Re: [PATCH v2 1/4] omap4 hsmmc: Adding card detect support for MMC1

[Felipe Balbi]

Hi,

On Sat, Sep 18, 2010 at 11:33:56AM -0500, kishore kadiyala wrote:

@@ -223,6 +224,81 @@ int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
}
EXPORT_SYMBOL(twl6030_interrupt_mask);

+int twl6030_mmc_card_detect_config(void)
+{
+       int ret;
+       u8 reg_val = 0;
+
+       /* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
+       if (twl_class_is_6030()) {

which other class can this be ?

+       /*
+        * Intially Configuring MMC_CTRL for receving interrupts &
+        * Card status on TWL6030 for MMC1
+        */
+       ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val, TWL6030_MMCCTRL);
+       if (ret < 0) {
+               pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
+               return ret;
+       }
+       reg_val &= ~VMMC_AUTO_OFF;
+       reg_val |= SW_FC;
+       ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
+       if (ret < 0) {
+               pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
+               return ret;
+       }
+
+       /* Configuring PullUp-PullDown register */
+       ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val,
+                                               TWL6030_CFG_INPUT_PUPD3);

is this a gpio ? Could gpiolib take care of this ?

+       if (ret < 0) {
+               pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
+                                                                       ret);
+               return ret;
+       }
+       reg_val &= ~(MMC_PU | MMC_PD);
+       ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
+                                               TWL6030_CFG_INPUT_PUPD3);

ditto.

+int twl6030_mmc_card_detect(struct device *dev, int slot)
+{
+       int ret = -EIO;
+       u8 read_reg = 0;
+       struct platform_device *pdev = container_of(dev,
+                                       struct platform_device, dev);

how about:

        struct platform_device *pdev = to_platform_device(dev);

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 562dbbb..a51894d 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -466,8 +466,6 @@ static int omap_hsmmc_gpio_init(struct 
omap_mmc_platform_data *pdata)
        int ret;

        if (gpio_is_valid(pdata->slots[0].switch_pin)) {
-               pdata->suspend = omap_hsmmc_suspend_cdirq;
-               pdata->resume = omap_hsmmc_resume_cdirq;
                if (pdata->slots[0].cover)
                        pdata->slots[0].get_cover_state =
                                        omap_hsmmc_get_cover_state;
@@ -2211,6 +2209,8 @@ static int __init omap_hsmmc_probe(struct platform_device 
*pdev)
                                "Unable to grab MMC CD IRQ\n");
                        goto err_irq_cd;
                }
+               pdata->suspend = omap_hsmmc_suspend_cdirq;
+               pdata->resume = omap_hsmmc_resume_cdirq;

this doesn't look to be part of $SUBJECT, care to explain ?

@@ -173,6 +183,27 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned 
num_bytes);
int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
int twl6030_interrupt_mask(u8 bit_mask, u8 offset);

+/* Card detect Configuration for MMC1 Controller on OMAP4 */
+#ifdef CONFIG_TWL4030_CORE
+int twl6030_mmc_card_detect_config(void);
+#else
+static inline int twl6030_mmc_card_detect_config(void)
+{
+       pr_err("twl6030_mmc_card_detect_config not supported\n");

pr_debug() would be better ??

+/* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */
+#ifdef CONFIG_TWL4030_CORE
+int twl6030_mmc_card_detect(struct device *dev, int slot);
+#else
+static inline int twl6030_mmc_card_detect(struct device *dev, int slot)
+{
+       pr_err("Call back twl6030_mmc_card_detect not supported\n");

ditto.

--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html