From: Ming Lei <tom.leim...@gmail.com>
This patch fixes one bugs of OUT transfer in double buffer case:
-the current code only enable autoclear for dma mode 1, and not
for dma mode 0
Without this patch, test #5 of usbtest can't be passed if we
configure musb as g_zero and use fifo mode 3 to enable double
buffer mode.
With this patch and the following patch(fix dma length),
on my beagle B5, test#5(queued bulk out) may go beyond
18Mbyte/s(seems dma mode 0 is quicker in double buffer case)
if musb is configured as g_zero and fifo mode 3 is taken, follows
the test command:
#./testusb -D DEV_NAME -c 1024 -t 5 -s 32768 -g 8 [1]
Also I have tested this patch can't make g_ether broken.
[1],source of testusb : tools/usb/testusb.c under linux kernel;
Signed-off-by: Ming Lei <tom.leim...@gmail.com>
Cc: David Brownell <dbrown...@users.sourceforge.net>
Cc: Felipe Balbi <m...@felipebalbi.com>
Cc: Anand Gadiyar <gadi...@ti.com>
Cc: Mike Frysinger <vap...@gentoo.org>
Cc: Sergei Shtylyov <sshtyl...@ru.mvista.com>
---
drivers/usb/musb/musb_gadget.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index f206c94..176e127 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -643,8 +643,8 @@ static void rxstate(struct musb *musb, struct musb_request
*req)
*/
csr |= MUSB_RXCSR_DMAENAB;
-#ifdef USE_MODE1
csr |= MUSB_RXCSR_AUTOCLEAR;
+#ifdef USE_MODE1
/* csr |= MUSB_RXCSR_DMAMODE; */
/* this special sequence (enabling and then
--
1.6.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
