
+ OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+
+ /* select GPT5 and GPT6 as IVA2 wake-up modules */
+ prm_rmw_mod_reg_bits(0x3F, 0xC0, OMAP3430_PER_MOD,
+ OMAP3430_PM_IVAGRPSEL);
+
+ /* make sure GPT5 and GPT6 are not selected as MPU wake-up modules */
+ prm_rmw_mod_reg_bits(0xC0, 0, OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
+
+ /* PER domain sleep dependency with IVA2 domain is enabled */
+ cm_rmw_mod_reg_bits(4, 4, OMAP3430_PER_MOD, OMAP3430_CM_SLEEPDEP);
+
+ /* Allow automatic transitions */
+ cm_write_mod_reg(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, OMAP3430_IVA2_MOD,
+ CM_CLKSTCTRL);
+
+ /* Let DSP go */
+ dev_dbg(dev, "%s Unreset DSP\n", __func__);
+
+ /* release the RST1, DSP starts executing now .. */
+ prm_rmw_mod_reg_bits(OMAP3430_RST1_IVA2, 0, OMAP3430_IVA2_MOD,
+ RM_RSTCTRL);
+
+ omap3_rproc_dump_regs(dev);
+
+ return 0;
+}
+
+static int omap3_rproc_stop(struct device *dev)
+{
+ dev_info(dev, "%s\n", __func__);
+
+ omap3_rproc_dump_regs(dev);
+
+ /* Set PM_PWSTCTRL_IVA2 to OFF */
+ prm_rmw_mod_reg_bits(OMAP_POWERSTATEST_MASK,
+ PWRDM_POWER_OFF, OMAP3430_IVA2_MOD, PM_PWSTCTRL);
+
+ /* Set the SW supervised state transition for Sleep */
+ cm_write_mod_reg(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, OMAP3430_IVA2_MOD,
+ CM_CLKSTCTRL);
+
+ /* Reset RST1 + RST3 */
+ prm_rmw_mod_reg_bits(OMAP3430_RST1_IVA2 | OMAP3430_RST3_IVA2,
+ OMAP3430_RST1_IVA2 | OMAP3430_RST3_IVA2,
+ OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+ udelay(10);
+
+ return 0;
+}
+
+static struct omap_rproc_ops omap3_rproc_ops = {
+ .start = omap3_rproc_start,
+ .stop = omap3_rproc_stop,
+ .get_state = omap3_rproc_get_state,
+};
+
+static struct omap_rproc_platform_data omap3_rproc_data[] = {
+ {
+ .name = "dsp",
+ .ops = &omap3_rproc_ops,
+ .oh_name = "iva2_hwmod",
+ },
+};
+
+struct omap_rproc_platform_data *omap3_get_rproc_data(void)
+{
+ return omap3_rproc_data;
+}
+
+int omap3_get_rproc_data_size(void)
+{
+ return ARRAY_SIZE(omap3_rproc_data);
+}
+#else
+struct omap_rproc_platform_data *omap3_get_rproc_data(void)
+{
+ return NULL;
+}
+
+int omap3_get_rproc_data_size(void)
+{
+ return 0;
+}
+#endif
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("OMAP3 Remote Processor module");
+MODULE_AUTHOR("Ohad Ben-Cohen <o...@wizery.com>");
+MODULE_AUTHOR("Hari Kanigeri <h-kanige...@ti.com>");
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
