srin...@mistralsolutions.com writes:
> From: Srinath <srin...@mistralsolutions.com>
>
> AM3517/05 Craneboard has one EHCI interface on board using port1.
>
> GPIO35 is used as power enable.
> GPIO38 is used as port1 PHY reset.
>
> Signed-off-by: Srinath <srin...@mistralsolutions.com>
> ---
> arch/arm/mach-omap2/board-am3517crane.c | 20 ++++++++++++++++++++
> 1 files changed, 20 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-am3517crane.c
> b/arch/arm/mach-omap2/board-am3517crane.c
> index 13ead33..91791bc 100644
> --- a/arch/arm/mach-omap2/board-am3517crane.c
> +++ b/arch/arm/mach-omap2/board-am3517crane.c
> @@ -28,8 +28,10 @@
>
> #include <plat/board.h>
> #include <plat/common.h>
> +#include <plat/usb.h>
>
> #include "mux.h"
> +#include "control.h"
>
> /* Board initialization */
> static struct omap_board_config_kernel am3517_crane_config[] __initdata = {
> @@ -53,10 +55,28 @@ static void __init am3517_crane_init_irq(void)
> omap_gpio_init();
> }
>>
> +static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
> + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
> + .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
> + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
> +
> + .phy_reset = true,
> + .reset_gpio_port[0] = 38,
> + .reset_gpio_port[1] = -EINVAL,
> + .reset_gpio_port[2] = -EINVAL
> +};
> +
> static void __init am3517_crane_init(void)
> {
> omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
> omap_serial_init();
> +
> + /* Configure GPIO for EHCI port */
> + omap_mux_init_gpio(35, OMAP_PIN_OUTPUT);
Please define a symbolic constant for these GPIO numbers instead of using
hard-coded constants.
> + gpio_request(35, "usb_ehci_enable");
GPIO APIs can fail. Please check return value and act accordingly.
> + gpio_direction_output(35, 1);
> + omap_mux_init_gpio(38, OMAP_PIN_OUTPUT);
> + usb_ehci_init(&ehci_pdata);
> }
>
> MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
