The defconfig options for display are taken in the respective Kconfig to enable display by default on OMAP3 platforms
Signed-off-by: Samreen <samr...@ti.com> --- Version3: Eliminate the separate default number of FBs for different architecture. Keeping default FBs as 3 as before. Version2: Enables by default NEC panel used in zoom2/3/3630sdp, instead of Sharp LQ043T1DG01 panel enabled in previous version of this patch drivers/video/omap2/displays/Kconfig | 3 +++ drivers/video/omap2/dss/Kconfig | 6 ++++-- drivers/video/omap2/omapfb/Kconfig | 1 + 3 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig index f8152cf..d818e44 100644 --- a/drivers/video/omap2/displays/Kconfig +++ b/drivers/video/omap2/displays/Kconfig @@ -3,6 +3,7 @@ menu "OMAP2/3 Display Device Drivers" config PANEL_GENERIC tristate "Generic Panel" + default y help Generic panel driver. Used for DVI output for Beagle and OMAP3 SDP. @@ -10,6 +11,7 @@ config PANEL_GENERIC config PANEL_SHARP_LS037V7DW01 tristate "Sharp LS037V7DW01 LCD Panel" depends on OMAP2_DSS + default y select BACKLIGHT_CLASS_DEVICE help LCD Panel used in TI's SDP3430 and EVM boards @@ -23,6 +25,7 @@ config PANEL_SHARP_LQ043T1DG01 config PANEL_NEC_NL8048HL11_01B tristate "NEC NL8048HL11-01B Panel" depends on OMAP2_DSS + default y help This NEC NL8048HL11-01B panel is TFT LCD used in the Zoom2/3/3630 sdp boards. diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig index 43b6440..f3244a2 100644 --- a/drivers/video/omap2/dss/Kconfig +++ b/drivers/video/omap2/dss/Kconfig @@ -1,6 +1,7 @@ menuconfig OMAP2_DSS tristate "OMAP2/3 Display Subsystem support (EXPERIMENTAL)" depends on ARCH_OMAP2 || ARCH_OMAP3 + default y help OMAP2/3 Display Subsystem support. @@ -9,7 +10,7 @@ if OMAP2_DSS config OMAP2_VRAM_SIZE int "VRAM size (MB)" range 0 32 - default 0 + default 4 help The amount of SDRAM to reserve at boot time for video RAM use. This VRAM will be used by omapfb and other drivers that need @@ -102,7 +103,8 @@ config OMAP2_DSS_FAKE_VSYNC config OMAP2_DSS_MIN_FCK_PER_PCK int "Minimum FCK/PCK ratio (for scaling)" range 0 32 - default 0 + default 4 if ARCH_OMAP2 || ARCH_OMAP3 + default 0 if ARCH_OMAP4 help This can be used to adjust the minimum FCK/PCK ratio. diff --git a/drivers/video/omap2/omapfb/Kconfig b/drivers/video/omap2/omapfb/Kconfig index 65149b2..923bf48 100644 --- a/drivers/video/omap2/omapfb/Kconfig +++ b/drivers/video/omap2/omapfb/Kconfig @@ -1,6 +1,7 @@ menuconfig FB_OMAP2 tristate "OMAP2/3 frame buffer support (EXPERIMENTAL)" depends on FB && OMAP2_DSS + default y select OMAP2_VRAM select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3 -- 1.5.6.3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html