This patch series adds native support for wl1271 on ZOOM. Changes since v1:
- introduce a fixed regulator device to control the power of wl1271 - allow to propagate private board-specific data to SDIO function drivers - allow SDIO function driver to control the card's power via new API - make it possible to keep the card's power down (without depending on an explicit SDIO function driver power-down request) Thanks to these changes, we no longer need a separate platform device (carrying e.g. the external irq information of the device), and no longer need to emulate virtual card detect events. The two "board muxing" pathces were already taken by Tony, and are resent here just to make it easier for people to use/test these pathces. The changes to the MMC core really needs careful review; there still might be some pitfalls that haven't been covered. E.g., one thing we plan to look at next is their bahvior together with SDIO Suspend/Resume. Special thanks to Roger Quadros and Nicolas Pitre for their extensive review and helpful suggestions. The patches are based on 2.6.35-rc5, and were tested on ZOOM3. Thanks, Ohad Ben-Cohen (20): sdio: add TI + wl1271 ids wireless: wl1271: remove SDIO IDs from driver mmc: support embedded data field in mmc_host omap zoom2: wlan board muxing omap zoom3: wlan board muxing wireless: wl1271: make wl12xx.h common to both spi and sdio wireless: wl1271: support return value for the set power func wireless: wl1271: take irq info from private board data wireless: wl1271: make ref_clock configurable by board omap: zoom: add fixed regulator device for wlan omap: hsmmc: support mmc3 regulator power control omap: hsmmc: allow board-specific settings of private mmc data omap: zoom: add mmc3/wl1271 device support mmc: sdio: fully reconfigure oldcard on resume mmc: sdio: verify existence of resume handler mmc: introduce API to control the card's power mmc: sdio: relocate sdio_set_block_size call mmc: sdio: enable a default power off mode of the card omap: zoom: keep the MMC3 wl1271 device powered off wireless: wl1271: call SDIO claim/release power API arch/arm/mach-omap2/board-zoom-peripherals.c | 54 +++++++++++++++++++ arch/arm/mach-omap2/board-zoom2.c | 13 +++++ arch/arm/mach-omap2/board-zoom3.c | 13 +++++ arch/arm/mach-omap2/hsmmc.c | 15 ++++-- arch/arm/mach-omap2/hsmmc.h | 2 + arch/arm/plat-omap/include/plat/mmc.h | 5 ++ drivers/mmc/core/bus.c | 3 + drivers/mmc/core/core.c | 50 ++++++++++++++++++ drivers/mmc/core/sdio.c | 36 +++++++++++-- drivers/mmc/core/sdio_bus.c | 9 --- drivers/mmc/core/sdio_io.c | 50 ++++++++++++++++++ drivers/mmc/host/omap_hsmmc.c | 72 +++++++++++++++++++++++--- drivers/net/wireless/wl12xx/wl1251_sdio.c | 2 +- drivers/net/wireless/wl12xx/wl1251_spi.c | 2 +- drivers/net/wireless/wl12xx/wl1271.h | 3 +- drivers/net/wireless/wl12xx/wl1271_boot.c | 9 ++-- drivers/net/wireless/wl12xx/wl1271_boot.h | 1 - drivers/net/wireless/wl12xx/wl1271_io.h | 8 ++- drivers/net/wireless/wl12xx/wl1271_main.c | 4 +- drivers/net/wireless/wl12xx/wl1271_sdio.c | 31 +++++------ drivers/net/wireless/wl12xx/wl1271_spi.c | 8 ++- include/linux/mmc/card.h | 2 + include/linux/mmc/host.h | 15 +++++ include/linux/mmc/sdio_func.h | 3 + include/linux/mmc/sdio_ids.h | 3 + include/linux/spi/wl12xx.h | 34 ------------ include/linux/wl12xx.h | 35 ++++++++++++ 27 files changed, 393 insertions(+), 89 deletions(-) delete mode 100644 include/linux/spi/wl12xx.h create mode 100644 include/linux/wl12xx.h -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html