OMAP4 introduces dedicated internal DMA which is ADMA for its MMC
controllers HSMMC1 & HSMMC2.
Renaming "use_dma" member of the struct omap_hsmmc_host to "xfer_type"
and defining the transfer modes PIO/SDMA/ADMA that can be used by the
MMC controller.
Signed-off-by: Kishore Kadiyala <kishore.kadiy...@ti.com>
Reviewed-by: Sukumar Ghorai <s-gho...@ti.com>
---
drivers/mmc/host/omap_hsmmc.c | 20 +++++++++++++-------
1 files changed, 13 insertions(+), 7 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 5d46021..8fb8586 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -125,6 +125,11 @@
#define OMAP_MMC_SLEEP_TIMEOUT 1000
#define OMAP_MMC_OFF_TIMEOUT 8000
+/* Transfer Modes used by MMC controller */
+#define OMAP_HSMMC_USE_PIO_XFER 0
+#define OMAP_HSMMC_USE_SDMA_XFER 1
+#define OMAP_HSMMC_USE_ADMA_XFER 2
+
/*
* One controller can have multiple slots, like on some omap boards using
* omap.c controller driver. Luckily this is not currently done on any known
@@ -172,7 +177,8 @@ struct omap_hsmmc_host {
u32 bytesleft;
int suspended;
int irq;
- int use_dma, dma_ch;
+ int dma_ch;
+ int xfer_type; /* Transfer can be PIO/SDMA/ADMA */
int dma_line_tx, dma_line_rx;
int slot_id;
int got_dbclk;
@@ -545,7 +551,7 @@ static void omap_hsmmc_enable_irq(struct omap_hsmmc_host
*host,
{
unsigned int irq_mask;
- if (host->use_dma)
+ if (host->xfer_type != OMAP_HSMMC_USE_PIO_XFER)
irq_mask = INT_EN_MASK & ~(BRR_ENABLE | BWR_ENABLE);
else
irq_mask = INT_EN_MASK;
@@ -835,7 +841,7 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host,
struct mmc_command *cmd,
cmdreg &= ~(DDIR);
}
- if (host->use_dma)
+ if (host->xfer_type != OMAP_HSMMC_USE_PIO_XFER)
cmdreg |= DMA_EN;
host->req_in_progress = 1;
@@ -864,7 +870,7 @@ static void omap_hsmmc_request_done(struct omap_hsmmc_host
*host, struct mmc_req
omap_hsmmc_disable_irq(host);
/* Do not complete the request if DMA is still in progress */
- if (mrq->data && host->use_dma && dma_ch != -1)
+ if (mrq->data && host->xfer_type && dma_ch != -1)
return;
host->mrq = NULL;
mmc_request_done(host->mmc, mrq);
@@ -942,7 +948,7 @@ static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host
*host, int errno)
host->dma_ch = -1;
spin_unlock(&host->irq_lock);
- if (host->use_dma && dma_ch != -1) {
+ if (host->xfer_type && dma_ch != -1) {
dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len,
omap_hsmmc_get_dma_dir(host, host->data));
omap_free_dma(dma_ch);
@@ -1451,7 +1457,7 @@ omap_hsmmc_prepare_data(struct omap_hsmmc_host *host,
struct mmc_request *req)
| (req->data->blocks << 16));
set_data_timeout(host, req->data->timeout_ns, req->data->timeout_clks);
- if (host->use_dma) {
+ if (host->xfer_type) {
ret = omap_hsmmc_start_dma_transfer(host, req);
if (ret != 0) {
dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n");
@@ -2050,7 +2056,7 @@ static int __init omap_hsmmc_probe(struct platform_device
*pdev)
host->mmc = mmc;
host->pdata = pdata;
host->dev = &pdev->dev;
- host->use_dma = 1;
+ host->xfer_type = OMAP_HSMMC_USE_SDMA_XFER;
host->dev->dma_mask = &pdata->dma_mask;
host->dma_ch = -1;
host->irq = irq;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
