Tony, > -----Original Message----- > From: Santosh Shilimkar [mailto:santosh.shilim...@ti.com] > Sent: Thursday, February 03, 2011 2:13 PM > To: Tony Lindgren > Cc: Anand Gadiyar; Russell King - ARM Linux; linux-arm- > ker...@lists.infradead.org; linux-omap@vger.kernel.org; Keshava > Munegowda; Felipe Balbi > Subject: RE: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: > 4430SDP boot failure) > > > -----Original Message----- > > From: Tony Lindgren [mailto:t...@atomide.com] > > Sent: Thursday, February 03, 2011 1:19 AM > > To: Santosh Shilimkar > > Cc: Anand Gadiyar; Russell King - ARM Linux; linux-arm- > > ker...@lists.infradead.org; linux-omap@vger.kernel.org; Keshava > > Munegowda; Felipe Balbi > > Subject: Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: > > 4430SDP boot failure) > > > > * Santosh Shilimkar <santosh.shilim...@ti.com> [110201 22:04]: > > > > > > > > It's a ES1.0 blaze, with the patch below it reboots early > > > > during the boot. I also have to disable omap_l2_cache_init > > > > on this board to get it to boot. > > > > > > > Do you still get this problem with 'omap_l2_cache_init' ? > > > As reported earlier, we don't see this issue on ES1.0 > > > SDP. > > > > Yeah I do, it rarely makes it to the userspace. Works reliably > > if I disable omap_l2_cache_init. > > > Ok. I shall try few experiments and try to reproduce it
Not sure if it's the same issue but I managed to reproduce the issue on ES2.0 itself. And after some experiments, it boiled down to the V6 and V7 issue. By disabling OMAP2 from the build, everything was fine again. Regards, Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
