* Nicolas Pitre <n...@fluxnic.net> [110203 19:32]:
> On Thu, 3 Feb 2011, Tony Lindgren wrote:
>
> > This way we can have the debug-macro.S be common for omap1 and omap2+
> > and get sensible error messages booting the wrong zImage with
> > CONFIG_AUTO_ZRELADDR selected. Note that this does not seem to work
> > with u-boot and uImage.
...
> Gaaaaah! This is horrible.
-ENOREGISTERS :)
> OK, you do want to store data in memory, right? So the best way to
> always be position independent, even cross section, is to do the
> following (inspired by RMK's trick in the p2v series):
>
> .data
>
> foo: .word 0 @ value for sput
> .word 0 @ value for nik
>
> .text
>
> bar: .word .
> .word foo
>
> sputnik:
>
> adr r0, bar @ get relative address of bar
> ldr r1, [r0] @ get absolute address of bar
> sub r1, r1, r0 @ difference between abs and rel address
> ldr r0, [r0, #4] @ get absolute address of foo
> sub r0, r0, r1 @ turn that into a relative address
>
> ldmia r0, {r1, r2} @ retrieve sput and nik
> add r0, r1, r2
> mov pc, lr
>
> This code is totally position independent, so it works whether or not
> the MMU is active. Therefore a similar technique in your macro (you
> could even put it into a macro for it) would allow you to get rid of the
> mrc and test for MMU active, get rid of the #ifdef, and not be limited
> to a 128 MB mask, etc. And it is just one word longer than your
> shortest version i.e. 2 constants + 5 instructions vs 4 instructions + 2
> literal pool entries.
I think if we keep the address of the memory location in rx instead of
the port address value, then this could be done.
That would limit all the trickery to inituart only. Then addruart and
busyuart could just do ldr from the memory location to get the port
data without any trickery.
In that case the mapping of IO space for the serial port in head.S
would have to be changed as that relies on rx containing the port
IO address..
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
