On Sat, Dec 18, 2010 at 02:03:27AM -0700, Paul Walmsley wrote:
> On Fri, 17 Dec 2010, G, Manjunath Kondaiah wrote:
>
> > Add OMAP2420 DMA hwmod data and also add required
> > DMA device attributes.
> >
> > Signed-off-by: G, Manjunath Kondaiah <manj...@ti.com>
> > ---
> > arch/arm/mach-omap2/omap_hwmod_2420_data.c | 87
> > ++++++++++++++++++++++++++++
> > arch/arm/plat-omap/include/plat/dma.h | 11 ++++
> > 2 files changed, 98 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> > b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> > index d953425..eb02fec 100644
> > --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> > +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> > @@ -42,6 +42,7 @@ static struct omap_hwmod omap2420_gpio1_hwmod;
> > static struct omap_hwmod omap2420_gpio2_hwmod;
> > static struct omap_hwmod omap2420_gpio3_hwmod;
> > static struct omap_hwmod omap2420_gpio4_hwmod;
> > +static struct omap_hwmod omap2420_dma_system_hwmod;
> >
> > /* L3 -> L4_CORE interface */
> > static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = {
> > @@ -779,6 +780,89 @@ static struct omap_hwmod omap2420_gpio4_hwmod = {
> > .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
> > };
> >
> > +/* system dma */
> > +static struct omap_hwmod_class_sysconfig omap2420_dma_sysc = {
> > + .rev_offs = 0x0000,
> > + .sysc_offs = 0x002c,
> > + .syss_offs = 0x0028,
> > + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
>
> According to the OMAP242x TRM 2.3 Rev. X [SWPU064X] Table 10-34, the SDMA
> has no SIDLEMODE register bitfield. So this SYSC_HAS_SIDLEMODE appears to
> be incorrect. Manju, please confirm.
I verified again in 2420 TRM, this entry should not there.
>
> > + SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
> > + SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE),
> > + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
>
> And if there is no SIDLEMODE register bitfield, then none of these SIDLE_*
> modes should apply, so they should all be removed also.
correct.
>
> > + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
> > + .sysc_fields = &omap_hwmod_sysc_type1,
> > +};
> > +
> > +static struct omap_hwmod_class omap2420_dma_hwmod_class = {
> > + .name = "dma",
> > + .sysc = &omap2420_dma_sysc,
> > +};
> > +
> > +/* dma attributes */
> > +static struct omap_dma_dev_attr dma_dev_attr = {
> > + .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
> > + IS_CSSA_32 | IS_CDSA_32,
> > + .lch_count = 32,
> > +};
> > +
> > +static struct omap_hwmod_irq_info omap2420_dma_system_irqs[] = {
> > + { .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */
> > + { .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */
> > + { .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */
> > + { .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */
> > +};
> > +
> > +static struct omap_hwmod_addr_space omap2420_dma_system_addrs[] = {
> > + {
> > + .pa_start = 0x48056000,
> > + .pa_end = 0x4a0560ff,
> > + .flags = ADDR_TYPE_RT
> > + },
> > +};
> > +
> > +/* dma_system -> L3 */
> > +static struct omap_hwmod_ocp_if omap2420_dma_system__l3 = {
> > + .master = &omap2420_dma_system_hwmod,
> > + .slave = &omap2420_l3_main_hwmod,
> > + .clk = "core_l3_ck",
> > + .user = OCP_USER_MPU | OCP_USER_SDMA,
> > +};
> > +
> > +/* dma_system master ports */
> > +static struct omap_hwmod_ocp_if *omap2420_dma_system_masters[] = {
> > + &omap2420_dma_system__l3,
> > +};
> > +
> > +/* l4_cfg -> dma_system */
>
> l4_cfg should be l4_core.
ok.
>
> > +static struct omap_hwmod_ocp_if omap2420_l4_core__dma_system = {
> > + .master = &omap2420_l4_core_hwmod,
> > + .slave = &omap2420_dma_system_hwmod,
> > + .clk = "sdma_ick",
> > + .addr = omap2420_dma_system_addrs,
> > + .addr_cnt = ARRAY_SIZE(omap2420_dma_system_addrs),
> > + .user = OCP_USER_MPU | OCP_USER_SDMA,
> > +};
> > +
> > +/* dma_system slave ports */
> > +static struct omap_hwmod_ocp_if *omap2420_dma_system_slaves[] = {
> > + &omap2420_l4_core__dma_system,
> > +};
> > +
> > +static struct omap_hwmod omap2420_dma_system_hwmod = {
> > + .name = "dma",
> > + .class = &omap2420_dma_hwmod_class,
> > + .mpu_irqs = omap2420_dma_system_irqs,
> > + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_dma_system_irqs),
> > + .main_clk = "core_l3_ck",
> > + .slaves = omap2420_dma_system_slaves,
> > + .slaves_cnt = ARRAY_SIZE(omap2420_dma_system_slaves),
> > + .masters = omap2420_dma_system_masters,
> > + .masters_cnt = ARRAY_SIZE(omap2420_dma_system_masters),
> > + .dev_attr = &dma_dev_attr,
> > + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
> > + .flags = HWMOD_NO_IDLEST,
> > +};
> > +
> > static __initdata struct omap_hwmod *omap2420_hwmods[] = {
> > &omap2420_l3_main_hwmod,
> > &omap2420_l4_core_hwmod,
> > @@ -797,6 +881,9 @@ static __initdata struct omap_hwmod *omap2420_hwmods[]
> > = {
> > &omap2420_gpio2_hwmod,
> > &omap2420_gpio3_hwmod,
> > &omap2420_gpio4_hwmod,
> > +
> > + /* dma_system class*/
> > + &omap2420_dma_system_hwmod,
> > NULL,
> > };
> >
> > diff --git a/arch/arm/plat-omap/include/plat/dma.h
> > b/arch/arm/plat-omap/include/plat/dma.h
> > index 2378399..c466566 100644
> > --- a/arch/arm/plat-omap/include/plat/dma.h
> > +++ b/arch/arm/plat-omap/include/plat/dma.h
> > @@ -295,6 +295,13 @@
> > #define DMA_ERRATA_3_3 BIT(0x5)
> > #define DMA_ROMCODE_BUG BIT(0x6)
> >
> > +/* Attributes for OMAP DMA Contrller */
> > +#define DMA_LINKED_LCH BIT(0x0)
> > +#define GLOBAL_PRIORITY BIT(0x1)
> > +#define RESERVE_CHANNEL BIT(0x2)
> > +#define IS_CSSA_32 BIT(0x3)
> > +#define IS_CDSA_32 BIT(0x4)
> > +
> > enum omap_reg_offsets {
> >
> > GCR, GSCR, GRST1, HW_ID,
> > @@ -389,6 +396,10 @@ struct omap_dma_channel_params {
> > #endif
> > };
> >
> > +struct omap_dma_dev_attr {
> > + u32 dev_caps;
> > + u16 lch_count;
> > +};
> >
> > extern void omap_set_dma_priority(int lch, int dst_port, int priority);
> > extern int omap_request_dma(int dev_id, const char *dev_name,
> > --
> > 1.7.1
> >
>
> I've verified the clocks, the register addresses, and the IRQ numbers
> against the TRM. After the SIDLE* stuff is fixed, you can add my ack.
Thanks. I will send pull request to tony.
-Manjunath
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
