On Thu, 2010-08-12 at 13:51 +0200, ext Tony Lindgren wrote:
> * Ameya Palande <ameya.pala...@nokia.com> [100812 13:28]:
> > Hi Kevin,
> >
> > On Wed, 2010-08-11 at 18:03 +0200, ext Kevin Hilman wrote:
> > > From: Kevin Hilman <khil...@ti.com>
> > >
> > > Commit 5a5f561 (convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes)
> > > mistakenly removed the check for PER when disabling the IO chain.
> > >
> > > During idle, if the PER powerdomain transitions and CORE does not (as
> > > is the case with the lower C-states when using CPUidle) the IO pad
> > > wakeups are not being disabled in the idle path after they are
> > > enabled.
> > >
> > > This patch ensures that the check for disabling IO wakeups also checks
> > > for PER transitions, matching the check done to enable IO wakeups.
> > >
> > > Found when debugging PM/CPUidle related problems reported by Ameya
> > > Palande <ameya.pala...@nokia.com>. Problems were triggered
> > > particularily on boards with UART2 consoles (n900, Overo) since UART2
> > > is in the PER powerdomain.
> > >
> > > Tested on l-o master (omap3_defonfig + CONFIG_CPU_IDLE=y) as well
> > > as with current PM branch. Boards tested: n900, Overo, omap3evm.
> > >
> > > Cc: Paul Walmsley <p...@pwsan.com>
> > > Cc: Ameya Palande <ameya.pala...@nokia.com>
> > > Tested-by: Jarkko Nikula <jhnik...@gmail.com>
> > > Signed-off-by: Kevin Hilman <khil...@deeprootsystems.com>
> > > ---
> > > Tony, this should go in with fixes for -rc2
> > >
> > > Changes since v1
> > > - added a bit of history about where the problem was created
> > > - added 'Tested-by' for Jarkko
> > >
> > > arch/arm/mach-omap2/pm34xx.c | 4 +++-
> > > 1 files changed, 3 insertions(+), 1 deletions(-)
> > >
> > > diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> > > index fb4994a..7b03426 100644
> > > --- a/arch/arm/mach-omap2/pm34xx.c
> > > +++ b/arch/arm/mach-omap2/pm34xx.c
> > > @@ -480,7 +480,9 @@ void omap_sram_idle(void)
> > > }
> > >
> > > /* Disable IO-PAD and IO-CHAIN wakeup */
> > > - if (omap3_has_io_wakeup() && core_next_state < PWRDM_POWER_ON) {
> > > + if (omap3_has_io_wakeup() &&
> > > + (per_next_state < PWRDM_POWER_ON ||
> > > + core_next_state < PWRDM_POWER_ON)) {
> > > prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
> > > omap3_disable_io_chain();
> > > }
> >
> > Thanks for your fix!
> > I tried out following patch on n900 kernel (based on 2.6.35 mainline)
> > hosted at: http://gitorious.org/nokia-n900-kernel
> >
> > Patch:
> >
> > diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> > index b88737f..887242d 100644
> > --- a/arch/arm/mach-omap2/pm34xx.c
> > +++ b/arch/arm/mach-omap2/pm34xx.c
> > @@ -479,7 +479,8 @@ void omap_sram_idle(void)
> > }
> >
> > /* Disable IO-PAD and IO-CHAIN wakeup */
> > - if (core_next_state < PWRDM_POWER_ON) {
> > + if (per_next_state < PWRDM_POWER_ON ||
> > + core_next_state < PWRDM_POWER_ON) {
> > prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
> > PM_WKEN);
> > omap3_disable_io_chain();
> > }
> >
> > And got following WARNING after sometime:
>
> So what's the deal, is this ack or nak for Kevin's patch then?
Kevin's patch seems to fix the serial port issue for sure, so we
definitely need it. I just wanted to point out that there are more issue
in CPUIDLE :)
Cheers,
Ameya.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
