Thara Gopinath <th...@ti.com> writes:
> This patch also introduces omap3_mpu_set_rate, omap3_iva_set_rate,
> omap3_l3_set_rate, omap3_mpu_get_rate, omap3_iva_get_rate,
> omap3_l3_get_rate as device specific set rate and get rate
> APIs for OMAP3 mpu, iva and l3_main devices. This patch also
> calls into opp_populate_rate_fns during system init to register
> various set_rate and get_rate APIs with the generic opp
> framework.
>
> Signed-off-by: Thara Gopinath <th...@ti.com>
> ---
> arch/arm/mach-omap2/cpufreq34xx.c | 104
> +++++++++++++++++++++++++++++++++++++
> 1 files changed, 104 insertions(+), 0 deletions(-)
These don't belong in cpufreq34xx.c (now known as opp3xxx_data.c) This
file is only for the OPP data itself. Any SoC specific code should go
into pm34xx.c.
Kevin
> diff --git a/arch/arm/mach-omap2/cpufreq34xx.c
> b/arch/arm/mach-omap2/cpufreq34xx.c
> index 195b5bc..8b9ef72 100644
> --- a/arch/arm/mach-omap2/cpufreq34xx.c
> +++ b/arch/arm/mach-omap2/cpufreq34xx.c
> @@ -24,8 +24,22 @@
>
> #include <plat/opp.h>
> #include <plat/cpu.h>
> +#include <plat/clock.h>
> +
> +#include "cm-regbits-34xx.h"
> +#include "prm.h"
> #include "omap3-opp.h"
>
> +static int omap3_mpu_set_rate(struct device *dev, unsigned long rate);
> +static int omap3_iva_set_rate(struct device *dev, unsigned long rate);
> +static int omap3_l3_set_rate(struct device *dev, unsigned long rate);
> +
> +static unsigned long omap3_mpu_get_rate(struct device *dev);
> +static unsigned long omap3_iva_get_rate(struct device *dev);
> +static unsigned long omap3_l3_get_rate(struct device *dev);
> +
> +struct clk *dpll1_clk, *dpll2_clk, *dpll3_clk;
> +
> static struct omap_opp_def __initdata omap34xx_opp_def_list[] = {
> /* MPU OPP1 */
> OMAP_OPP_DEF("mpu", true, 125000000, 975000),
> @@ -92,12 +106,82 @@ static struct omap_opp_def __initdata
> omap36xx_opp_def_list[] = {
> };
> static u32 omap36xx_opp_def_size = ARRAY_SIZE(omap36xx_opp_def_list);
>
> +
> +static int omap3_mpu_set_rate(struct device *dev, unsigned long rate)
> +{
> + unsigned long cur_rate = omap3_mpu_get_rate(dev);
> + int ret;
> +
> +#ifdef CONFIG_CPU_FREQ
> + struct cpufreq_freqs freqs_notify;
> +
> + freqs_notify.old = cur_rate / 1000;
> + freqs_notify.new = rate / 1000;
> + freqs_notify.cpu = 0;
> + /* Send pre notification to CPUFreq */
> + cpufreq_notify_transition(&freqs_notify, CPUFREQ_PRECHANGE);
> +#endif
> + ret = clk_set_rate(dpll1_clk, rate);
> + if (ret) {
> + dev_warn(dev, "%s: Unable to set rate to %ld\n",
> + __func__, rate);
> + return ret;
> + }
> +
> +#ifdef CONFIG_CPU_FREQ
> + /* Send a post notification to CPUFreq */
> + cpufreq_notify_transition(&freqs_notify, CPUFREQ_POSTCHANGE);
> +#endif
> +
> +#ifndef CONFIG_CPU_FREQ
> + /*Update loops_per_jiffy if processor speed is being changed*/
> + loops_per_jiffy = compute_lpj(loops_per_jiffy,
> + cur_rate / 1000, rate / 1000);
> +#endif
> + return 0;
> +}
> +
> +static unsigned long omap3_mpu_get_rate(struct device *dev)
> +{
> + return dpll1_clk->rate;
> +}
> +
> +static int omap3_iva_set_rate(struct device *dev, unsigned long rate)
> +{
> + return clk_set_rate(dpll2_clk, rate);
> +}
> +
> +static unsigned long omap3_iva_get_rate(struct device *dev)
> +{
> + return dpll2_clk->rate;
> +}
> +
> +static int omap3_l3_set_rate(struct device *dev, unsigned long rate)
> +{
> + int l3_div;
> +
> + l3_div = cm_read_mod_reg(CORE_MOD, CM_CLKSEL) &
> + OMAP3430_CLKSEL_L3_MASK;
> +
> + return clk_set_rate(dpll3_clk, rate * l3_div);
> +}
> +
> +static unsigned long omap3_l3_get_rate(struct device *dev)
> +{
> + int l3_div;
> +
> + l3_div = cm_read_mod_reg(CORE_MOD, CM_CLKSEL) &
> + OMAP3430_CLKSEL_L3_MASK;
> + return dpll3_clk->rate / l3_div;
> +}
> +
> /* Temp variable to allow multiple calls */
> static u8 __initdata omap3_table_init;
>
> int __init omap3_pm_init_opp_table(void)
> {
> struct omap_opp_def *opp_def, *omap3_opp_def_list;
> + struct device *dev;
> u32 omap3_opp_def_size;
> int i, r;
>
> @@ -122,6 +206,26 @@ int __init omap3_pm_init_opp_table(void)
> opp_def->freq, opp_def->hwmod_name);
> }
>
> + dpll1_clk = clk_get(NULL, "dpll1_ck");
> + dpll2_clk = clk_get(NULL, "dpll2_ck");
> + dpll3_clk = clk_get(NULL, "dpll3_m2_ck");
> +
> + /* Populate the set rate and get rate for mpu, iva and l3 device */
> + dev = omap2_get_mpuss_device();
> + if (dev)
> + opp_populate_rate_fns(dev, omap3_mpu_set_rate,
> + omap3_mpu_get_rate);
> +
> + dev = omap2_get_iva_device();
> + if (dev)
> + opp_populate_rate_fns(dev, omap3_iva_set_rate,
> + omap3_iva_get_rate);
> +
> + dev = omap2_get_l3_device();
> + if (dev)
> + opp_populate_rate_fns(dev, omap3_l3_set_rate,
> + omap3_l3_get_rate);
> +
> return 0;
> }
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
