On Wed, 2 Feb 2011, Kishore Kadiyala wrote:
> Update the omap2420 hwmod data with the HSMMC info.
Umm, this doesn't look right. OMAP2420 doesn't have an HSMMC block as far
as I know. It also uses a different driver than later OMAPs.
More comments below.
> Add a device attribute structure which will be used
> by the host driver to find whether the HSMMC controller
> supports DUAL VOLT cards.
>
> Signed-off-by: Kishore Kadiyala <kishore.kadiy...@ti.com>
> ---
> arch/arm/mach-omap2/omap_hwmod_2420_data.c | 88
> ++++++++++++++++++++++++++++
> arch/arm/plat-omap/include/plat/mmc.h | 7 ++
> 2 files changed, 95 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> index b85c630..1fbb618 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> @@ -18,6 +18,7 @@
> #include <plat/serial.h>
> #include <plat/i2c.h>
> #include <plat/gpio.h>
> +#include <plat/mmc.h>
>
> #include "omap_hwmod_common_data.h"
>
> @@ -44,6 +45,7 @@ static struct omap_hwmod omap2420_gpio2_hwmod;
> static struct omap_hwmod omap2420_gpio3_hwmod;
> static struct omap_hwmod omap2420_gpio4_hwmod;
> static struct omap_hwmod omap2420_dma_system_hwmod;
> +static struct omap_hwmod omap2420_mmc1_hwmod;
>
> /* L3 -> L4_CORE interface */
> static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = {
> @@ -95,6 +97,24 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup
> = {
> .user = OCP_USER_MPU | OCP_USER_SDMA,
> };
>
> +/* L4 CORE -> MMC1 interface */
> +static struct omap_hwmod_addr_space omap2420_mmc1_addr_space[] = {
> + {
> + .pa_start = 0x4809c000,
> + .pa_end = 0x4809c07f,
> + .flags = ADDR_TYPE_RT,
> + },
> +};
> +
> +static struct omap_hwmod_ocp_if omap2420_l4_core__mmc1 = {
> + .master = &omap2420_l4_core_hwmod,
> + .slave = &omap2420_mmc1_hwmod,
> + .clk = "mmchs1_ick",
This clock doesn't exist in the OMAP2420 clock tree.
> + .addr = omap2420_mmc1_addr_space,
> + .addr_cnt = ARRAY_SIZE(omap2420_mmc1_addr_space),
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> /* L4 CORE -> UART1 interface */
> static struct omap_hwmod_addr_space omap2420_uart1_addr_space[] = {
> {
> @@ -196,6 +216,7 @@ static struct omap_hwmod_ocp_if
> *omap2420_l4_core_slaves[] = {
> /* Master interfaces on the L4_CORE interconnect */
> static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
> &omap2420_l4_core__l4_wkup,
> + &omap2420_l4_core__mmc1,
> &omap2_l4_core__uart1,
> &omap2_l4_core__uart2,
> &omap2_l4_core__uart3,
> @@ -864,6 +885,72 @@ static struct omap_hwmod omap2420_dma_system_hwmod = {
> .flags = HWMOD_NO_IDLEST,
> };
>
> +/* MMC/SD/SDIO common */
> +
> +static struct omap_hwmod_class_sysconfig mmc_sysc = {
> + .rev_offs = 0x3c,
> + .sysc_offs = 0x64,
> + .syss_offs = 0x68,
> + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
> + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
> + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
> + .sysc_fields = &omap_hwmod_sysc_type1,
> +};
> +
> +static struct omap_hwmod_class mmc_class = {
> + .name = "mmc",
> + .sysc = &mmc_sysc,
> +};
> +
> +/* MMC/SD/SDIO1 */
> +
> +static struct mmc_dev_attr mmc1_dev_attr = {
> + .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
> +};
> +
> +static struct omap_hwmod_irq_info mmc1_mpu_irqs[] = {
> + { .irq = 83 },
> +};
> +
> +static struct omap_hwmod_dma_info mmc1_sdma_reqs[] = {
> + { .name = "tx", .dma_req = 61 }, /* DMA_MMC1_TX */
> + { .name = "rx", .dma_req = 62 }, /* DMA_MMC1_RX */
> +};
> +
> +static struct omap_hwmod_opt_clk mmc1_opt_clks[] = {
> + { .role = "dbck", .clk = "mmchsdb_fck" },
Also does not exist on OMAP2420.
> +};
> +
> +static struct omap_hwmod_ocp_if *omap2420_mmc1_slaves[] = {
> + &omap2420_l4_core__mmc1,
> +};
> +
> +static struct omap_hwmod omap2420_mmc1_hwmod = {
> + .name = "mmc1_hwmod",
> + .mpu_irqs = mmc1_mpu_irqs,
> + .mpu_irqs_cnt = ARRAY_SIZE(mmc1_mpu_irqs),
> + .sdma_reqs = mmc1_sdma_reqs,
> + .sdma_reqs_cnt = ARRAY_SIZE(mmc1_sdma_reqs),
> + .opt_clks = mmc1_opt_clks,
> + .opt_clks_cnt = ARRAY_SIZE(mmc1_opt_clks),
> + .main_clk = "mmchs1_fck",
> + .prcm = {
> + .omap2 = {
> + .module_offs = CORE_MOD,
> + .prcm_reg_id = 1,
> + .module_bit = OMAP2420_EN_MMC_SHIFT,
> + .idlest_reg_id = 1,
> + .idlest_idle_bit = OMAP2420_ST_MMC_SHIFT,
> + },
> + },
> + .slaves = omap2420_mmc1_slaves,
> + .slaves_cnt = ARRAY_SIZE(omap2420_mmc1_slaves),
> + .class = &mmc_class,
> + .dev_attr = &mmc1_dev_attr,
> + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
> +};
> +
> static __initdata struct omap_hwmod *omap2420_hwmods[] = {
> &omap2420_l3_main_hwmod,
> &omap2420_l4_core_hwmod,
> @@ -871,6 +958,7 @@ static __initdata struct omap_hwmod *omap2420_hwmods[] = {
> &omap2420_mpu_hwmod,
> &omap2420_iva_hwmod,
> &omap2420_wd_timer2_hwmod,
> + &omap2420_mmc1_hwmod,
> &omap2420_uart1_hwmod,
> &omap2420_uart2_hwmod,
> &omap2420_uart3_hwmod,
> diff --git a/arch/arm/plat-omap/include/plat/mmc.h
> b/arch/arm/plat-omap/include/plat/mmc.h
> index f57f36a..7821344 100644
> --- a/arch/arm/plat-omap/include/plat/mmc.h
> +++ b/arch/arm/plat-omap/include/plat/mmc.h
> @@ -43,6 +43,13 @@
>
> #define OMAP_MMC_MAX_SLOTS 2
>
> +/* omap_hwmod integration data */
> +#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(1)
Since it's not using the HSMMC driver, this is not going to do anything.
> +
> +struct mmc_dev_attr {
> + u8 flags;
> +};
> +
> struct omap_mmc_platform_data {
> /* back-link to device */
> struct device *dev;
> --
> 1.7.1
>
- Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
