Add pm_runtime support to dmtimer. Since dmtimer is used during
early boot before pm_runtime is initialized completely there are
provisions to enable/disable clocks directly in the code during
early boot.

Signed-off-by: Tarun Kanti DebBarma <tarun.ka...@ti.com>
[p-bas...@ti.com: added pm_runtime logic in probe()]
Signed-off-by: Partha Basak <p-bas...@ti.com>
Reviewed-by: Varadarajan, Charulatha <ch...@ti.com>
Acked-by: Cousson, Benoit <b-cous...@ti.com>
---
 arch/arm/plat-omap/dmtimer.c |   63 ++++++++++++++++++++++++++++++++++++------
 1 files changed, 54 insertions(+), 9 deletions(-)

diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 53f5205..fcac422 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -39,6 +39,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/pm_runtime.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <plat/dmtimer.h>
@@ -211,13 +212,16 @@ static void omap_dm_timer_prepare(struct omap_dm_timer 
*timer)
 {
        struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
 
-       timer->fclk = clk_get(&timer->pdev->dev, "fck");
-       if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) {
-               dev_err(&timer->pdev->dev, ": No fclk handle.\n");
-               return;
+       if (!pdata->is_omap16xx) {
+               timer->fclk = clk_get(&timer->pdev->dev, "fck");
+               if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) {
+                       dev_err(&timer->pdev->dev, ": No fclk handle.\n");
+                       return;
+               }
        }
 
-       omap_dm_timer_enable(timer);
+       if (!pdata->is_omap16xx)
+               omap_dm_timer_enable(timer);
 
        if (pdata->dm_timer_reset)
                pdata->dm_timer_reset(timer);
@@ -292,10 +296,22 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_free);
 
 void omap_dm_timer_enable(struct omap_dm_timer *timer)
 {
+       struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
+
        if (timer->enabled)
                return;
 
-       clk_enable(timer->fclk);
+       if (unlikely(pdata->is_early_init)) {
+               clk_enable(timer->fclk);
+               timer->enabled = 1;
+               return;
+       }
+
+       if (pm_runtime_get_sync(&timer->pdev->dev) < 0) {
+               dev_err(&timer->pdev->dev, "%s: pm_runtime_get_sync() FAILED\n",
+                       __func__);
+               return;
+       }
 
        timer->enabled = 1;
 }
@@ -303,10 +319,22 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
 
 void omap_dm_timer_disable(struct omap_dm_timer *timer)
 {
+       struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
+
        if (!timer->enabled)
                return;
 
-       clk_disable(timer->fclk);
+       if (unlikely(pdata->is_early_init)) {
+               clk_disable(timer->fclk);
+               timer->enabled = 0;
+               return;
+       }
+
+       if (pm_runtime_put_sync(&timer->pdev->dev) < 0) {
+               dev_err(&timer->pdev->dev, "%s: pm_runtime_put_sync() FAILED\n",
+                       __func__);
+               return;
+       }
 
        timer->enabled = 0;
 }
@@ -425,10 +453,12 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, 
int source)
        if (source < 0 || source >= 3)
                return -EINVAL;
 
-       omap_dm_timer_disable(timer);
+       if (!pdata->is_omap16xx)
+               omap_dm_timer_disable(timer);
        /* change the timer clock source */
        ret = pdata->set_timer_src(timer->pdev, source);
-       omap_dm_timer_enable(timer);
+       if (!pdata->is_omap16xx)
+               omap_dm_timer_enable(timer);
 
        /*
         * When the functional clock disappears, too quick writes seem
@@ -600,11 +630,26 @@ static int __devinit omap_dm_timer_probe(struct 
platform_device *pdev)
                return -ENODEV;
        }
 
+       /*
+        * OMAP2+
+        * Early timers are already registered and in list.
+        * What we need to do during second phase of probe
+        * is to assign the newly allocated/configured pdev
+        * to timer->pdev. We also call pm_runtime_enable()
+        * for each device because it could not be called
+        * during early boot because pm_runtime framework
+        * was not yet up and running.
+        */
        spin_lock_irqsave(&dm_timer_lock, flags);
        list_for_each_entry(timer, &omap_timer_list, node)
                if (!pdata->is_early_init && timer->id == pdev->id) {
                        timer->pdev = pdev;
                        spin_unlock_irqrestore(&dm_timer_lock, flags);
+                       pm_runtime_enable(&pdev->dev);
+                       /* update PM runtime for active early timers */
+                       if (timer->reserved)
+                               pm_runtime_get_sync(&pdev->dev);
+
                        dev_dbg(&pdev->dev, "Regular Probed\n");
                        return 0;
                }
-- 
1.6.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to